• The Magazine of the IEIE
• /
• v.30 no.3
• /
• pp.81-85
• /
• 2003

The advantages of using analogue optical networks for delivering radio signals from a central location to many remote antenna sites have been recognized. In a telecommnications context, radio signals may be for fixed radio access, cordless or mobile networks, but the same principles apply. By making use of the high bandwidth, low loss characteristics of optical fiber, all high frequency and signal processing functions can be performed centrally and signals can then be transported over the optical network directly at the carrier frequency. The remote sites then become very simple, requiring only optoelectronic conversion, filtering and linear amplification. This shifting of the complex functionality away from the remote site allow cheap, reliable, small and light-weight radio access points with low power consumption to be deployed. In this paper, we show that an electroabsorption modulation(EAM) may be used as a single component in such a radio access point, as a passive transceiver for small-sized cell(picocells).

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.58
• /
• pp.19-27
• /
• 2006

Technologies to utilize the limited frequency resource more efficiently in spatial and temporal are accelerated. In this paper cognitive algorithms as brain of cognitive radio, kind and characteristics of databases which are necessary parts for algorithm were reviewed and summarized. And an example of cognitive engine on which database and algorithm are executed was described also. Because the current status of development of technologies relating to cognitive radio is at the initial stage, the best database, algorithm and engine for a cognitive radio were not suggested, but the direction of development and factors to be considered during development of relating technologies were explained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.690-692
• /
• 2003

In this paper, we have investigated characteristics of radio frequency for double gate MOSFET with 50nm main gate in according to variation of side gate length. We could know the increasement of cut-off frequency as the side gate length is lower. As a result, we could know the most optimum performance characteristics when side gate length was 70nm. In this time, the DG MOSFET of side gate with 70nm has very high cut-off frequency like 41.4GHz.

• Journal of Navigation and Port Research
• /
• v.34 no.4
• /
• pp.299-304
• /
• 2010

In this paper, the EM wave absorber was developed for the 94-GHz detecting radar system. To analysis an EM wave absorber in millimeter wave band, we fabricated three absorber samples using carbon black and titanium dioxide and permalloy with chlorinated polyethylene. After measuring the complex relative permittivity, the absorption characteristics are simulated by 1D FDTD according to different thicknesses of less than 1.0 mm. Then, the EM wave absorber was fabricated based on the FDTD simulation. As a result, the measured results agreed well with the simulated ones, and the developed EM wave absorber with a thickness of 0.7 mm had the desired absorption characteristics of more than 14 dB in the frequency range of the 94-GHz band.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.5
• /
• pp.93-99
• /
• 1998

The chirping characteristics of InGaAsP electroabsorption modulatiors have been analyzed. The effective .alpha. parameters for large signal modulation were estimated by comparing the pulse shape after fiber transmission with constant chirping assumption.We investigated the structure and the operating condition of the modulator to improve the chirping characteristics. The .alpha. parameters were calculated as the function of wavelength detuning and the bias voltage. To minimize the chirping performance, high bias voltage and a small wavelength detuning and the bias voltage. To minimize the chirping performance, high bias voltage and a small wavelength detuning were preferred. An negative .alpha. value is achieved at the wavelength detuning below 30meV with a proper bias voltage so that pulse compression effect was expected.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1B
• /
• pp.108-113
• /
• 2002

Short range communications between road-side equipments and on-board equipment is very important for ITS(intelligent Transport System). Roadside communication is for short range communication, and needs performance of high data bit rate and should support the function for very short term communication. In addition to it, a radio propagation characteristics is very different according to a road environment. In this paper, for reliable roadside communication, the radio multi-path propagation profile at roadside is measured and the characteristics is analyzed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1653-1658
• /
• 2008

In this paper, it is analyzed propagation distribution characteristics of radio wave, which is radiated on all sides from Access Point device for estimating scheme of wireless AP without GPS receiver environment. To tracking AP device is traced from wireless terminals and wireless terminal is traced from fixed AP devices, above all it is important to analysis the characteristics of receiving power in according to distance. Therefore in this paper, radio propagation characteristics of 2.4GHz wave is analyzed effect extent and quality in according to distance in doors and out doors, and utilized to location estimation.

• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.30-35
• /
• 2017

Radio navigation aids are very important elements to provide information necessary for safe navigation using radio waves. Recently, the number of radio equipment using radio waves is increasing, and the air frequency interference by adjacent channels is very high. In addition, the use of irregular jamming that threatening radio navigation aids and satellite navigation system frequency is rapidly increasing. Therefore, it is urgent to ensure the safety of air waves. In this paper, we investigated the characteristics and frequency of the domestic navigation system. And we were analyzed the geographical separation standard for implementation of analysis program. Also, we implemented a program for the geographical separation distance analysis that applying international standards and recommended practices.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.694-700
• /
• 2013

Urban area is a representative environment of wireless channels in the mobile communication, building density has a different distribution depending on the location. Building density has affect to propagation prediction For this reason, building density is expected to affect to the channel characteristics, we need to analyze it. We measured channel characteristics in urban areas of Jeju island by channel sounder and $4{\times}4$ antenna. Channel characteristics considering the building density were derived based on the measured data in the urban area. In this paper, the measurement data is analyzed and channel characteristics are derived through MIMO Channel measurements at 700 MHz considering the building density in the urban area.

• Journal of The Korean Astronomical Society
• /
• v.28 no.1
• /
• pp.1-13
• /
• 1995

A list of radio sources in the field of Abell 2256 is presented at 1420 MHz. Also presented is the source count based on the list. This source count is taken with the sources above $7\sigma$ level at 1420 MHz. The overall characteristics of the count is consistent with that of a field where no galaxy cluster presents. The excess of radio sources due to the cluster is examined in the source count but it turned out to be unnoticiable as expected.