• Elastomers and Composites
• /
• 제25권4호
• /
• pp.273-279
• /
• 1990

The graft polymerization of 2-hydroxyethylmethacrylate(HEMA) and vinyltriethoxysilane(VTES) onto styrene-butadiene-styrene block copolymer(SBS) was carried out in toluene, with radical initiator such as benzoyl peroxide(BPO) and 2, 2'-azo-bis-isobutyronitrile(AIBIN) under nitrogen atmosphere. The degree of grafting was increased with the increases of the reaction temperature and time. And the effeciency of BPO was superior to that of AIBN. The mechanical properties and molecular weight of graft products were measured and the applicability as adhesive of plasticized PVC leather was examined.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.160-161
• /
• 2021

To prepare polyurethane coatings for top coatings of automobiles, acrylic resins containing 75% of solids were synthesized by a radical polymerization. The viscosity of the acrylic resins was increased with increasing OH values. Crosslinked acrylic-urethane clear coatings were obtained by curing reaction between the synthesized acrylic resins and hexamethylene diisocyanate(HDI) trimer(Desmodur N-3600). The physical properties from the following studies were carried out : viscosity(Zahn cup #2), adhesion, pensil hardness, and 60° specular gloss. Various properties of the acrylic-urethane clear coatings as top coatings of mobile coat were evaluated on the coating specimens. Adhesion property to a substrate, 60° specular gloss, and pencil hardness of prepared paint showed quite good properties.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.162-163
• /
• 2021

To prepare the waterborne silicone acrylic resin coatings, acrylic resin was prepared by a radical polymerization. Glass transition temperature(Tg) of the acrylic copolymer was fixed at 30℃ and the contents of tertiary amine monomer(DMAEMA), were varied to be 5, 10, 15 and 20 wt%, hydroxyl monomer, and carboxyl monomer were fixed 10 wt%, and 4 wt% respectively. γ-Glycidoxypropyltrimethoxysilane(GPTMS) containing epoxy group was used for curing agents. The eqivalent ratio of amine to epoxy was 1:1. The prepared coatings exhibited excellent adhesion to various substrates, and various physical properties of the coatings were satisfactory. The gloss retension and color difference were improved at low tertiary amine concentration. The coatings containing 10wt% tertiary amine concentration have especially good weather resistant properties.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.164-165
• /
• 2021

To prepare the good-adherent and weather-resistant acrylic resin coatings, acrylic resin was prepared by a radical polymerization. Glass transition temperature(Tg) of the acrylic copolymer was fixed at 30℃ and the contents of tertiary amine monomer(DMAEMA) was varied to be 5, 10, 15, 20 wt% respectively. γ-Glycidoxypropyltrimethoxysilane(GPTMS) containing epoxy group was used for curing agents and di-n-butyltindilaurate(DBTDL) was used for drying accelerator. The equivalent ratio of amine to epoxy was 1:1. The prepared coatings exhibited excellent adhesion to various substrates, and various physical properties of the coatings were satisfactory. The gloss retention and color difference were improved at low tertiary amine concentration. The coatings containing 10wt% tertiary amine concentration have especially good weather resistant properties.

• 임산에너지
• /
• 제23권1호
• /
• pp.45-68
• /
• 2004

The word of lignin is derived from the Latin word 'ligum' meaning wood. Lignin is complex polymer consisting of coniferyl alcohol, sinapyl alcohol and p-coumaryl alcohol unit and has an amorphous, three dimensional network structure which is hard to be hydrolyzed by acid. Lignin is found in the cell wall of plants lignified. The mode of polymerization of these alcohols in the cell wall lead to a heterogeneous branched and cross-linked polymer in which phenyl propane units are linked by carbon-carbon and carbon-oxygen bonds. This polymerization of precursors, p-coumaryl alcohol, coniferyl alcohol and sinapyl alcohol to lignin is formed by enzymic dehydrolyzation. The reaction is initiated by an electron transfer which results in the formation of resonance-stabilized phenoxy radical. The combination of these radicals produces a variety of dimers, trimers and oligomers and so on. Lignin research has been divided into basic and practical application field. The basic studies contains biosynthesis, chemical structure, distribution in the cell wall and reactivity by reductants, oxidants and organic solvents. The application research will be approached the reaction of lignin in various pulp making involving pulp bleaching and its effect on pulp qualities. Lignin also will be studied for the production of fine chemicals, polymer products and the conservation into an energy source like petroleum oil because the amount of lignin produced in pulp making process is more than 51,000,000 tons per year in the world. Both basic and application research must lay emphasis on the development for the utilization of lignin and the pulping process. But these researches can not be completed without understanding lignin structure containing functional groups. Therefore, this paper was focused on the review of lignin formulation which has been studied since 1948 in chronological order. This review was based on monomers, dimers, trimers and tetramers of phenyl propane unit structures which were isolated and identified by different methods from various wood.ious wood.

• 폴리머
• /
• 제38권5호
• /
• pp.671-675
• /
• 2014

본 연구에서는 잘 규정된 4-arm 스타형 및 선형 고분자를 합성하여 구조에 따른 구리 프탈로시아닌(CuPc)의 분산 안정성을 비교하였다. 분산제는 (2-dimethylamino)ethyl methacrylate(DMAEMA)와 poly(ethylene glycol) methyl ether methacrylate(PEGMA)를 사용하여 activators generated by electron transfer(AGET) 원자이동라디칼중합법(ATRP)으로 합성하였다. 합성된 고분자는 젤투과 크로마토그래피(GPC)와 핵자기 공명 분광법(NMR)을 사용하여 합성한 고분자들의 분자량 및 단량체의 조성을 결정하였다. 4-Arm 스타형 고분자 및 선형 고분자 분산제에서 stabilizing group인 PEGMA의 중합도를 조절하여 copper phthalocyanine(CuPc)의 분산 안정성에 미치는 영향을 연구하였다. PEGMA의 DP가 130인 4-arm 스타형 고분자를 사용한 경우 $25^{\circ}C$에서 7일 동안 CuPc의 분산상이 안정적으로 유지되었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.99-101
• /
• 1998

1. Introduction : The conventional grafting polymerization technique requires chemically reactive groups on the surface as well as on the polymer chains. For this reason, a series of prefunctionalization steps are necessary for covalent grafting. The surface prefunctionalizational technique for grafting can be used to ionization radiation, UV, plasma, ion beam or chemical initiators. Of these techniques, radiation method is one of the useful methods because of uniform and rapid creation of active radical sites without catalytic contamination in grafted samples. If the diffusion of monomer into polymer is large enough to come to the inside of polymer substrate, a homogeneous and uniform grafting reaction can be carried out throughout the whole polymer substrate. Radiation-induced grafting method may attach specific functional moieties to a polymeric substrate, such as preirradiation and simultaneous irradiation. The former is irradiated at backbone polymer in vacuum or nitrogen gas and air, and then subsequent monomer grafting by trapped or peroxy radicals, while the latter is irradiated at backbone polymer in the presence of the monomer. Therefore, radiation-induced polymerization can be used to modification of the chemical and physical properties of the polymeric materials and has attracted considerable interest because it imparts desirable properties such as blood compatibility. membrane quality, ion excahnge, dyeability, protein adsorption, and immobilization of bioactive materials. Synthesizing biocompatible materials by radiation method such as preirradiation or simultaneous irradiation has often used $\gamma$-rays to graft hydrophilic monomers onto hydrophobic polymer substrates. In this work, in attempt to produce surfaces that show low levels of anti-fouling of bovine serum albumin(BSA) solutions, hydroxyethyl methacrylate(HEMA) was grafted polypropylene membrane surfaces by preirradiation technique. The anti-fouling effect of the polypropylene membrane after grafting was examined by permeation BSA solution.

• 대한화장품학회지
• /
• 제36권1호
• /
• pp.17-32
• /
• 2010

본 총설에서는 이산화탄소에 용해력이 있는 새로운 탄화수소 공중합체의 설계와 개발, 그리고 생체친화성 고분자의 초임계 중합을 위한 효과적인 계면활성제로써의 성능에 대해 소개하고, 초입계 유체의 기본적 개념을 용매로서의 성질과 고분자 합성분야에서의 응용적인 측면에서 기술한다. 이산화탄소에 높은 용해력을 지닌 탄화수소 고분자 중합을 위해 새로운 리빙라디칼 중합기술을 사용하였고, 이 물질들의 이산화탄소 내에서의 상거동을 측정하여 공중합체의 분자량과 구조가 용해도에 미치는 영향을 조사하였다. 초임계 분산중합에서의 효과적인 계면활성력을 확인하였고, 성장하는 입자의 안정화에 필요한 키 파라미터를 결정하기 위해 다양한 조건에서 실험을 수행하였으며, 화장품 분야에 응용될 수 있는 새로운 구조의 친환경 고분자 소재 개발에 이 연구가 작용될 수 있다는 잠재적인 가능성을 확인하였다.

• 멤브레인
• /
• 제21권2호
• /
• pp.193-200
• /
• 2011

원자전달 라디칼 중합(ATRP)에 의해 poly(vinyl chloride) (PVC) 주사슬과 poly(styrene sulfonic acid) (PSSA) 곁사슬로 되어있는 양쪽성 PVC-g-PSSA 가지형 공중합체를 합성하였다. PVC-g-PSSA 가지형 공중합체 고분자를 템플레이트로 사용하고 졸겔법을 적용하여, 결정성 아타네제상의 미세기공 이산화티타튬 필름을 제조하였다. $TiO_2$ 전구체인 TTIP를 친수성인 PSSA 영역과 선택적으로 작용시켜 $TiO_2$ 메조기공 필름을 성장하였으며, 이를 주사전자 현미경 (SEM)과 엑스레이회절 (XRD)분석을 통해 분석하였다. 스핀코팅 횟수와 P25 도입에 따른 염료감응 태양전지 성능을 체계적으로 분석하였다. 그 결과 준고체 고분자 전해질을 이용하였을 때, 100 mW/$cm^2$ 조건에서 에너지 변환 효율이 2.7%에 이르렀다.

• 멤브레인
• /
• 제21권3호
• /
• pp.222-228
• /
• 2011

Poly(vinyl chloride)-g-poly(oxyethylene methacrylate) (PVC-g-POEM) 가지형 공중합체를 원자전달라디칼 중합을 통해 합성하여 전기변색소자의 전해질에 적용하였다. 가소화된 고분자 전해질은 가소제로서 propylene carbonate (PC)/ethylene carbonate (EC) 혼합물을 도입하여 제조하였으며, Lithium tetrafluoroborate ($LiBF_4$), lithium perchlorate ($LiClO_4$), lithium iodide (LiI) and lithium bistrifluoromethanesulfonimide (LiTFSI)를 사용하여 염의 종류에 따른 영향을 조사하였다. 광각 x-선 산란(WAXS)과 시차주사 열량법(DSC) 측정 결과 고분자 전해질의 구조와 유리전이온도($T_g$)가 변하였고, 이는 POEM 내의 에테르의 산소와 리튬염 사이의 상호작용으로 인해 변했다는 것을 FT-IR 분광법을 통하여 확인하였다. 투과전자현미경(TEM) 측정 결과 PVC-g-POEM 가지형 공중합체의 미세상분리 구조가 PC/EC와 리튬염의 도입에도 변하지 않는 것을 관찰하였다. 가소화된 고분자 전해질은 poly(3-hexylthiophene) (P3HT) 전도성 고분자를 이용한 전기변색소자에 적용되었다.