• 대한전자공학회논문지
• /
• 제25권6호
• /
• pp.647-653
• /
• 1988

A rapid thermal annealing system using tungsten halogen lamp has been designed and assembled. A control scheme where the temperature control is executed with calculated wafer temperature by considering the thermocouple delay rather than measured thermocouple temperature,is proposed. This control scheme gives more accurate control of the wafer temperature. In addition, the distribution of transmitted light power to the wafer in the system has been simulated, and lamp interval modification has been able to give more uniform light power distribution. Considering incident light spectrum, absorption, reflection, radiation of silicon, etc., temperature profile has been simulated. When the light power uniformity on the 3" wafer is below 1%, the temperature uniformity is about 2%.

• 산업기술연구
• /
• 제26권A호
• /
• pp.81-88
• /
• 2006

The Chun-cheon Citizen's Bell was cast in memory of hosting the 2010 world leasure conference and a striking ceremony was held at the city hall on December 31, 2005. In this study, vibration and sound of the bell are measured and the property of the magnificent sound of the bell is scientifically investigated. Frequency components making the sound are identified and how the frequency components decrease with time is observed using waterfall plot(3-dimensional frequency spectrum). Beat characteristics of the hum(1st frequency) and the fundamental(2nd frequency)are examined by experiment. Directivity of the sound radiation of the bell is examined by measuring the vibration and sound in several directions. Duration of the vibration and the sound is estimated using damping ratio.

• Journal of Electrical Engineering and Technology
• /
• 제6권3호
• /
• pp.356-363
• /
• 2011

Vibrations and noise in electrical machines are directly related to the characteristics of the radial forces on one hand, and mechanical behavior on the other [1, 4]. The characteristics of these forces depend on the air gap flux density, which is also influenced by other factors, such as stator slots and poles, saturation level, winding type, and certain faults. The aim of this work is to investigate the effect of eccentricity and demagnetization faults on electromagnetic noise generated by the external surface of Permanent Magnet Synchronous Machine [PMSM]. For this purpose, an analytical electromagnetic vibroacoustic model is developed. The results confirm the effect of eccentricity and demagnetization fault in generating some low modes radial forces.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 1995년도 학술대회
• /
• pp.69-74
• /
• 1995

An object color can be seen differently under the various outer illuminants. However, human visual system has color constancy that the object color can be seen constantly under the different outer illuminants. When the viewer watches TV under specific outer illuminants, he perceives distorted color due to the emitting spectrum of outer illuminants as well as the radiation of CPT itself. Namely, when the outer illuminants such as fluorescent and incandescent lamps incident on CPT, brightness, saturation, hue, and contrast on color pictures are changed, he perceives distorted color from the original color. In this paper color enhancement algorithm based on light intensity and outer light decision function using RGB sensor was proposed. The implemented TV of proposed algorithm has higher visual quality at the view point of human visual system and more vivid than that of conventional color TV.

• 한국진공학회지
• /
• 제3권3호
• /
• pp.275-279
• /
• 1994

Low Energy Electron Diffraction(LEED)와 Synchrotron Radiation Photoelectron Spe-ctroscopy (SRPES)를 이용하여 $Si(111)7{\times}7$ 표면위에 Mg의 흡착에 의한 초기계면과 실리사이드의 형성에 대하여 연구하였다. 기판온도를 상온으로 유지하는 경우 증착량의 증가에 따라 LEED pattern은 diffuse 7${\times}$7 diffuse 1${\times}$1, $2/3sqrt{3}{\times}2/3sqrt{3} R30^{\cdot}$ 구조로 변화하였다. $300^{\cdot}C$의 기판온도에서 관측되는 1${\times}$1 구조에 대한 surface sensitive Si 2p core level spectrum의 fitting 결과로부터 이 1${\times}$1구조는 적층성장한 Mg2Si 박막에 의한 구조임을 알수 있다. 그러나 이 1${\times}$1구조를 가진 Mg2Si 박막이 성장하지 못함을 예상할 수 있다. 그결과 Mg의 계속된 증착에도 불구하고 비정질의 Mgqkr막이 성장하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.82-85
• /
• 1996

It is considered that the effect of radiation aging, such as electron beam due to the ultra-high voltage for transmission, on the physical properties and electrical characteristics of electrital insulating materials. Low-density polyethylene(thickness 100[${\mu}{\textrm}{m}$]) is selected as an experimental specimen. Fourier transform infra-red spectrum, X-ray diffraction, differential scanning calorimetry and scanning electron microscopy is used so as to analysis the physical properties, the morphological changes and the crystallinity of LDPE. And it is made an experiments of dielectric characteristics in the temperature range of 20[$^{\circ}C$]~120[$^{\circ}C$], in the frequency range of 30[Hz]~1.5$\times$10$^{5}$ [Hz] and in the applied voltage range of 300[mV]~1500[mV].

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.521-526
• /
• 2004

This paper introduces works performed for reducing high frequency noise of a reciprocating compressor. Noise in a high frequency range strongly affects sound quality as well as increases total noise level of the compressor. In order to reduce the noise, two different works were carried out. the first work was to measure the vibration Power transferred through suspension spring and discharge pipe; and the second one was to obtain operational deflection shape from cross-power spectrum measured on shell. Based on the information, Adequate structural modification of the transfer path and shell resulted in noise reduction in a high frequency range.

• Nuclear Engineering and Technology
• /
• 제40권7호
• /
• pp.533-538
• /
• 2008

In some situations, for example at very low doses, in microbeam irradiation experiments, or around high energy heavy ion tracks, use of the absorbed dose to describe the energy transferred to the irradiated target can be misleading. Since absorbed dose is the expected value of energy per mass it takes into account all of the targets which do not have any energy deposition. In many situations that results in numerical values, in Joules per kg, which are much less than the energy deposited in targets that have been crossed by a charged particle track. This can lead to confusion about the biochemical processes that lead to the consequences of irradiation. There are a few alternative approaches to describing radiation that avoid this potential confusion. Examples of specific situations that can lead to confusion are given. It is concluded that using the particle radiance spectrum and the exposure time, instead of absorbed dose, to describe these irradiations minimizes the potential for confusion about the actual nature of the energy deposition.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2594-2600
• /
• 2020

A gamma camera system using radionuclide has a functional imaging technique and is frequently used in the field of nuclear medicine. In the gamma camera, it is extremely important to improve the image quality to ensure accurate detection of diseases. In this study, we designed a blind-deconvolution framework after a noise-reduction algorithm based on a non-local mean, which has been shown to outperform conventional methodologies with regard to the gamma camera system. For this purpose, we performed a simulation using the Monte Carlo method and conducted an experiment. The image performance was evaluated by visual assessment and according to the intensity profile, and a quantitative evaluation using a normalized noise-power spectrum was performed on the acquired image and the blind-deconvolution image after noise reduction. The result indicates an improvement in image performance for gamma camera images when our proposed algorithm is used.

• 대한조선학회논문집
• /
• 제41권1호
• /
• pp.8-14
• /
• 2004

As the number of offshore structure is glowing in deep waters, there have been increased damages of it. These floating structures in offshore locations exposed to harsh environmental conditions. In recent years, there has been a slowing attention around damages on bow and deck on FPSO caused by waves in steep storm condition. This paper describes a study of the water on deck due to the dynamic behavior of a FPSO with turret mooring system. The nonlinear motions of the FPSO are simulated under external forces due to wave, current, wind, and mooring forces in the time domain. The direct integration method is employed to estimate low frequency drift wave forces. The current forces are calculated by using slow motion maneuvering equations in the horizontal plane. The coefficients of a model for wind forces are calculated from Isherwood's experimental data and the variation of wind speed is estimated by wind spectrum according to the guidelines of API-RP2A.