• 제목/요약/키워드: Radiation field Size

검색결과 386건 처리시간 0.023초

저궤도위성 궤도운동 및 자세에 영향을 미치는 외부교란토크 분석

  • 최홍택;용기력;이승우
    • 항공우주기술
    • /
    • 제2권1호
    • /
    • pp.54-62
    • /
    • 2003
  • 우주공간상의 위성체는 아주 미세한 크기에 불과하지만 여러 가지 원인에 의한 외부교란토크를 받는다. 외부교란토크는 위성체의 궤도 운동뿐만 아니라 위성체의 자세에도 큰 영향을 미친다. 저궤도위성의 자세동역학에 작용하는 외부교란토크는 다양하다. 이러한 것들 중 중요한 4가지 원인은 중력경도, 지구자기장, 태양복사압 및 대기저항 등을 들 수 있다. 본 연구에서는 저궤도위성과 같은 저궤도위성에 작용하는 외부교란토크를 상세히 분석하고 저궤도위성 자세동역학에 미치는 외부교란토크의 영향을 상세히 기술한다.

  • PDF

Hand effect를 최소화한 평판 격자형 UHF대역 RFID 리더 안테나에 관한 연구 (A Study on a Planar Folded RFID Reader Antenna by Minimizing Hand Effects For UHF Band Application)

  • 박정근;이종철
    • 한국ITS학회 논문지
    • /
    • 제11권4호
    • /
    • pp.80-85
    • /
    • 2012
  • 본 논문에서는 새로운 평판 격자형 UHF대역 RFID 리더 안테나를 제안한다. 본 논문에서 제안된 안테나는 4개의 PIFA (Planar Inverted F Antenna)형의 마이크로 스트립 안테나를 사용하였다. 안테나의 크기는 $50mm{\times}50mm{\times}6.2mm$ 이며 안테나의 이득은 1.1 dBi 이고 정재파비는 1.2:1, 안테나 효율은 63.3 %, 방사패턴은 상위 방향으로 설계되었다. 본 논문에서는 4개의 PIFA형 안테나를 입체 구조로 사용함으로써 안테나의 이득과 효율에는 크게 차이가 없으나 일반적인 PIFA 안테나에 비해 50% 사이즈 감소로 소형화하고 손의 영향(hand effect)을 최소화하여 태그의 인식성능을 크게 향상시켰다.

ML-6M선형 가속기에서의 BEAM 특성에 대한 고찰

  • 문언철;윤병운;오양환
    • 대한방사선치료학회지
    • /
    • 제5권1호
    • /
    • pp.115-119
    • /
    • 1992
  • The beam characteristics and dosimetric measurements of the 6MV X-ray and 6MeV electron beam from a ML-6M linear accelerator are examined. The Percent Depth Dose(PDD) table and the tissue Maximum Ratio(TMR) table are taken from measurement as a function of the field size and the depth. The calculated TMR table from PDD table is compared with those from measurement. Other beam characteristics such as output factor, beam profile(including flatness, symmetry and penumbra), wedge, and the variation of Dmax are presented. All of these dosimetric measurements sufficiently characterized the beam to permit safe clinical use.

  • PDF

두께 균일도 향상을 위한 LPCVD 챔버 내 웨이퍼 온도 분포 분석 (Analysis of temperature distribution of wafers inside LPCVD chamber for improvement of thickness uniformity)

  • 강승환;김병훈;공병환;이재원;고한서
    • 한국가시화정보학회지
    • /
    • 제14권2호
    • /
    • pp.25-30
    • /
    • 2016
  • The wafer temperature and its uniformity inside the LPCVD chamber were analyzed. The temperature uniformity at the end of the wafer load depends on the heat-insulating cap. The finite difference method was used to investigate the radiation and conduction heat transfer mechanisms, and the temperature field and heat diffusion in the LPCVD chamber was visualized. It was found that the temperature uniformity of the wafers could be controlled by the size and distance of the heat-insulating cap.

THERMAL PROPERTIES OF SMALL GRAINS WITH FLUCTUATING TEMPERATURE UNDER DIFFUSE INTERSTELLAR RADIATION FIELD

  • Hong, Seung-Soo
    • 천문학회지
    • /
    • 제12권1호
    • /
    • pp.27-34
    • /
    • 1979
  • Temperature history of very small interstellar dust particles is followed under diffuse interstellar radiation. Because of extremely small thermal capacities of these grains with sizes ranging from a few tens to hundred Angstroms in radii, they are to experience strong fluctuations in temperature whenever they are hit by interstellar ultraviolet photons. Fluctuating temperature can inhibit these smaller component of interstellar dust from growing into core-mantle particles of submicron sizes by continuously evaporating atoms and molecules adsorbed on their surface. This is interpreted as a possible physical reason for the bimodal nature in grain size distribution. A brief discussion is also given to the far infrared emission properties of such small grains in diffuse interstellar dust clouds.

  • PDF

6MV X선에 있어서 쇄기형 조사야와 개방 조사야 사이의 깊이 선량률의 차이 (Variation in Depth Dose Data between Open and Wedge Fields for 6 MV X-Rays)

  • 우홍;류삼열;박인규
    • Radiation Oncology Journal
    • /
    • 제7권2호
    • /
    • pp.279-285
    • /
    • 1989
  • Tatcher식에 의하여 조직최대선량비와 깊이선량을 6MV X-선의 중심축상에서 측정하였다. 쐐기형 조사야에 있어서 깊이, 조사야 및 쐐기의 두께 등이 증가할수록 깊이선량은 개방 조사야에 비하여 크기가 증가하였다. 그러나 쐐기형 조사야에 있어서 조직산란보정 계수는 개방 조사야에 비하여 그 차이가 $1\%$ 미만이었다. 두 조사야에 있어서 중심축상의 깊이선량백분률의 차이가 발생하는 것은 쐐기에 의해서 X-선이 강화됨을 의미한다. 같은 각도의 쇄기에서 깊이선량백분률과 산란보정계수의 명목쐐기형 조사야와 유효쐐기형 조사야사이의 차이는 없었다. 개방조사야에서 조사야 $6cm{\times}6cm$, 깊이 7cm의 깊이선량백분률은 명목 또는 유효쐐기형 조사야 보다 $3.26\%$가 더 컸다. 그러나 조사야 $(10cm{\times}10cm)$가 커질수록 깊이선량백분률의 차이는 명목 또는 유효쐐기형 조사야보다 더 증가하였다-선량계측차이는 깊이 7cm에서 $3.56\%$, 12cm에서는 $5.30\%$였다 그러므로 심부종양치료시 선량의 계산이나 모니터세팅은 각 쐐기의 깊이 백분선량률과 투과율을 사용하여야 오차를 줄일 수 있을 것으로 사료된다.

  • PDF

물질을 투과한 고에너지 전자선의 선량변화 (Studies on the Interaction of High Energy Electron with Various Matters)

  • 추성실;김귀언;박창윤
    • Radiation Oncology Journal
    • /
    • 제1권1호
    • /
    • pp.11-19
    • /
    • 1983
  • Interaction between high energyelectrons and matters had many complex reactions and the high energy electrons lost their energies with collision and scattering, therefore, electrons distribution in matters was shown as various situation by scattering, exciting and ionizing with moleculars. We experimentally studies with 13 MeV Linear Accelerator and thermoluminescence dosimeter using aluminium and Teflon, etc., and measured energy loss of electrons, electron range, electron scattering and dose distribution in matter. We compared the results with theoretical formular, between 4-qw MeV, the energy loss of electrons was decreased by 2 MeV per $1g/cm^2$ but under 1MeV it was rapidly decreased. Electron range in matter reached to $0.5/cm^2$ per 1MeV of incident energy at 6-12MeV. The dose distribution in matter was increased slightly to some depth by total distribution i.e., the combined intensity of primary and secondary radiant and it was rapidly decreased near the maximum range of electrons. Energy loss of electrons and electron range measured by experiment were coincided with theoretical equations of L. Landau and Feather under 5 and 3% errors respectively. The dose distribution of electrons in matter was similar to L.V. Spencer formular, however, we had found that it was quite different in accordance with the field size and that new formular of dose distribution was induced as empirical function contained experimental factors according to field size.

  • PDF

수직한 방사패턴을 형성하는 이중대역 비대칭 배열 메타물질 안테나 (A Dual-Band Asymmetrical Metamaterial Antenna for Orthogonal Radiation Patterns)

  • 표성민;한상민;이동효;김영식
    • 한국산학기술학회논문지
    • /
    • 제10권9호
    • /
    • pp.2246-2252
    • /
    • 2009
  • 본 논문에서는 메타물질 특성을 가지는 단위 구조의 비대칭 배열을 이용하여 서로 수직한 방사패턴을 형성하는 이중대역 메타물질 안테나를 제안하였다. 제안된 안테나는 메타물질 단위 구조를 비대칭 주기배열로 인하여 2개의 수직한 공진 모드를 발생시킨다. 2개의 수직한 공진 모드는 안테나의 선형 편파 특성을 변화시키지 않고, 오직 방사패턴만 수직하게 형성하는 특징을 가지고 있다. 본 논문에서는 안테나 표면에서는 전계분포의 분석을 통하여 수직한 공진 모드를 분석하였으며, 측정 실험을 통해 안테나의 성능을 검증하였다. 제안된 안테나는 각각의 공진주파수에서 y축과 x축 방향으로 서로 수직한 방사패턴을 가지고 있으며, 각각 3.34 dBi 와 3.86 dBi 의 안테나 이득을 나타내었다. 또한 안테나의 크기 감소와 방사효율 증가를 위하여 동일한 안테나의 접지면에 슬롯을 적용하여, 크기 감소와 12 % 와 27 % 의 방사효율 증가 효과를 실험적으로 검증하였다.

Gafchromic EBT2필름과 다양한 검출기를 이용하여 $3cm^2$ 이하의 소조사면에서 출력비율의 선량검증 (Dosimetric Verifications of the Output Factors in the Small Field Less Than $3cm^2$ Using the Gafchromic EBT2 Films and the Various Detectors)

  • 오세안;예지원;이레나;박헌보;김성규
    • 한국의학물리학회지:의학물리
    • /
    • 제25권4호
    • /
    • pp.218-224
    • /
    • 2014
  • 소조사면의 선량검증은 고선량을 1회에 치료하는 정위적방사선수술(Stereotactic radiosurgery, SRS)과 고선량을 소분할 하여 치료하는 소분할방사선치료(hypo-fractionated radiotherapy)에서 작은 크기의 종양을 치료하기 위해서 자주 사용되기 때문에 현대의 방사선치료에서 있어서 매우 중요하다. 그러나, $3cm^2$ 이하의 소조사면에 대한 선량검증은 방사선치료에서 있어서 대단한 도전이다. 소조사면의 선량검증은 (a) 측방전자균형(lateral electronic equilibrium)의 부족, (b) 급격한 선량 기울기(steep dose gradient), (c) 선원의 부분적 차폐 때문에 어렵다. 이 연구의 목적은 6 MV 광자선의 $3cm^2$ 이하의 소조사면에서 출력비율을 다양한 검출기로 측정하고 검증하는 것이다. 출력비율은 CC13 이온함, CC01 이온함, EDGE 검출기, 열발광선량계(thermoluminescence dosimeters, TLD), Gafchromic EBT2 필름을 이용하여 $0.5{\times}0.5cm^2$, $1{\times}1cm^2$, $2{\times}2cm^2$, $3{\times}3cm^2$, $5{\times}5cm^2$, $10{\times}10cm^2$의 다양한 조사면에서 측정하였다. 출력비율의 차이는 조사면의 크기가 작아질수록 검출기간의 차이는 증가하였다. 본 연구의 결과는 $3cm^2$ 이하의 소조사면의 선량측정은 CC01 이온함, EDGE 검출기와 같은 작은 크기의 방사부부피(active volume)를 가지는 검출기를 사용해야 한다는 것을 입증하였다. 또한, $3cm^2$ 이하의 소조사면에서 EDGE 검출기의 출력비율은 Gafchromic EBT2 필름의 결과와 잘 일치하였다.

An ionization Chamber for a Steel Sheet Thickness Measurement

  • Kim, Han-Soo;Park, Se-Hwa;Kim, Yong-Kyun;Ha, Jang-Ho;Cho, Seung-Yeon
    • Journal of Radiation Protection and Research
    • /
    • 제31권3호
    • /
    • pp.149-153
    • /
    • 2006
  • An ionization chamber is still widely used in many fields by virtue of its' simple operational characteristics and the possibility of its' various shapes. A parallel type of an ionization chamber for a steel sheet thickness measurement was designed and fabricated. High pure xenon gas, which was pressurized up to 6 atm, was chosen as a filling gas to increase the current response and sensitivity for a radiation. A high pressure gas system was also constructed. The active volume and the incident window size of the fabricated ionization chamber were $30\;cm^3\;and\;12\;cm^2$, respectively. Preliminary tests with a 25 mCi $^{241}Am$ gamma-ray source and evaluation tests in a standard X-ray field were performed. The optimal operation voltage was set from the results of the collection efficiency calculation by using an experimental two-voltage method. Linearity for a variation of the steel sheet thickness, which is the most important factor for an application during a steel sheet thickness measurement, was 0.989 in this study.