• 한국추진공학회지
• /
• 제4권3호
• /
• pp.45-54
• /
• 2000

Ignition transient is a. very rapid process lasting only in the order of 100 milliseconds and therefore it is difficult to measure all relevant ballistic properties. Numerical simulation is thus useful to quantify some of these hard to measure flow and ballistic properties. One-dimensional model was employed to study the effects of aging using simplified aging scenarios for both N-H sustainer and booster motors. Also the effects of newly designed igniter on the ignition of N-H sustainer was simulated. Radiation effects could be significant in terms of energy flux increase to the propellant surface and the energy exchange between the combustion gas itself. One dimension implementation of radiation showed significant effects for rear-mounted igniter. Implementation of radiation effects into 2-D axi-symmetric numerical model was completed and its effects on the N-H sustainer were examined. To have a reliable prediction of computer model on ignition transient, accurate chemical property data on the propellant and igniter gas are required. It was found that such property data on aged N-H motors are not available. Chemical aging model can be used to predict to some degree of accuracy effects of aging on chemical and mechanical properties. Such a model was developed, albeit 2-dimensional, to study migration of moisture through a representative solid rocket motor configuration.

• 조명전기설비학회논문지
• /
• 제24권12호
• /
• pp.25-32
• /
• 2010

Compared to general lighting method, the lighting system that uses optic fiber can provide only the visible light of good quality to subject by eliminating ultraviolet ray and infrared ray. Thanks to this merit, it is possible to prevent the hard phenomenon of subject caused by ultraviolet ray and infrared ray and to provide the agreeable light environment. This study developed indoors illumination system of high color rendering on the basis of plastic optic fiber with excellent optical property and processing to substitute halogen lamp which has been used for excellent color rendering in spite of low efficiency and short life. Producing pilot product of the designed illumination system and evaluating the property of electric and optical property, ultraviolet ray radiation quantity and temperature property, this study verified the excellence of suggested lighting system of plastic optic fiber.

• 방사선산업학회지
• /
• 제5권4호
• /
• pp.383-391
• /
• 2011

This study was conducted to investigate the applicability of gamma irradiation for improving the quality of paprika and Japanese apricot extract-treated nitrite free pork jerky. Pork jerky was gamma-irradiated at 0, 3, 5, 7 and 10 kGy and physiochemical properties such as proximate composition, 2-thiobarbituric acid (TBARS) values, color stability, texture, and sensory property were then evaluated. The results showed that the treatment of paprika and Japanese apricot extract to the pork jerky increased Hunter color value and texture property and at the same time decreased TBARS values. When gamma irradiated, natural pigment extract-treated pork jerky did not produce any change in its proximate composition (moisture, crude protein, crude lipid contents), and TBARS values. However, the redness (a-value) of pork jerky increased as the irradiation dose increased, whereas shear force of pork jerky was decreased. Sensory result showed that gamma irradiation induced to decrease the sensory scores. Therefore, these results suggest that gamma irradiation and the addition of paprika and Japanese apricot extracts could be an effective mean to improve color and texture of restructured pork jerky without use of nitrite.

• 대한기계학회논문집B
• /
• 제20권9호
• /
• pp.2933-2943
• /
• 1996

A grating composed of elliptical cylinders (GEC), specially designed, is applicable to control of radiation heat transfer from a heated surface, as reported in our previous work. In this study, an analysis of radiation heat transfer is performed for a physical model in which the GEC is placed in front of a heated black-base surface and the major axes of the elliptical cylinders are inclined as a certain angle from the normal to the row of elliptical cylinders. Numerical solutions are obtained. Variations of the direction and the radiative energy concentration with slant angle of the major axis are shown for some parameters. It is verified that the GEC is able to widely change the direction of radiation heat transfer from the heated surface.

• 방사선산업학회지
• /
• 제7권1호
• /
• pp.23-28
• /
• 2013

In this study, we fabricated high density polyethylene (HDPE) composites filled with antioxidants and UV stabilizers. The electron beam irradiation on the fabricated composites was carried out over a range of absorbed doses from 50 to 200 kGy to confirm the changes of discoloration. The changes of discoloration were characterized using a color difference meter and FT-IR for confirming the changes of the color difference and structural change. It was observed that the color difference of IRGANOX 1010-, IRGAFOS 168-, and TINUVIN 328- added HDPE was higher than that of the control HDPE by electron beam irradiation. The melting temperature of UV stabilizer-added HDPE was not significantly changed by electron beam irradiation. However, the melting temperature of phenol-containing antioxidant-added HDPE was increased with increasing the absorbed dose. And the melting temperature of phosphorus-containing antioxidant-added composite was decreased with increasing the absorbed dose.

• 한국음향학회지
• /
• 제29권7호
• /
• pp.422-430
• /
• 2010

Tonpilz 트랜스듀서의 방사 패턴은 구조 변수들에 의해 많은 영향을 받는다. 본 연구에서는 단일 모드 Tonpilz 트랜스듀서에 대해서 동일한 유효 면적을 가지는 다양한 전면추 형상에 따른 방사 패턴을 계산하였다. 트랜스듀서의 전면추 형상은 가장 많이 사용되는 원형과 정삼각형, 정사각형, 정육각형 및 정팔각형에 대해 분석하였으며, 각 형상에 대해 방사 패턴 수식을 유도하였다. 유도한 수식을 바탕으로 전면추 형상과 크기에 따른 방사 패턴의 변화를 해석하고, 서로의 특성을 비교하였다. 계산 결과의 타당성은 유한 요소 해석을 이용하여 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.588-591
• /
• 2002

Radiation technology is an effective way for regulating polymeric materials to physicochemical and mechanical properties. The effect of radiation on mechanical and electrochemical properties of new rubber-like polymeric composite materials based on poly(vinyl ether of ethyleneglycol : PVEEG) have been studied for investigating mechanical and electric property of polymer composites applications.

• 한국축산식품학회:학술대회논문집
• /
• 한국축산식품학회 2004년도 정기총회 및 제33차 춘계 학술대회
• /
• pp.181-184
• /
• 2004

This study was conducted to investigate the adequate irradiation dose to eliminate harmful fungi inoculated if beef jerky with a 10% higher moisture content and improved textural property. Aspergillus flavus (approximately $10^6\;CFU/cm^2$) was tested in broth, spore suspension, and inoculated jerky. $D_{10}$ values of A. flavus were 0.36 kGy in the broth and suspension, and 0.47 kGy in the jerky. The results indicate that gamma irradiation can be effectively used to control the fungus growth in beef jerky with an improved quality and higher moisture content.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1205-1211
• /
• 2004

This study has investigated radiation degradation of chloroprene rubber in the presence of some fire retardant. Ammonium polyphosphate, aluminium trihydroxide, magnesium hydroxide, calcium carbonate and antimony trioxide were selected as flame retardant. Samples were irradiated using a Co$^{60}$ ${\gamma}$ -ray and ray up to 2000 kGy at a dose rate of 5 kGy/hr in the presence of air atmosphere at room temperature. After irradiation, samples were assessed fire retardancy with electrical properties and mechanical properties. Some considerations concerning the effects of the fire retardants added to chloroprene rubber on the radiation and thermal stability of chloroprene rubber are presented. From fire retardancy with electrical and mechanical property measurements, it was found that addition of magnesium hydroxide resulted in maximum fire retardant effect.

• 방사선산업학회지
• /
• 제6권1호
• /
• pp.95-100
• /
• 2012

In this study, there has been investigated the simulation of irradiation dose using Monte Carlo methodology for the biological control of wooden cultural property. In the evaluation of fungal contamination on wooden cultural properties, Cladosporium tenuissimum, Aspergillus versicolor, Penicillium sp. were mainly identified from the Gimjeotgae. But these microorganisms were completely inactivated by 20 kGy gamma-rays. For dosimetry simulation of wooden cultural properties, Monte Carlo methodology with MCNP was used. The radiation absorbed dose distribution was predicted at 8.2~18.9 kGy. These results show that irradiation is effective for biologic control of wooden cultural properties and Monte Carlo methodology is useful for non-destructive conservation and preservation of wooden cultural properties.