• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.51-56
• /
• 2017

This paper presents an approach of predicting the radiated noise due to the structural vibration by internal harmonic forces using the doubly asymptotic approximation (DAA). Acoustic transfer vector is derived from the Helmholtz integral equation and the fluid-structure interaction relation of DAA. Numerical results and analytical results of radiated noise for a cylindrical shell were compared and showed that they were consistent in most of frequencies and radiation directions, but showed errors in some radiated directions in the mid-frequency region. Despite these errors, the prediction method will be suitable for practical radiated noise prediction.

• Journal of Astronomy and Space Sciences
• /
• 제19권2호
• /
• pp.89-96
• /
• 2002

General along-track acceleration was estimated in the KOMPSAT-1 orbit determination process. Several sets of the atmospheric drag and solar radiation pressure coefficients were also derived with the different spacecraft area. State vectors in the orbit determination with the different spacecraft area were compared in the time frame. The orbit prediction using the estimated coefficients was performed and compared with the orbit determination results. The orbit prediction with the different general acceleration values was also carried out for the comparison

• 소음진동
• /
• 제10권3호
• /
• pp.444-450
• /
• 2000

Wheel-rail noise is normally classified into three catagories : rolling impact and squeal noise. In this paper rolling noise caused by the irregularity between a wheel and a rail is analysed as follows: The irregularity between the wheel and the rail is assumed as linear superposition of sinusoidal profiles. Wheel-rail contact stiffness is linearized by using Hertzian contact theory and then contact force between the wheel and the rail is calculated. vibration of the rail and the wheel is calculated theoretically by receptance method or FEM depending on the geometry of the wheel or the rail for the frequency range of 100-500 Hz important for noise generation. The radiation noise caused by those vibration response is computed by BEM To verify this analysis tools rolling noise is calculated by proposed analysis steps using typical roughness data and these results are compared with experimental rolling noise data. This analysis tools show reasonable results and finally used for the prediction of the Korean high speed train rolling noise.

• 한국소음진동공학회논문집
• /
• 제24권8호
• /
• pp.606-612
• /
• 2014

Vehicle simulation models for noise and vibration prediction have been developed so far generally in two schemes. One is FE models generally used for problems below 200 Hz such as booming noise, and the other is SEA models for high frequencies of more than 1 kHz, representatively related to sound packages. There have been many researches to develop a simulation model for 200~1000 Hz, so-called mid-frequency region, and this paper shows one practical result that covers the trimmed body of a sedan vehicle. The simulation model is developed based on an FE model, and then FE elements at some areas are substituted with SEA elements to reduce DOFs. SEA panels are described by modal density, radiation efficiency, stiffness and damping characteristics that are found from some numerical assessments. Sound packages are modeled similarly as a conventional SEA model. The results obtained from the hybrid model were compared to experimental results. Predicted pressure and vibrational velocity generally show a good agreement. The developed simulation model and related technology are successfully being used in vehicle development process.

• 설비공학논문집
• /
• 제18권6호
• /
• pp.526-533
• /
• 2006

The prediction of heat-up time of an LCD glass plate in LCD glass pre-treatment process has been implemented in the present study. Firstly, the analytical solution for one-dimensional radiation heat transfer from IR heaters to a LCD glass plate is obtained. When the surface temperature of the IR heaters is set at 473 K, the heat-up time of LCD glass to averaged temperature of 383K is 28 seconds. In addition, a three dimensional full CFD analysis using STAR-CD is implemented in an effort to consider the effect of 3-D heat loss through the furnace walls. From the results of the 3-D CFB analysis, the heat-up time increases up to 32.5 seconds under the same conditions. When the IR heater temperature in creases up to 573 K, the heat-up time decreases to 12 seconds for the one-dimensional analytical solution and to 13.5 seconds for the 3-D CFD analysis, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.894-903
• /
• 2014

Insertion loss prediction of large acoustical enclosures using Statistical Energy Analysis (SEA) method is presented. The SEA model consists of three elements: sound field inside the enclosure, vibration energy of the enclosure panel, and sound field outside the enclosure. It is assumed that the space surrounding the enclosure is sufficiently large so that there is no energy flow from the outside to the wall panel or to air cavity inside the enclosure. The comparison of the predicted insertion loss to the measured data for typical large acoustical enclosures shows good agreements. It is found that if the critical frequency of the wall panel falls above the frequency region of interest, insertion loss is dominated by the sound transmission loss of the wall panel and averaged sound absorption coefficient inside the enclosure. However, if the critical frequency of the wall panel falls into the frequency region of interest, acoustic power from the sound radiation by the wall panel must be added to the acoustic power from transmission through the panel.

• 한국태양에너지학회 논문집
• /
• 제31권2호
• /
• pp.37-46
• /
• 2011

The GWNU (Gangnung-Wonju national university) solar radiation model was developed with radiative transfer theory by Iqbal and it is applied the NREL (National Research Energy Laboratory). Input data were collected and accomplished from the model prediction data from RDAPS (Regional Data Assimilated Prediction Model), satellite data and ground observations. And GWNU solar model calculates not only horizontal surface but also complicated terrain surface. Also, We collected the statistical data related on photovoltaic power generation of the Korean Peninsula and analyzed about photovoltaic power efficiency of the Gangwon region. Finally, the solar energy resource and photovoltaic generation possibility map established up with 4 km, 1 km and 180 m resolution on Gangwon region based on actual equipment from Shinan solar plant,statistical data for photovoltaic and complicated topographical effect.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.100-108
• /
• 2023

In this study, a neural network model inspired by a one-dimensional convolution U-net is developed to automatically accelerate edge localized mode (ELM) detection from big diagnostic data of fusion devices and increase the detection accuracy regardless of the hyperparameter setting. This model recognizes the input signal patterns and overcomes the problems of existing detection algorithms, such as the prominence algorithm and those of differential methods with high sensitivity for the threshold and signal intensity. To train the model, 10 sets of discharge radiation data from the KSTAR are used and sliced into 11091 inputs of length 12 ms, of which 20% are used for validation. According to the receiver operating characteristic curves, our model shows a positive prediction rate and a true prediction rate of approximately 90% each, which is comparable to the best detection performance afforded by other algorithms using their optimized hyperparameters. The accurate and automatic ELM-burst detection methodology used in our model can be beneficial for determining plasma properties, such as the ELM frequency from big data measured in multiple experiments using machines from the KSTAR device and ITER. Additionally, it is applicable to feature detection in the time-series data of other engineering fields.

• 대한수의학회지
• /
• 제41권4호
• /
• pp.571-578
• /
• 2001

방사선 피폭선량의 예측을 위한 방사선 민감 지표 모델 개발의 일환으로 apoptotic fragment assay법이 방사선에 피폭된 후 체내 피폭선량을 예측할 수 있는 지표로의 이용 가능성을 평가하기 위하여 코발트-60 감마선과 의료용 싸이크로트론 50MeV($p{\rightarrow}Be^+$) fast neutron 을 0.25Gy에서 1Gy의 선량을 마우스에 각각 전신 조사한 후 소장 음와세포내 apoptotic crypt cell의 수적 변화를 관찰하였다. 저선량 조사군에서 apoptotic crypt cell의 출현 빈도가 1Gy까지 급격하게 증가한 것으로 보아 방사선이 stem cell 지역에 있는 crypt cell의 형태학적 변화를 유발하는 것으로 나타났다. 이상의 결과는 아포토시스가 손상된 세포를 제거하므로 손상된 방사선 민감 표적 장기의 항상성 유지에 중요한 역할을 하는 것으로 판단되었다. Apoptotic fragments의 발생빈도에 대한 선량-반응 곡선에 있어서 음와세포는 중성자조사군이 $y=0.18+(9.728{\pm}0.887)D+(-4.727{\pm}1.033)D^2$ ($r^2=0.984$)으로, 반면에 감마선조사군은 $y=0.18+(5.125{\pm}0.601)D+(-2.652{\pm}0.7000)D^2$ ($r^2=0.970$)의 식을 얻었다. 이와 같이 중성자조사군과 감마선조사군은 공히 linear quadratic model 로 관찰되었다. apoptotic fragments 의 발생빈도와 조사 선량간에 유의한 효과가 있는 것으로 확인되었다. 이상의 결과에서 조사선량의 증가에 비례하여 방사선 민감 세포의apoptotic fragments 가 수적으로 증가하였으며, 고준위 방사선과 저준위 방사선은 선량 반응 관계식과 시간 경과에 따른 영향이 매우 유사하였으며, 마우스 음와세포의 apoptosis 유도에 대한 중성자선의 방사선 생물학적 효과비(RBE)는 2.072이였다. 그리고 모든 방사선조사군에서 방사선피폭 후 4시간과 6시간에 apoptosis 유도가 가장 많았으며, 음와세포의 형태학적 소견은 정상 대조군에서 관찰되지 않는 전형적인 apoptotic fragments 가 나타났다. 따라서 음와 세포에서의 아포토시스 유도는 방사선 피폭으로 발생된 세포 손상의 생물학적 영향 평가검색, 방사선 방호제의 민감도 검사, 방사성 동위원소의 체내 오염에 대한 체내 피폭선량 예측의 지표 및 방사선 민감 표적장기의 손상정도 파악에 이용 가능할 것임. Apoptotic fragment assay 법은 0.25Gy에서 1Gy 까지의 선량에서 간편하고 빠르며 재현성이 있는 지표로서 방사선 민감 표적 장기의 선량 반응 평가와 방사선 피폭후 조기 피폭선량 예측을 위한 방사선 생물학적 선량측정법의 좋은 지표로 사용할 수 있을 것으로 사료됨.

• Radiation Oncology Journal
• /
• 제38권2호
• /
• pp.99-108
• /
• 2020

Purpose: The probability of recurrence of cancer after adjuvant or definitive radiotherapy in patients with human papillomavirus-negative (HPV(-)) head and neck squamous cell carcinoma (HNSCC) varies for each patient. This study aimed to identify and validate radiation sensitivity signature (RSS) of patients with HPV(-) HNSCC to predict the recurrence of cancer after radiotherapy. Materials and Methods: Clonogenic survival assays were performed to assess radiosensitivity in 14 HNSCC cell lines. We identified genes closely correlated with radiosensitivity and validated them in The Cancer Genome Atlas (TCGA) cohort. The validated RSS were analyzed by ingenuity pathway analysis (IPA) to identify canonical pathways, upstream regulators, diseases and functions, and gene networks related to radiosensitive genes in HPV(-) HNSCC. Results: The survival fraction of 14 HNSCC cell lines after exposure to 2 Gy of radiation ranged from 48% to 72%. Six genes were positively correlated and 35 genes were negatively correlated with radioresistance, respectively. RSS was validated in the HPV(-) TCGA HNSCC cohort (n = 203), and recurrence-free survival (RFS) rate was found to be significantly lower in the radioresistant group than in the radiosensitive group (p = 0.035). Cell death and survival, cell-to-cell signaling, and cellular movement were significantly enriched in RSS, and RSSs were highly correlated with each other. Conclusion: We derived a HPV(-) HNSCC-specific RSS and validated it in an independent cohort. The outcome of adjuvant or definitive radiotherapy in HPV(-) patients with HNSCC can be predicted by analyzing their RSS, which might help in establishing a personalized therapeutic plan.