• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.218-223
• /
• 1997

The technique used is the active structural acoutrol (ASAC)approach which involves controlling the acoustic response of a panel-cavity covpled system by applying oscillating force inputs in the form of prezoelectric actuators directly to the flexible panel. The linear quadratic Gaussian control scheme is used for attenuating nosie inside the rectangular enclosure causing by flexible wall vibration. Results indicated the application of control inputs to the radiating wall resukted in considerable noise reductions inside the cavity. Auso,the possibility of application to the more complicated fluid-structure coupled system is verified.

• 전기전자학회논문지
• /
• 제5권1호
• /
• pp.16-23
• /
• 2001

수동적인 소음 감쇠는 산업현장에서 발생되는 소음을 감소시키기 위해서 주로 사용된 방법이다. 그리고 능동적인 소음 감쇠방법은 수동적인 소음 감쇠방법에 비해 많은 이점을 가지고 있다. 능동적인 소음 감쇠 시스템은 낮은 대역의 주파수 영역에서 소음 감쇠 성능이 우수하며, 소형 경량으로 설계할 수 있는 이점이 있다. 본 논문에서는 능동적인 소음감쇠를 위한 간단한 궤환 루프 제어 시스템을 제안한다. 능동적인 궤환 제어 시스템은 위상 지연 보상과 반전 회로와 외부 소음을 수음할 수 있는 마이크로폰과 외부 소음을 줄이기 위해 위상이 반전된 소음을 발생시키는 스피커로 구성되어 있다. 그리고 소음감쇠 성능을 향상시키기 위해서 위상천이기를 사용하여 진폭 응답 곡선에서 최대가 되는 주파수에서 위상차가 $180^{\circ}$가 되도록 위상을 보정하여 소음을 제거했다. 능동소음제어에서 위상 지연이 $50^{\circ}$ 와 $310^{\circ}$ 사이에 존재하는 소음이 감소되는 경향이 있었으며, 소음은 헬멧 내에서 약 20[dB] 감쇠되는 결과를 얻었다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 춘계학술대회
• /
• pp.179-182
• /
• 1995

Although air, water, and noise pollutions have been widely recognized, electromagnetic forces(EMF) hazard has been rarely recognized as a pollution and very little studies has been done in this country. Thus, in this study electromagnetic forces radiated by various home appliances, once machines, and communication equipments were measured and so were several places radiating strong EMF such as subway stations and electric substations. Among the home appliances microwave oven senates lots of magnetic field and microwaves, and electric mattress does strong magnetic field. In video game room strong magnetic and considerable electric fields were measured. It was observed strong magnetic field inside of electric powered train and very strong magnetic and electric fields on some platforms. Hand-phone and car-phone radiate very hazardous level of microwaves to brain and that they rapidly come into wide use. In this study data base for various electric machines and places radiating strong EMFs were constructed and could be used for future epidemiological studies.

• 한국음향학회지
• /
• 제20권7호
• /
• pp.13-20
• /
• 2001

소음제어기술은 산업현장에서 발생되는 소음을 감소시키기 위해 사용된 고전적인 방법이다. 능동적인 소음 감쇠기는 수동적인 소음 감쇠기에 비해 많은 이점을 가지고 있으며, 특히 능동적인 소음 감쇠시스템은 낮은 대역의 주파수 영역에서 소음감쇠 성능이 우수하고, 소형, 경량으로 설계할 수 있는 이점이 있다. 본 논문에서는 수동적인 소음감쇠기로 헬멧을 사용하여 외부 소음을 감소시킨 후 헬멧 내에서의 소음을 제어할 수 있는 능동 소음 감쇠시스템을 제안한다. 제안된 능동적인 소음 감쇠시스템은 위상 지연 보상과 반전 회로와 외부 소음을 감지할 수 있는 마이크로폰과 외부 소음을 줄이기 위해 반전된 위상을 발생하는 스피커로 구성되어 있다. 그리고 소음감쇠 성능을 향상시키기 위해서 위상천이기를 사용하여 진폭응답곡선에서 최대가 되는 주파수에서 위상차가 180°가 되도록 위상을 보정하여 소음을 저감했다 본 논문에서 개발된 시스템은 위상 지연이 50°와 310°사이에 존재하는 소음이 감소되었다. 이 시스템으로 인한 소음 감쇠는 약 20 dB의 감쇠 결과를 얻었다.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.770-775
• /
• 2010

As considerable interests in noise emission from the ships have been increased, control of the propeller cavitation generating vibration and radiating noise is looming large. In general, the tip vortex cavitation is first produced in case of full scale propellers, and noise levels rise dramatically from that moment. In order to reduce induced noise from the tip vortex cavitation and hence increase the cavity inception speed, we propose the mass injection method. Water injected from the propeller tip decreases rotating speed of the tip flow, and it restrains growing the tip vortex cavity. Experimental investigations of the model tests carried out in a large cavitation tunnel show that the tip vortex cavitation is effectively controled by water injection from the propeller tip.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.110-113
• /
• 2005

Theoretical models to study the vibro-acoustic performance of a sandwich panel are proposed. The wave propagation characteristics are analyzed, and dispersion relation is derived. The vibration Is analyzed using the Mindlin plate theory. The vibration of the compliantly supported Mindlin plate is investigated using the Rayleigh-Ritz method. The Timoshenko beam functions are used as trial functions. The model is applied to numerically investigate the influence of the plate mechanical properties. The vibro-acoustic properties are mostly determined by bending deformation at low frequencies. At higher frequencies, the shear deformation has a strong influence. The proposed numerical model is used to estimate the optimal panel properties that result in minimum sound radiation. With increasing dynamic stiffnesses the vibration response decreases but the radiating wavenumber components increase.

• 한국소음진동공학회논문집
• /
• 제15권4호
• /
• pp.412-420
• /
• 2005

This article proposes analytical solutions for sound radiation from radial vibration modes of a thick annular disk. Structural eigensolutions are calculated using the transfer matrix method. The far-field sound pressure distribution is obtained using two alternate methods. In the first method, pressure is calculated using the Rayleigh integral technique. The second method treats sound radiating radial surfaces as cylindrical radiators of finite length. The Sinc function approach is employed for calculations. Acoustic powers and radiation efficiencies of radial modes are also determined from the far-field sound pressure calculations. Analytical predictions match well with measured data as well as computational results from a finite element code in terms of structural eigensolutions and from a boundary element code in terms of sound pressure, directivity etc.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1078-1082
• /
• 2001

An alternative formulation of the Helmholtz integral equation is derived to express the pressure field explicitly in terms of the velocity vector of a radiating surface. This formulation, derived for arbitrary sources, is similar in form to the Rayleigh's formula for planar sources. Because the pressure field is expressed explicitly as a surface integral of the particle velocity, which can be implemented numerically using standard Gaussian quadratures, there is no need to use Boundary element method to solve a set of simultaneous equations for the surface pressure at the discretized nodes. Furthermore the non-uniqueness problem inherent in methods based on Helmholtz integral equation is avoided. Validation of this formulation is demonstrated for some simple geometries.

• 한국음향학회지
• /
• 제33권6호
• /
• pp.351-357
• /
• 2014

본 논문에서는 복합형 수직축 풍력발전기의 유동소음특성에 관한 연구를 수행하였다. 복합형 수직축 풍력발전기는 Savonius형과 Darrieus형을 동시에 사용하여 두 풍력발전기의 장점을 극대화하여 단점을 상쇄시키는 새로운 개념의 수직축 풍력발전기이다. 본 연구에서는 이러한 특성을 갖는 복합형 수직축 풍력발전기에 대하여, 복합 전산공력음향학 기법을 이용하여 풍력발전기에서 발생하는 유동소음을 예측하였다. 먼저, 전산유체역학 기법을 이용하여 터빈 주위의 비정상유동장을 예측하였다. 다음으로, 예측한 비정상유동장에 음향상사법을 적용하여 터빈으로부터 방사하는 유동소음을 예측하였다. 해석결과를 바탕으로 복합형 수직축 풍력발전기의 유동소음특성을 분석하였고, 이를 Savonius형 및 Darrieus형의 유동소음특성과 비교하였다.

• Advances in aircraft and spacecraft science
• /
• 제7권5호
• /
• pp.425-440
• /
• 2020

The work presented herein is a numerical investigation of the flow field inside a resonant igniter, with the aim of predicting the performances in terms of cavity temperature and noise spectrum. A resonance ignition system represens an attractive solution for the ignition of liquid rocket engines in space missions which require multiple engine re-ignitions, like for example debris removal. Furthermore, the current trend in avoiding toxic propellants leads to the adoption of green propellant which does not show hypergolic properties and so the presence of a reliable ignition system becomes fundamental. Resonant igniters are attractive for in-space thrusters due to the low weight and the absence of an electric power source. However, their performances are strongly influenced by several geometrical and environmental parameters. This motivates the study proposed in this work in which the flow field inside a resonant igniter is numerically investigated. The unsteady compressible Reynolds Averaged Navier-Stokes equations are solved by means of a finite volume scheme and the effects of several wall boundary conditions are investigated (adiabatic, isothermal, radiating). The results are compared with some available experimental data in terms of cavity temperature and noise spectrum.