• 한국소음진동공학회논문집
• /
• 제20권10호
• /
• pp.968-975
• /
• 2010

The high interest for the ground vibrations which is caused by the train service is risen. When the trains are passed, a serious force is applied to ground and the caused vibration is propagated to the area of the building by the ground and rocks. This vibration comes to feel in the residents with the direct vibration, it is radiated in sound. The caused vibration and radiated sound affect the human's life, and this vibration brings about the operation interruption of the equipment which is sensitive to the vibration, or will bring about the structural damage of the building. In this study, the effect of the vibrations caused by the passing trains on the railway station and buildings is investigated by vibration measurement. Indoor and outdoor measurement is carried out by each trains.

• 한국시뮬레이션학회논문지
• /
• 제14권4호
• /
• pp.69-76
• /
• 2005

To investigate the characteristics of the sound-pipe on the top of King Song-Dok bell, using computer simulation, the throat impedance was evaluated for the straight pipe and conical pipes with varying taper angles. When sound propagates in a rigid walled, unflanged circular pipe with wavelength larger than radius, the acoustic motion is planar, much as in a bar. The incident sound waves are reflected at the end of pipe and some of them are transmitted. The reflection coefficient and radiation impedance of the sound-pipe of King Song-Dok bell were calculated, and the results demonstrated that the high frequency sound is radiated through the sound-pipe. It behaves like a frequency filter.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.134-137
• /
• 2014

The noise reduction performance of a passive facility is dependent on the its length or volume. In other words, this means that the larger the size of passive facility is, the better the noise reduction performance is. The sound directivity control has been proposed as an alternative for the noise reduction without a passive facility. The purpose of this study is to investigate the correlation between the flange attached to inclined exit of the tube and sound directivity when the sound radiates from the tube to the outside. As a result, the sound radiated from flanged tube had weak sound directivity in the wide angle. Also as the flange was bigger, the sound pressure level was lower in the behind the flange.

• 한국음향학회지
• /
• 제14권4호
• /
• pp.12-20
• /
• 1995

본 논문은 충격 음향법에 의한 원통형 물체의 결함 검출 방법에 관한 원리와 실험 결과를 기술한다. 원통형 물체가 가지게 되는 공진 주파수는 물체의 직경, 길이 등의 물리적 크기에 따라 결정되며 이러한 원통형 물체를 자유 공진 시킬 경우 구조물 고유에 주파수 및 고조파 성분이 내포된 음향을 방생시킨다. 결함이 존재하는 물체에 충격ㄷ이 가해질 경우 발생하는 음향은 정상의 경우와 구별되며, 주파수 성분 분석을 통해 보다 명확한 식별이 가능하다. 본 연구에서 적용된 음향 충격법에 의한 결함 검출 기법은 연구 대상 물체의 경우 결함 유무를 완벽하게 판정할 수 있었으며, 차후 유사한 형태의 구조물에 대한 결함 검출에도 응용될 수 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.1101-1106
• /
• 2004

This study presents the reconstruction of sound field radiated from an automotive engine using equivalent sources. Basic concept of the method presented is to replace the engine noise source with elementary sources of multipoles, e.g., monopoles and dipoles. The so-called Helmholtz equation least-squares (HELS) method can reconstruct the sound radiation fields from spherical geometries in a series expansion of spherical Hankel functions and spherical harmonics. In this paper, multi-Point, multipole equivalent sources are employed to reconstruct the sound field radiated from an automotive engine with a fixed rotation speed. To ensure and improve the accuracy of reconstruction, the spatial filters of multipole coefficients and wave-vectors are adopted for suppressing the adverse effect of high-order multipoles. Optimal filter shapes are designed with regularization parameters minimizing the generalized cross validation (GCV) function between actual and reproduced model. After regeneration of field pressures using the proposed method as many as necessary, the vibro-acoustic field of an engine could be reconstructed by using the BEM-based near-field acoustic holography (NAH) technique in a cost-effective manner.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권1호
• /
• pp.73-80
• /
• 2006

In order to compute the radiated sound from a vibrating structure, the Rayleigh's integral equation has to be derived from the Helmholtz equation using Green's function. Generally, the surface velocity in the Rayleigh's integral equation uses the root mean square(rms) velocity. The calculation value is too large, because it's not considered cancelation. On the other hand. using the complex velocity, the sound pressure is calculated too small, because it considers that sound is perfectly canceled out. Therefore, this thesis proposes a correction factor(CF) which considers vibration modes and the method by which to calculate the radiating sound pressure. The theoretical results are compared with the experimental values, and the proposed method can be verified with confluence.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.22-32
• /
• 1998

Many of steel structures having little internal damping consist of stiffened plates. In case that viscoelastic materials are adhered to the stiffened plates for the reduction of structure-borne noise, their effects are varied by the adhered position and dynamic characteristics of the structures as well as their material properties and adhered amount. In this paper, sound reduction effects of viscoelastic materials partially adhered to the different positions of a stiffened steel plate have been investigated by the measurement of vibratory velocity and sound intensity. The results show that optimal adherent positions of viscoelastic materials to reduce sound radiation power are the loop areas of modes.

• 한국음향학회지
• /
• 제2권1호
• /
• pp.11-19
• /
• 1983

An irregulary formed chamber was designed and constructed to recognize the direct sound radiated from the sound source and the reflected sound from the walls of the chamber. The sound signal used was tone burst in the frequency response characteristics with the signal detection after transient effect. The direct wave, transient phenomena and the primary reflected sound could be asiily distinguished each other by measurements of the arrival time of the time difference. And also noise could be easily distinguished by the same method. The result obtained can be used in industries for automatic measurement of the sound pressure reponse characteristics with respect to frequencies.

• 한국음향학회지
• /
• 제13권2호
• /
• pp.13-22
• /
• 1994

회전하는 타이어의 표면진동에 의한 소음방사의 이론적인 모델에 대하여 연구하였다. 타이어를 원형링으로 가정하였고 정규주파수와 구조적인 손실계수를 고려하였다. 타이어 전표면에 대한 음압의 수치적분을 통하여, 타이어로부터 방사되는 음향파워를 계산하였다. 가진주파수와 손실계수를 고려한 계산 결과로부터 타이어 트레드 진동에 의한 음향방사를 감소시키기 위한 조건을 구하고자 하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 1999년도 유체기계 연구개발 발표회 논문집
• /
• pp.189-199
• /
• 1999

The revision was proposed for methods A-weighted sound pressure measurement for fans, blowers and compressors in order to apply newly developed measurement techniques to KS B 6361 established in 1987. This proposal includes modification of terminologies, revision of sound power methods for radiated sound from the body, inclusion of In-duct measurement method, and correction method for flow noise upon microphon.