• The Korea Journal of Herbology
• /
• v.21 no.2
• /
• pp.175-180
• /
• 2006

Objectives : The difference of delayed luminescence-biophoton emission was investigated in Cervi Pantotrichum Cornu selected randomly. Cervi Pantotrichum Cornu was used as a tonic in Korean medicine. Methods : Randomly selected samples of Cervi Pantotrichum Cornu were radiated with 150 W metal halide lamp for 1 minute. After radiation, biophoton emissions of each sample were detected by electron multiplication(EM)-charge coupled device camera. The detected biophoton image was calculated with unit of counts per pixel. Results : The average biophoton emissions of delayed luminescence with EM ratio of ${\times}l50\;and\;{\times}250$ were distinguished significantly. The maximum biophoton emissions of delayed luminescence with EM ratio of ${\times}250$ were distinguished significantly. Conclusion : These results suggest that biophoton imaging of Cervi Pantotrichum Cornu could become the meaningful method for the study of differentiation and classification of Cervi Pantotrichum Cornu.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.304-310
• /
• 2011

The application of time-domain methods in emission measurement instruments allows for a reduction in scan time by several orders of magnitude and for new evaluation methods to be realized such as the real-time spectrogram to characterize transient emissions. In this paper two novel systems for time-domain EMI measurements above 1 GHz are presented. The first system combines ultra-fast analog-to-digital-conversion and real-time digital signal processing on a field-programmable-gate-array (FPGA) with ultra-broadband multi-stage down-conversion to enable measurements in the range from 10 Hz to 26 GHz with high sensitivity and full-compliance with the requirements of CISPR 16-1-1. The required IF bandwidths were added to allow for measurements according to MIL-461F and DO-160F. The second system realizes a system of time-interleaved analog-to-digital converters (ADCs) and has an upper bandwidth limit of 4 GHz. With the implementation of an automatic mismatch calibration, the system fulfills CISPR 16-1-1 dynamic range requirements. Measurements of the radiated emissions of electronic consumer devices and household appliances like the non-stationary emissions of a microwave oven are presented. A measurement of a personal computer's conducted emissions on a power supply line according to DO-160F is given.

• ETRI Journal
• /
• v.24 no.6
• /
• pp.429-434
• /
• 2002

This paper investigates the effect of a corrugated aperture on a common-mode current traveling along a penetrating wire. Computational results illustrate that the corrugated aperture acts as a filter, significantly reducing the common-mode current on the wire. This effect causes a reduction of radiated emission from cables passing through apertures on shielding enclosures. To predict and analyze the characteristics of the common-mode current on a straight wire passing through a corrugated aperture with cylindrical symmetry, the finite-difference time-domain (FDTD) method is applied.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1583_1584
• /
• 2009

Reverberation chamber have become a common tool in radiated susceptibility and emission testing of electronic equipment. In a reverberation chamber, internal electromagnetic fields are mixed by metallic stirrer. Due to elimination of Polarization characteristic in reverberation chamber, electromagnetic wave reached to EUT all aspect angle. Hence, Field distribution in overmode reverberation chamber can be presented by chi-square distribution. Field uniformity in reverberation chamber have to satisfy standard deviation below 3dB and is influenced by mechanical stirrer. This paper investigates relationship between change of stirrer parameter and field uniformity in reverberation chamber.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.6
• /
• pp.23-31
• /
• 1995

As a study on electromagnetic radiation emission from the neon signs, this paper has investigated the characteristics of frequency bands and spectra intensities under the operations of the sign's OFF, ON/OFF and continuous ON states. Also we have studied the above characteristics when a distance between the sign and the antenna is varied. All data were obtained in the range of 0.1∼1,000[MHz] by using spectrum analyzer along with the loop, biconical and log periodic antenna. As the result, we found that the radiated electromagnetic waves of the sign at continuous ON states were measured only in the range of 30∼400[MHz] but those of the sign at ON/OFF states were appeared widely in the range of 2∼1,000[MHz].

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.76-81
• /
• 2012

In-process evaluation equipment for the prominent discrete tone (PDT) emitted by small motors or actuators such as HDD(Hard Disk Driver), ODD(Optical Disk Driver) or linear motors has been developed and estimated on the basis of Prominence Ratio (PR) method in ECMA 74. Correlation of the evaluation equipment was performed in comparison with the method by ECMA 74 in anechoic chamber. Coherent function between two systems was applied in order to compensate traceability of ECMA 74 in anechoic chamber. Usability of the developed system with estimated Gage R&R shall be approved with real samples in the mass production line.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.3
• /
• pp.248-251
• /
• 2014

As more vehicles become equipped with advanced electronic control systems, more consideration is needed with regards to automotive safety issues related to the effects of electromagnetic waves. Unwanted electromagnetic waves from the antenna, electricity and other electronic devices cause the performance and safety problem of automotive components. In general, Power Integrity and Signal Integrity analysis have been widely used, but these analyses have stayed PCB level. PCB base analysis is different from radiated emission TEST condition so its results are used just for reference. This paper proposes EMC optimization technology using module level 3-dimensional radiation simulation process closed to fundamental test conditions. If module level EMC analysis, which is proposed in this study, is applied to all automotive electronics systems, unexpected EMC noise will be prevented.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1442-1443
• /
• 2008

본 논문에서는 인쇄회로기판과 도전체 샤시(Chassis)가 연결되었을 때의 복사성 방사(Radiated Emission)의 감소에 대해서 연구하였다. Current Driven 메커니즘 등가회로를 사용하여 전자파 방사의 주요한 원인중 하나인 Common-mode Current를 인쇄회로기판과 Chassis가 연결된 구조에 적용하였다. Chassis의 유무에 따라 복사성 방사의 감소를 확인하고자 2-layer 인쇄회로기판과 SECC(Steel Electro galvanized Cold-rolled Coil) 재질의 Chassis를 나사(Screw)를 통하여 전기적으로 연결하였을 때를 시뮬레이션 하였고, 제작된 구조물을 3m 무반향실에서 복사성 방사를 측정한 후 시뮬레이션과 결과를 비교하였다. 결과로 30MHz$\sim$45MHz에서 최대 10dB 감소의 효과가 있음을 확인하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.339-342
• /
• 2008

본 논문에서는 이중 구조의 공동에서 작은 공동 전원단 내부에 존재하는 전자파원으로부터 방사되는 전자파를 내부 전원단의 개구를 지나 외부 공동의 개구를 통해 방사될 때, 내부 전원단의 위치와 외부 공동의 개구 위치 변화에 따른 방사 전자파의 크기를 FDTD법으로 검토하고 있다. 외부 공동 개구의 크기는 최대 방사 전자파의 주파수를 결정하며 내부 전원단의 위치를 조절하면 방사되는 전자파의 크기를 제어할 수 있음을 이론해석으로 통하여 확인하고 있다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.9
• /
• pp.634-640
• /
• 1999

Resonance radiation trapping has a great influence on the characteristics of vacuum ultraviolet(VUV) photon emissions in AC PDP cell. We calculate the spatial andspectral distributions of VUV photons, which are radiated by excited Xe in AC PDP cell by Monte Carlo method. Especially a dip in the spectrum at center frequency is discovered both in simulation and in experiment. We give a physical explanation of this phenomenon by the concept of frequency-dependent mean free path of VUV photons.