• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.599-607
• /
• 2006

The ship radiated noise appear the various characteristic signals due to the mechanic system in the ship, the propeller and the interaction between ship body and sea water. Generally, it is classified two main components: the speed dependent signal and the speed independent signal. It is required that very complex procedure to classify the signal origin from the ship-radiated noise. This paper presents techniques to automatically detect and classify the tonal signals ken the ship-radiated noise, using the Q factor and the neural network.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.5
• /
• pp.635-642
• /
• 1998

In automobile exhaust system. Internal pressure pulsation and shell vibration greatly affect the surface sound radiation. This noise is emitted from the muffler outer shell due to the pulsation of the exhaust gas pressure. This paper describes an analytical study of these characteristics as influenced by exhaust system structure. An exhaust simulator was used for generating the pressure pulsation. The relationship between shell vibration and radiated noise was used for generating the pressure pulsation. The relationship between shell vibration and radiated noise was identified by finding FRF.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.377-383
• /
• 2011

This paper reports the filtered velocity feedback (FVF) controller to reduce the acoustic power from clamped beams. The instability problem due to the non-collocated sensor/actuator configuration when using PZT actuator should be resolved. The roll-off property of the FVF controller at high frequency helps to alleviate the instability. The dynamics of clamped beams under forces and moments pair and the FVF controller are first formulated. The formulation of the sound radiated power is followed. The open loop transfer function (OLTF) synthesized with 100 modes is used to determine the stability of the control system. The control performance is finally estimated. The levels of the vibration and the sound radiated power are reduced in the wide band below the tuning mode of the FVF controller.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.5
• /
• pp.317-322
• /
• 2002

A solution procedure of vibration and radiated noise of the plate covered with damping material has been studied. To predict the vibration level and the radiated noise level of the plate covered with damping material, FEM and BEM have been utilized, respectively. A property of damping material has been measured by using a composite beam. Two different kinds of measuring procedure for the composite beam have been introduced by comparing its characteristics. The numerical prediction of vibration level of the Plate covered with damping material has been proved with experimental data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.240-242
• /
• 2014

This paper presents the system which can be predicted 3-D underwater radiated noise pattern using submarine hull velocity and can be analyzed the counter detected performance for threats in real time. To verify the developed system the tests were done in a water tank for structure like a submarine. The far field radiated noise pattern predicted using the developed system is compared with the result calculated using the near field measurement system, these results have shown good agreement.

• Journal of Biomedical Engineering Research
• /
• v.24 no.5
• /
• pp.453-458
• /
• 2003

When the piezoelectric extracorporeal shock wave lithotripter is operated. sounds are generated. In this paper, we present a fact that the sounds are radiated undoubtedly from the object to be hit by the shock waves. For this results. we use the method to identify the sound source location of the radiated sounds by estimating the distance and the bearing from the sound source using one hydrophone. In addition. we investigate the relation between the radiated sounds and the vibrations of the objects using bronze models of disc type with clear vibrating characteristics and present the results of experiments to be analyzed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.738-743
• /
• 2013

Underwater radiated noise is the key in acoustic stealth performance of modern naval ships. The underwater radiated noise predicted by the hull vibration with radiation efficiency cannot give the information of radiation pattern which is essential to the analysis of detection possibility by enemy and to improve the operational performance of the naval ship. The radiation pattern of underwater radiated noise is able to be obtained with radiation efficiency and radiation direction coefficient. In this paper, a new method to extraction the radiation efficiency and radiation direction coefficient is suggested and proved with the simulation and experiment by using cylindrical shell of 70cm diameter in air.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.680-690
• /
• 2020

In ocean environment, the sound speed gradient of seawater has an important influence on far field sound propagation. The FEM/BEM is used to decouple the vibroacoustic radiation of the spherical shell, and the Green function of the virtual source chain is adopted for decoupling. For far field radiated Sound Pressure Level (SPL), the Beam Displacement Ray normal Mode (BDRM) is employed. The vibration and near-/far-field radiated SPL of spherical shell is analyzed in shallow sea uniform layer, negative/positive gradient, negative thermocline environment, and deep-sea sound channel. Results show that the vibroacoustic radiation of spherical shell acted at 300Hz can be analogous to dipole. When the radiated field of the spherical shell is dominated by large-grazing-angle waves, it can be analogous to vertically distributed dipole, and the far field radiated SPL is lower; while similar to horizontally distributed dipole if dominated by small-grazing-angle waves, and the far field SPL is high.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.6
• /
• pp.527-536
• /
• 2013

In order to predict structural vibration and radiated noise of high-voltage transformer in operation, it is necessary to precisely find the excitation force generated by the coils and core. However, finding the excitation force through experiments of high voltage transformer in operation is not possible. Therefore, this paper deals with identifying the excitation force by using the acceleration data measured through experiments and the transfer function estimated through finite element model. A method to predict structural vibration and radiated noise was also proposed. Three-phase windings and the core are the source of high-voltage transformer. The excitation forces were identified using the acceleration data and the transfer function of the surface of the tank. Structural vibration and radiated noise from the surface of the tank was predicted by using the identified excitation force. As a result of the interpretation of the experimental and computational analysis of structural vibration from the surface of the tank and radiated noise from the field point, the interpretation of the computational analysis showed relatively good accordance with the experiment.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.349-355
• /
• 2003

Material degradation due to corrosion fatigue was evaluated nondestructively using backward radiated Rayleigh surface wave. h corrosion fatigue test was carried out for the specimens made of thermo-mechanically controlled process steel in 3.5wt.% NaCl solution at $25^{\circ}C$. The backward radiation profile, which is the amplitude variation of backward radiated ultrasound according to the incident angle, of the specimens were measured in water at room temperature after the corrosion fatigue test. The velocity of Rayleigh surface wave, determined from the incident angle at which the profile of the backward radiated ultrasound became maximum, decreased for the specimen that had the large number of cycles to failure in the corrosion fatigue test. This fact implies that the corrosion degradation occurred at specimen surface in this specific test is dominantly dependant on the me exposed to corrosion environment. The result observed in the present work demonstrates the high potential of backward radiated Rayleigh surface wave as a tool for nondestructive evaluation of corrosion degradation of aged materials.