• 한국소음진동공학회논문집
• /
• 제18권1호
• /
• pp.26-34
• /
• 2008

This paper summarizes a design procedure of radiated noise from engine blocks of marine engines. This air-borne noise is one of the significant noise contributors including the aeroacoustic noise due to intake and exhaust and the re-radiation due to structure-borne noise. Excitation forces by engine operations are evaluated taking into account the power generation mechanism from the burning process to the subsequence motion of internal parts; piston, connecting rod, and crank shaft. The acoustic transfer vector method is incorporated to effectively simulate the radiated noise field under the various operation conditions. A contribution analysis for the various excitations to the radiated noise is conducted. It is found that the firing pressure is the main source of the radiated noise, and so the structure of the cylinder can be modified to significantly reduce the radiated noise from the engine block.

• 한국소음진동공학회논문집
• /
• 제21권12호
• /
• pp.1104-1111
• /
• 2011

This paper investigates the filtered velocity feedback(FVF) controller for the reduction of the acoustic power radiated from a clamped beam. The instability problem due to the non-collocated sensor/actuator configuration when using PZT actuator should be sorted out. The roll-off property of the FVF controller at high frequency helps to alleviate the instability. The dynamics of clamped beams under forces and moments pair and the FVF controller are first formulated. The formulation of the sound radiated power is followed. The open loop transfer function(OLTF) synthesized with 100 modes is used to determine the stability of the control system. The control performance is finally estimated. The levels of the vibration and the sound radiated power are reduced in the wide bandbelow the tuning mode of the FVF controller.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.439-445
• /
• 2008

In this paper, the preliminary EMC analysis process between the Communication, Ocean and Meteorological Satellite (COMS) and Geostationary Earth Orbit (GEO) launch vehicles in the frequency range [1MHz-47MHz] is described. The considered launch vehicles are arian V, sea Launch, land Launch, atlas III&V, delta IV, proton M/breeze M, soyuz, HII-A and Angara. The launch vehicle Radiated Emission (RE) specifications have been compared to COMS satellite Radiated Susceptibility (RS) limits. The COMS RS limits are the RS qualification levels of COMS units during launch. As a result, The radiated emission levels of arian V, sea launch, atlas III&V, delta IV, proton M/breeze M, HII-A and angara are compliant with COMS RS limits. The negative margins appear between land launch or soyuz launch vehicle RE and COMS RS. Then, if the land launch or soyuz is chosen by the customer, The tests should be performed at satellite level in order to demonstrate the compatibility with respect to launch vehicles specifications.

• 한국전자파학회논문지
• /
• 제17권2호
• /
• pp.148-151
• /
• 2006

PCB에서의 전자파 간섭원으로 DC power-bus의 공진이 자주 지목된다. 이것은 결국, 전도성 또는 전파 방사의 형태로, 하나 또는 인접한 시스템에서 디지털 SI를 저하시키게 된다. 따라서 PCB의 방사 문제를 파악하는 것은 중요하므로, 본 논문은 DC power-bus 공진 모드에 대한 방사를 면밀히 살펴본다. 엄밀한 주파수 영역 해석법을 이용하여 임피던스와 방사 전계를 구하고, 이는 물리와 전자파 해석 모의시험에 의해 타당성이 검토된다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.149-152
• /
• 2005

The DC power-bus' resonance is frequently attributed to EMI sources in the PCBs. Subsequently, it will ruin the digital signal integrity within one system or between adjacent systems in the form of conducted or radiated emission. Hence, since it is of importance to examine the PCB's emission, this paper sheds a light on the radiated emission from the power-bus with regards to its resonance modes. A full-wave analysis method is used to calculate the impedance and radiated electric fields and is validated by physics and an EM analysis tool.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1652-1653
• /
• 2011

This paper builds a printed circuit board to calculate the radiated emissions due to the common-mode and differential-mode currents. The calculated results agree with the measured values. Based on the calculated values, it is shown clearly that the common-mode radiations are the dominator of the radiated emissions from the device. The radiated emissions due to the common-mode currents can easily dominate the radiated emissions from the printed circuit board.

• 한국소음진동공학회논문집
• /
• 제15권6호
• /
• pp.738-748
• /
• 2005

The ship radiated noise level fluctuates by the difference of interference and reverberation according to measurement methods and environmental conditions. These phenomena cause error of the source level estimation even in the same environment conditions. This paper describes a quantitative analysis and a reduction method for an error value to the source level estimation in spatial and temporal interference environment. The design criteria of the radiated noise measurement array composed of omni-directional hydrophones and the source level accuracy in the deep water range are given. The source level accuracy in the shallow water range is also derived based on the statistical model of the multiple reflection paths. The results are verified using the water tank experiment and the sea trial.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권3호
• /
• pp.123-129
• /
• 2003

In this paper, a relationship between AC discharge progress and the radiated electromagnetic waves was investigated by measuring electromagnetic waves using a biconical antenna and a spectrum analyzer. The frequency spectrum of the radiated electromagnetic waves were measured at the atmospheric pressure in liquid nitrogen($LN_2$) during partial discharges progressed by AC high voltage in nonuniform electric field. Front the results of this study, a new method was introduced for measurement and analysis of the radiated electromagnetic waves with discharge progress in $LN_2$ Besides. according to the consideration of the mutual relation between frequency spectrum of the radiated electromagnetic waves and discharge progress, it was confirmed that detecting partial discharge and estimating discharge progress could be possible. It is considered that these results obtained from this investigation may be used as fundamental data for diagnosis and prediction of electric insulations about superconducting and cryogenic power equipments.

• 한국소음진동공학회논문집
• /
• 제23권5호
• /
• pp.394-400
• /
• 2013

Underwater radiated noise is one of the important performances related to stealth of the naval vessel. However, the evaluation can't be performed frequently due to the cost. Therefore, the estimation method of the underwater radiated noise with average hull vibration is suggested in this paper assuming that the hull of the ship is infinite plate which consists of various unit plates. Through the experiment, the estimated noise is verified from the comparison to the measured data. In addition the difference of underwater radiated noise according to the operating equipments is estimated with measured vibration velocity.

• 대한조선학회논문집
• /
• 제47권6호
• /
• pp.803-807
• /
• 2010

The transfer function method is a widely used in the analysis of underwater radiated noise of ships because it is simple to implement and gives a simple way in the design stage requiring trade-off studies on various kinds of noise sources. In this study, a framework is implemented based on the transfer function method. The framework is interfaced to a software providing transfer functions of hull force to underwater radiated noise. The transfer function-based underwater radiated noise analysis approach is reviewed and the implemented framework structure is described. As an example, a numerical calculation of a virtual ship is carried out and its results are investigated in terms of applicability to real ship design project.