• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.14-20
• /
• 2008

As the number of buildings that use the transparent permeation materials as the outer wall is on the increase, the coming amount of the light rays is a lot, and thus the increase in the cooling load and the radiant heat of high temperature may cause the residents to discomfort. In order to reduce such influences, this paper analyzed the installation effects of the sunshade BIPV. The inner temperature of the room installed the sunshade BIPV or otherwise was measured, and compared and analyzed the effects of reducing the cooling load by the incoming light rays. The sample space of the third floor of S university installed the sunshade BIPV has two rooms on the same conditions, and for five sunny days selected in August, the researcher measured the air temperature and the temperature of the fittings with closing the windows to minimize the movement of air without operating the coolers. The maximum cooling load measured by the incoming light rays in the room where the sunshade BIPV was not installed was examined as 459.13kcal/h. It can be understood as the effect of reducing the cooling load according to the incoming rays of the room with sunshade BIPV. Even though the effect of cooling load reduction is not so great in a room, the total reduction in cooling room for the 32 rooms installed the sunshade BIPV was estimated to be 40442.27kcal/day, which will be able to bring the maximum reduction effect of 17.1kW in energy and reduce the investment cost owing to the reduction in cooling load when initially designing the building.

• 한국도로학회논문집
• /
• 제13권4호
• /
• pp.159-166
• /
• 2011

국제 사회는 산업경제의 발달과 더불어 온실가스 배출량이 날로 증가하고 있으며, 이로 인한 기후 변화 피해가 날로 심각해지고 있는 상황에서 온실가스 배출량을 줄이기 위해 전세계가 노력을 하고 있다. 정부는 온실가스 배출량을 감축하여 지구온난화를 막기 위해 "저탄소 녹색성장"의 국가정책 하에서 신재생에너지와 같은 친환경적인 녹색산업에 많은 관심과 투자에 집중하고 있다. 신재생에너지 분야는 태양력, 풍력, 수력, 조력 등 자연에너지를 활용하는 기술에 투자하면서 관련 핵심 부품 및 소재기술은 기술적으로 발전하고 있다. 반면에, 도로 공간에 존재하는 다양한 미활용 에너지를 이용하는 기술에 대한 연구는 세계적으로도 미흡한 실정인데, 본 논문에서는 이러한 도로 공간에서의 미활용 에너지를 통해 전기를 수확하는 기술에 대한 기초적인 실험방법과 결과를 제시하였다. 도로 공간에서의 미활용 에너지는 다양한 자원이 있을 수 있는데, 예를 들면 도로 주행 차량의 압력 및 충격 에너지, 도로 포장면의 복사열, 도로 소음 및 파동 등이다. 본 논문은 도로를 주행하는 차량으로부터 전기를 수확하기 위한 압전체 형상을 제안하였으며, 이를 검증하는 몇 가지의 기초 실험을 실시하였다. 즉, 압력을 전기로 변환하는 압전기술을 활용한 것으로 국내에서 쉽게 생산하는 PZT 세라믹을 이용하여 충격하중에 따라 발생하는 전압을 측정하였고, 아스팔트 및 콘트리트 포장 조건에 따른 압전 발전 실험을 실시하여 에너지 수확 성능을 비교 분석하였다.

• Architectural research
• /
• 제16권4호
• /
• pp.203-210
• /
• 2014

The packaged terminal air conditioner, the typical cooling system for the residential buildings, consumes a large amount of electricity in a short period time during peak hours. In order to reduce the peak load and conserve the electricity, the thermally activated building system can be used as a secondary system to handle the partial cooling load. However, the thermally activated building system may cause condensation and under-cooling. Thus, design of both systems should be performed with careful investigation in characteristics of both systems to amplify the advantages. Since the thermally activated building system has the time-delay effect which may cause under-cooling, the system is designed to handle the base load of the building. Hence, simple simulation with EnergyPlus was performed to observe the characteristics of cooling load in residential buildings. Once the possible range of the load handling ratio of the thermally activated building system was decided, characteristics of system was analyzed in terms of hardware component and operation parameters. The hardware components were analyzed in plant and system aspects and the operation parameter was evaluated in the thermal comfort aspect. As the load handling ratio increased, the thermal comfort increased due to the lower radiant mean temperatures. Within the range of thermal comfort, the several adjustments were made in setpoint temperature and electricity consumptions of difference cases were observed to decide which components and parameters were important for designing the systems.

• KIEAE Journal
• /
• 제8권6호
• /
• pp.21-26
• /
• 2008

According to the tendency of energy efficiency and environment-friendly chracteristics, demend of High-efficiency lighting using LED(Light Emitting Diode)are being increased actively and applied in various fields. However, In order to adequate application of LED light sources, it is necessary to lighting environment and luminous characteristics of LED light sources. This Study aims to characterize the work-plane lighting environment by LED light sources comparing with fluorescent light sources which are widely used. For the sake of this study, a fluorescent light source and 5 LED light sources were introduced and luminance and correlated color temperature were measured to evaluate luminance contrast. The experimental model is Mock-up which is $4.9m{\times}7.2m$ with a height of 2.9m. The test room was set up partition and desks. Luminance and correlated color temperature were measured work-plane on the desk which was set up local lighting by the Radiant Imaging ProMetric 1400. The optical characteristics data of LED can give a lot of advantages to design LED lighting appliances. Hereafter, the object of research will be conducted to evaluate effects of LED light sources on working performance, survey of visual performance, preference and physiology of subjects.

• 센서학회지
• /
• 제27권5호
• /
• pp.294-299
• /
• 2018

This article describes the output properties of non-dispersive infrared carbon dioxide($CO_2$) sensors resulting from the changes in ambient temperatures. After the developed sensor module was installed inside the gas chamber, the temperature was set to 267 K, 277 K, 300 K, and 314 K, and the concentrations of $CO_2$ gas were increased from 0 to 5,000 ppm. Then, the output voltage at each concentration was obtained. Through these experimental results, two observations were made. First, both the $CO_2$ sensor and the reference sensor showed an increase in the output voltages as the temperature rose from 0 ppm, Second, the full scale outputs of the $CO_2$ sensor grew as the temperature increased. The output characteristics were analyzed based on two factors: change in the radiant energy of the infrared light source and change in the absorptivity of $CO_2$ gas according to the ambient temperature. Additionally, temperature compensation methods were discussed.

• International journal of advanced smart convergence
• /
• 제6권1호
• /
• pp.9-17
• /
• 2017

Recent development in virtual and augmented reality increases the demand for content in many different fields. One of the fast ways to create content for VR is 3D modeling of real objects. In this paper we propose a system to reconstruct three-dimensional models of real objects from the set of two-dimensional images under the assumption that the subject does not has distinct features. We explicitly consider an object that is made of one or more surfaces and radiant constant energy isotropically. We design a low cost portable multi camera rig system that is capable of capturing images simultaneously from all cameras. In order to evaluate the performance of the proposed system, comparison is made between 3D model and a CAD model. A simple algorithm is also proposed to acquire original texture or color of the subject. Using best pattern found after the experiments, 3D model of the Pyeongchang Olympic Mascot "Soohorang" is created to use as VR content.

• 대한전자공학회논문지SP
• /
• 제38권1호
• /
• pp.79-88
• /
• 2001

항공기 등은 미사일의 추적을 피하기 위해 대응능력(countermeasure)으로 섬광탄(flare)을 운용한다. 일반적으로 적외선 섬광탄은 표적에 비해 높은 방사 에너지를 방출하여, 미사일이 표적 대신 섬광탄을 추적하도록 설계된다. 따라서 섬광탄이 존재하는 상황하에서 표적을 정확하게 추적하기 위해서는 섬광탄 및 배경 등으로부터 표적신호를 분리하여 표적을 인식해야 한다. 본 논문에서는 섬광탄의 영항을 배제하고 정확히 표적을 추적하기 위해 자외선 및 적외선 대역을 이용하는 2-color 로젯 주사 탐색기(rosette scan seeker)를 시뮬레이션 하였다. 각 대역에서 얻어진 표적 및 섬광탄, 구름 신호 특성을 분석하였으며, 이로부터 표적을 정확히 검출함을 확인하였다.

• 한국건축시공학회지
• /
• 제4권2호
• /
• pp.105-112
• /
• 2004

The objective of this study is to observe today's situation and direction in relation with the natural air-conditioning and heating system to expand the architectural utilization of natural management for human comfort and energy conservation in architectural design. Also this study to provide the fundamental knowledge and. design-techniques on environment-friendly architecture in connection with 'natural idea in architecture'. In accordance with this intention, this thesis is composed of the following contents : 1) to understand the fundermental concepts about natural air-conditioning and heating system, 2) to review the traditional characteristics in Korean and Southeast Asian architecture related to natural air-conditioning and heating system, 3) to examine modern design-techniques in relation with natural air-conditioning and heating system in the selected area, 4) to attempt to synthesize the whole situation. Environment-friendly architecture using natural ideas and design-techniques in architecture is very important architectural aspect in a current architecture, also for the future. In spite of general considerations, it is expected that this study is use to understand the principle and practical application of natural air-conditioning and heating system in architectural design.

• 대한기계학회논문집
• /
• 제18권10호
• /
• pp.2738-2750
• /
• 1994

The Effects of radiative heat transfer on turbulent flow in a partitioned enclosure is studied numerically. The enclosure is partially divided by a thin, poorly conducting vertical divider projecting from the ceiling of the enclosure. The low Reynolds number $k-{\epsilon}$ model is adopted to calculate the turbulent flow field. The solutions to the radiative transfer equations are obtained by the discrete ordinates method(DOM). This method is based on control volume method and is compatible with the SIMPLER algorithm used to solve the momentum and energy equations. The effects of optical thickness and Planck number on the flow, temperature fields and heat transfer rates are investigated for a moderate Rayleigh number($=10^9$). The changes in buoyant flow fields and temperature distributions due to the variation of baffle length are also analyzed. From the predictions, radiant heat exchange between the baffle and the sidewalls strongly influences the temperature distribution in the baffle and its vicinity and total heat transfer increases as the optical thickness and the baffle length decrease. It is possible to neglect the radiative heat transfer effect when Planck number is over one.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.983-991
• /
• 1992

본 연구에서는 정사각형 밀폐공간에서 밑면과 윗면이 각각 고온과 저온부이고 좌측, 우측면일부가 단열이며 우측면 일부는 저온부인 온돌공간으로 가정하였다. 일 사에너지가 우측면 저온부(창)으로 통과된 경우와 통과되지 않는 경우의 표면복사와 자연대류에 관하여 연구하였다.그리고 창에서 일사 에너지가 존재하는 표면복사의 경우는 표면복사와 구별하기 위하여 일사복사로 취급하였다. 표면복사 열전달을 해 석하기 위해서는 Hottel에 의해 고안된후 보안 발전된 정미복사방법(net radiation method)을 이용하여 벽면에서의 정미 복사량을 구하였으며 형상계수(shape factor)를 구하기 위하여 교차선방법(crossed string method)을 이용하였다.