• 한국지반공학회논문집
• /
• 제20권2호
• /
• pp.59-66
• /
• 2004

SCP 개량지반은 연약지반에 타설된 모래말뚝과 주변 연약지반으로 구성된 복합지반을 형성한다. 복합지반에 상재하중이 작용할 경우, SCP쪽으로 반경방향의 흐름에 의하여 시간의존적인 압밀거동이 유발될 뿐만 아니라, SCP와 주변 연약지반 사이에서 강성도 차이로 인하여 응력전이가 유발된다. 본 논문은 SCP 개량지반의 압밀거동에 대한 교란효과의 영향을 고려하기 위하여 원통형 실린더 지반에 대한 수치해석을 수행하였다. 수치해석결과 연약지반의 교란영역은 유효응력-간극수압의 거동, 응력전이기구, 응력분담비에 영향을 줌을 알 수 있었다. 또한 SCP와 점토 사이의 응력전이량은 상부 z/H=0.25에서 가장 크며, 깊이가 증가함에 따라 감소한다. 응력분담비는 상수값이 아니라 압밀과정에 의존하며, 교란영역을 가진 연약지반의 응력분담비는 교란영역이 없는 연약지반의 응력분담비보다 큼을 알 수 있다.

• Journal of Biosystems Engineering
• /
• 제27권1호
• /
• pp.1-10
• /
• 2002

This study was carried out to investigate experimentally the effect of three factors(dynamic load, inflation pressure and number of passes of tire) on soil compaction under the tire. The experiment were conducted with a 6.00R14 radial-ply tire for sandy loam soil using soil bin system. To evaluate the effect of three factors on soil compaction under the tire, the sinkage. density and volume of soil under the tire were measured fur the three levels of dynamic load(1.17kN, 2.35kN and 3.53kN), for the three levels of tire inflation pressure(103.42kPa, 206.84kPa and 413.67kPa), and for three different number of passes(1, 3 and 5). The results of this study can be summarized as follows : 1. As dynamic load, inflation pressure and number of passes of the tire increased, soil sinkage and density increased. and volume of soil decreased. Thus increase in dynamic load, inflation pressure and number of passes of the tire would increase soil compaction. 2. The effect of tire inflation pressure on sinkage. density and volume of soil under the tire was relatively less than that of the dynamic load. Therefore, it was concluded that dynamic load was more important factor affecting soil compaction in comparison to the inflation pressure of tire. 3. The effect of three different factors on sinkage, density and volume of soil decreased as the soil depth increase. Consequently, it was fecund that soil compaction at a shallow depth in soil was larger than that at deep place in soil.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.559-573
• /
• 2013

Geometrically non-linear axisymmetric bending of a shallow spherical shell with a clamped or a simply supported edge under axisymmetric load was investigated numerically. The partial load was introduced by the Heaviside step function, and the solution was obtained by the finite difference and the Newton-Raphson methods. The thickness of the shell was considered to be uniform and the material was assumed to be homogeneous and isotropic. Sensitivity analysis was made for three geometrical parameters. The accuracy of the algorithm was checked by comparing the central deflection, the radial membrane stress at the edge, or the transverse shear force with the solutions of plates and shells in the literature and good agreement was obtained. The main findings of the study can be outlined as follows: (i) If the shell is fully loaded the central deflection of a clamped shell is larger than that of a simply supported shell provided that the shell is not very shallow, (ii) if the shell is partially loaded the central deflection of the shell is sensitive to the parameters of thickness, depth, and partial loading but the influence of the boundary conditions is negligible.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.771-783
• /
• 2017

Using a transparent fracture replica with aperture size and water-cement ratio (w/c), the factors affecting the penetration behavior of rock grouting were investigated through laboratory experiments. In addition, the waterproof efficiency was estimated by the reduction of water outflow through the fractures after the grout curing process. Penetration behavior shows that grout penetration patterns present similarly radial forms in all experimental cases; however, velocity of grout penetration showed clear differences according to the aperture sizes and water-cement ratio. It can be seen that the waterproof efficiency increased as the aperture size and w/c decreased. During grout injection or curing processes, air bubbles formed and bleeding occurred, both of which affected the waterproof ability of the grouting. These two phenomena can significantly prevent the successful performance of rock grouting in field-scale underground spaces, especially at deep depth conditions. Our research can provide a foundation for improving and optimizing the innovative techniques of rock grouting.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.690-695
• /
• 2001

The three-dimensional spatial structures of impeller flow created by a six bladed Rushton turbine have identified based on the volumetric velocity information from multi-plane stereoscopic PIV measurements. A total of 10 planes with 2 mm space with a 50 mm by 64 mm size of the field of view were targeted. To reduce the depth of focus, we adopted an angle offset configuration which satisfied the Scheimpflug condition. The distortion compensation procedure was utilized during the in situ calibration. Phase-locked instantaneous data were ensemble averaged and interpolated in order to obtain mean 3-D, volumetric velocity fields on a 60 degree sector of a cylindrical ring volume enclosing the turbine blade. Using the equi-vorticity surface rendering, the spatial structure of the trailing vortices was clearly demonstrated. Detail flow characteristics of the radial jet reported in previous studies of mixer flows were easily identified.

• 대한기계학회논문집
• /
• 제16권10호
• /
• pp.1869-1876
• /
• 1992

본 연구에서는 고온에서 높은 강도특성을 유지하면서 동시에 내마모성이 뛰어 나 가스터어빈의 부재로서의 사용이 기대되는 탄화규소(SiC) 세라믹에 대하여, 고체입 자의 충격에 의해 생기는 손상에 미치는 입자의 재질 및 크기의 영향을 조사하였다. 또 각 형태의 손상발생 임계치와 강도저하에 미치는 입자크기의 영향에 관해서도 검토 하였다.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.38-47
• /
• 2002

Machining quality has been improved with the development of cutting tools. However, it is difficult to obtain a high degree of quality in machining a deep pocket with a long end mill, since machining accuracy is mainly dependent on the stiffness of the cutting tool and tool holder. To improve machining quality in machining a deep pocket using an end mill, the performance by cutting condition compare with others. Owing to this problem, it is necessary to select suitable tool and holder in the deep pocket machining. In this study, the hydraulic holder for the high speed machining is introduced and the performance of that is compared with others according to cutting conditions. The cutting parameters involved were; slenderness ratio in the range of 3 to 6 (L/D), radial depth of cut from 0.01 to 0.05 mm. Cutting force and surface roughness, precision of form were observed during the experiment to investigate cutting state.

• 대한토목학회논문집
• /
• 제10권4호
• /
• pp.53-66
• /
• 1990

산악의 영향을 받는 지역에서 비정상성 평균을 사용하는 G.C.모델에 의하여 총강우량의 우량곡면을 구성하였다. 구성된 우량곡면에 2차원 프리에 해석을 실시하여 강우의 주기성분을 분리하였다. 강우의 지엽성분, 즉 강우잔차는 우량곡면에서 주기성분을 제거하여 얻은 강우잔차를 균일한 무작위장의 표본함수라고 가정해서 이 무작위장의 특성을 자기상관함수로 나타냈다. 자기상관함수를 변환하여 스팩트럼 밀도를 구했고, 이 결과를 토대로 한강, 금강유역의 환상스팩트럼 분포함수의 모델을 제안했다.

• 한국콘텐츠학회논문지
• /
• 제12권3호
• /
• pp.434-441
• /
• 2012

축대칭 함몰지형 위를 통과하는 파의 변형에 관한 확장형 완경사 방정식의 해석해를 유도하였다. 함몰지형내의 수심은 함몰지형의 중심으로부터의 거리의 멱에 비례하여 변화된다. 지배방정식은 변수분리법을 이용하여 상미분방정식으로 변환되었으며 Hunt(1979)의 근사식을 이용하여 계수들을 파속과 군속도의 항으로 이뤄진 양함수의 형태로 나타냈다. 확장형 완경사 방정식의 바닥의 곡률과 경사의 제곱으로 이뤄진 항은 멱급수형태로 변환하였다. 마지막으로 Frobenius 급수를 사용하여 확장형 완경사 방정식의 해석해를 유도하였다. 유도된 해석해는 FEM으로 도출된 수치해와 기존의 완경사 방정식의 해석해와 비교하여 검증하였다.

• Journal of Biosystems Engineering
• /
• 제31권4호
• /
• pp.355-362
• /
• 2006

A one-dimensional heat conduction problem in cylindrical coordinate system was solved using Crank-Nicolson finite difference method to predicting the temperature distribution in rice storage bin with wall insulator. The model can simulate the grain temperatures in insulated round bins using the input data of initial grain temperature. ambient air temperature, wind velocity, solar radiation on a horizontal surface, and thermal properties of grain, bin wall, wall insulator, insulator cover, and air. Temperatures were collected at the bin center, 0.65m in radial direction from the center, and near the bin wall in 2.7m diameter bin filled with rough rice to depth of 3.0m were used to validate the simulation model. Grain temperatures predicted by the model were in very good agreement with the measured temperatures. The residual mean square error between measured and predicted grain temperatures at the bin center was $1.38^{\circ}C$.