• Journal of electromagnetic engineering and science
• /
• 제12권4호
• /
• pp.234-239
• /
• 2012

This paper presents a compact K-band Doppler radar sensor for human vital signal detection that uses a radar configuration with only single coupler. The proposed radar front-end configuration can reduce the chip size and the additional RF power loss. The radar front-end IC is composed of a Lange coupler, VCO, and single balanced mixer. The oscillation frequency of the VCO is from 27.3 to 27.8 GHz. The phase noise of the VCO is -91.2 dBc/Hz at a 1 MHz offset frequency, and the output power is -4.8 dBm. The conversion gain of the mixer is about 11 dB. The chip size is $0.89{\times}1.47mm^2$. The compact Ka-band Doppler radar system was developed in order to demonstrate remote human vital signal detection. The radar system consists of a Ka-band Doppler radar module with a $2{\times}2$ patch array antenna, baseband signal conditioning block, DAQ system, and signal processing program. The front-end module size is $2.5{\times}2.5cm^2$. The proposed radar sensor can properly capture a human heartbeat and respiration rate at the distance of 50 cm.

• 대한임베디드공학회논문지
• /
• 제13권6호
• /
• pp.289-296
• /
• 2018

Drone detection in FMCW radar system needs complex techniques because a drone beat frequency is highly dynamic and unpredictable. Therefore, the current static signal processing algorithms cannot show appropriate detection accuracy. With dynamic signal fluctuation and environmental clutters, it can fail to detect a drone or make false detection. It affects to the radar system integrity and safety. Constant false alarm rate (CFAR), one of famous static signal process algorithm is effective for static environment. But for drone detection, it shows low detection accuracy. In this paper, we suggest neural network based FMCW radar system for detecting a drone. We use recurrent neural network (RNN) because it is the effective neural network for signal processing. In our FMCW radar system, one transmitter emits FMCW signal and four-way fixed receivers detect reflected drone beat frequency. The coordinate of the drone can be calculated with four receivers information by triangulation. Therefore, RNN only learns and inferences reflected drone beat frequency. It helps higher learning and detection accuracy. With several drone flight experiments, RNN shows false detection rate and detection accuracy as 21.1% and 96.4%, respectively.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
• /
• pp.425-428
• /
• 2001

In this paper, FMCW radar signal processing technique for the vehicle detection system are studied. And FMCW radar sensor is used as a equipment for vehicle detection. To test the performance of developed algorithm, the evaluation of the algorithm is done by simulation for signal processing technique of vehicle detection system. RADAR signal of a driving vehicle is generated by using the Matlab. Distance and velocity of vehicles are calculated with developed a1gorithm. Also the signal processing procedure is done for the virtual data with FM-AM converted noise.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.1064-1066
• /
• 2003

In this paper, ground penetrating radar (GPR), which has the capability to detect non metal and plastic mines, is proposed to detect and discriminate antipersonnel (AP) landmines. The time domain GPR - Impulse radar and frequency domain GPR - SFCW (Stepped Frequency Continuous Wave) radar is utilized for metal and non-metal landmine detection and its performance is investigated. Since signal processing is vital for target reorganization and clutter rejection, we implemented the MUSIC (Multiple Signal Classification) algorithm for the signal processing of SFCW radar data and SAR (Synthetic Aperture Radar) processing method for the signal processing of Impulse radar data.

• 제어로봇시스템학회논문지
• /
• 제12권4호
• /
• pp.353-357
• /
• 2006

The vehicle detection method using pulse radar has the advantage of maintenance in comparison with loop detection method. We propose the pulse radar signal processing algorithm in which we devide the trace. data from pulse radar into segments by using SSC concept, and then construct the sectors in accordance with period and amplitude of segments, and finally decide the vehicle detection probability by applying the SSC parameters of each sectors into the discriminant function. We also improve the signal processing time by reducing the quantities of processing data and processing routines.

• 한국항행학회논문지
• /
• 제23권2호
• /
• pp.134-141
• /
• 2019

레이다 시스템은 송신 파형에 따라 크게 PD (pulse Doppler) 레이다와 FMCW (frequency modulated continuous wave) 레이다로 구분되며, 송수신 특성에 따라 PD 레이다는 장거리 표적 검출에 유리한 반면, FMCW 레이다는 단거리 표적 검출에 적합한 특성을 갖는다. 이에 본 논문에서는 중/장거리 뿐 아니라 단거리 무인기 탐지를 위해 PD 레이다 시스템과 FMCW 레이다 시스템을 모두 지원 가능한 멀티모드 레이다 신호처리 프로세서 (RSP; radar signal processor)를 제안한다. 제안된 레이다 신호처리 프로세서는 Verilog-HDL을 이용하여 RTL 설계 후, Altera Cyclone-IV FPGA를 이용하여 구현 및 검증 되었다. 구현 결과, 총 19,623개의 logic elements, 9,759개의register, 그리고 25,190,400의 memory bit로 구현 가능함을 확인하였으며, 기존의 PD 레이다와 FMCW 레이다 신호처리 프로세서를 개별 구현한 경우에 비해 logic elements와 register 요구량이 약 43%와 39% 감소됨을 확인하였다.

• 한국전자파학회논문지
• /
• 제30권1호
• /
• pp.79-87
• /
• 2019

강우 환경에서 레이다는 기상 클러터 반사 신호에 의해 신호처리기 내 잡음레벨 증가와 적응형 CFAR의 탐지 임계값 증가로 표적에 대한 탐지거리가 감소하게 된다. 또한, 강우 클러터에 의해 발생한 고속클러터는 기존의 클러터 제거기법의 제거범위를 벗어나 사라지지 않는다. 이로 인하여 강우시 레이다는 맑은 날에 비해 고속 클러터의 추적을 방지하기 위한 확인횟수가 증가되어 표적 탐지 기회가 감소된다. 이에 본 논문은 강우에 의한 레이다 탐지성능 저하를 해결하기 위해 레이다 수신 신호 저장장치를 이용하여 비정상 수신 신호를 획득하였다. 이들에 대한 분석을 바탕으로 신호처리기 앞단에서 최적감쇄값을 결정하고, 강우 시 감쇄적용결과 레이다 탐지성능이 개선됨을 모의시험 및 수신신호 분석을 통해 확인하였다.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.70-76
• /
• 2012

We compare the detection probabilities of the time-reversal(TR) detection system and the conventional radar system. The target is assumed to be hidden inside a random medium such as a forest. We propose a TR detection system based on the SAR(Synthetic Aperture Radar) algorithm. Unlike the conventional SAR images, the proposed TR-SAR system has an interesting property. Specifically, the target-related signal components due to the time-reversal refocusing characteristics, as well as some of clutter-related signal components are concentrated at the time-reversal reference point. The remaining clutter-related signal components are scattered around that reference point. In this paper, we model the random media as a collection of point scatterers to avoid unnecessary complexities. We calculate the detection probability of the TR radar system based on the proposed simple random media model.

• Journal of Astronomy and Space Sciences
• /
• 제35권4호
• /
• pp.279-286
• /
• 2018

Radar sensors are used for space situational awareness (SSA) to determine collision risk and detect re-entry of space objects. The capability of SSA radar system includes radar sensitivity such as the detectable radar cross-section as a function of range and tracking capability to indicate tracking time and measurement errors. The time duration of the target staying in a range cell is short; therefore, the signal-to-noise ratio cannot be improved through the pulse integration method used in pulse-Doppler signal processing. In this study, a method of improving the signal-to-noise ratio during range migration is presented. The improved detection performance from signal processing gains realized in this study can be used as a basis for comprehensively designing an SSA radar system.

• 한국통신학회논문지
• /
• 제42권5호
• /
• pp.982-984
• /
• 2017

시간 영역에서 펄스 레이다 신호는 송신 펄스가 존재하는 구간과 표적으로부터 반사된 수신 신호가 존재하는 구간으로 구분할 수 있으며, 수신 신호 성분은 송신 펄스에 비해 크기가 매우 작고, 표적으로 부터 반사된 성분을 제외하고는 잡음으로 구성되어 있다. 본 논문에서는 이러한 성질을 이용하여 잡음 전력에 대한 불확실성이 존재하는 환경에서 에너지 검파를 이용하여 레이다 신호를 검출하는 방안을 제시하고자 한다.