• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.2
• /
• pp.10-20
• /
• 1997

This paper describes the design, the manufacture and the development of th eautomatic gain control unit which ajdusts the gain of IF processor in the high sensitive & multifunctional receiver unit (HMR) for pulse doppler radar system. Accodording to the effective distnce of target, radar cross section, and a lot of external environments (such as clutter), the receiving stage of RADAR system often deviates from dynamic range. To solve this kind o fproblem, continuous/pulse wave AGC are realized, make it possible to control the gain characteristics of receiver stably, and can increase dynamic range linearly by adjusting the gain slope of receiver which is limited by 1-dB gain compression point. In this study, AGC unit is designed to regulate the total gain of receiver by using te analog feedback theory. It also has rapid enough response to process pulse signal. This study presents the gain control method of IF, the real manufacture technique (the package-type components) and the measurement performance of AGC.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.65-72
• /
• 2011

A binary integration is one of sub-optimal pulse integration which decides detection based on discriminating m successful detections out of n trials in radar systems using multiple pulse repetition frequencies. This paper introduces target measurement error reduction technique to reduce azimuth errors in suboptimal binary integration radar which applies the near value by m rather than the optimal m and verifies the performance by analyzing the experimental data measured from real radar.

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.6
• /
• pp.372-381
• /
• 2014

This study examined a radar signal active cancelation technique, which is a theoretical way of achieving stealth by employing a baseband process that involves sampling the incoming hostile radar signal, analyzing its characteristics, and generating countermeasure signals to cancel out the linear-FM signal of the hostile radar signal reflected from the airborne target. To successfully perform an active cancelation, the effects of errors in the countermeasure signal were first analyzed. To generate the countermeasure signal that requires very fast and accurate processing, the down-sampling technique with the suboptimal maximum likelihood estimation (sMLE) scheme was proposed to improve the speed of the estimation process while preserving the estimation accuracy. The simulation results showed that the proposed down-sampling technique using a 2048 FFT size yields substantial power reduction despite its small FFT size and exhibits similar performance to the sMLE scheme using the 32768 FFT size.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.652-659
• /
• 2009

To analyze and verify the performance of a pulse radar without the real target data, there is a need to make the simulated signal which is similar to the received signal of the real target. In this paper, a method of the received signal generation for the pulse radar is proposed to solve the above need. The user-made scenarios are used to model the fast and small target and the clutter data based on the ground environment. These data are transformed into the electric signal using the proposed method. The efficiency of the proposed method is proved by comparing the signal of a field test with the simulated signal.

• Korean Journal of Remote Sensing
• /
• v.34 no.4
• /
• pp.591-600
• /
• 2018

Recent SAR systems provide fully polarimetric SAR data, which is known to be useful in a variety of applications such as disaster monitoring, target recognition, and land cover classification. The objective of this study is to evaluate the performance of polarization SAR data for landslide detection. The detectability of different SAR parameters was investigated based on the supervised classification approach. The classifier used in this study is the Adaptive Boosting algorithms. A fully polarimetric L-band PALSAR-2 data was used to examine landslides caused by the 2016 Kumamoto earthquake in Kyushu, Japan. Experimental results show that fully polarimetric features from the target decomposition technique can provide improved detectability of landslide site with significant reduction of false alarms as compared with the single polarimetric observables.

• Journal of electromagnetic engineering and science
• /
• v.19 no.2
• /
• pp.107-114
• /
• 2019

Alert-confirm detection is a highly efficient method to improve phased array radar search performance. It comprises sequential detection in two steps: alert detection, in which a target is detected at a low detection threshold, and confirm detection, which is triggered by alert detection with a longer dwell time to minimize false alarms. This paper provides a design method for applying the alert-confirm detection to multifunctional radars. We find optimum dwell times and false alarm probabilities for each alert detection and confirm detection under the dual constraints of total false alarm probability and maximum allowable dwell time per position. These optimum values are expressed as a function of the mean new target appearance rate. The proposed alert-confirm detection increases the maximum detection range even with a shorter frame time than that of uniform scanning.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.448-458
• /
• 2013

In this paper, we present the performance and the experimental results of the adaptive beamformer in the radar system with the planar active array. The study of the adaptive beamformer has already been performed in several literatures, but it is difficult to find the results or examples those are implemented in the actual radar system. Here we employ the adaptive beamformer to the practical radar system with subarray architecture. The performance of beamformer will be demonstrated by modeling and simulation and finally the far-field experimental results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.4
• /
• pp.549-554
• /
• 2008

Support Vector machine is the classifier which is based on the statistical training theory. Twin Support Vector Machine(TWSVM) is a kind of binary classifier that determines two nonparallel planes by solving two related SVM-type problems. The training time of TWSVM is shorter than that of SVM, but TWSVM doesn't shows worse performance than that of SVM. This paper proposes the TWSVM which is applied fuzzy membership, and compares the performance of this classifier with the other classifiers using Ionosphere radar data set.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1551-1558
• /
• 2014

We propose a multi-rate sensor fusion of vision and radar using Kalman filter to solve problems of asynchronized and multi-rate sampling periods in object vehicle tracking. A model based prediction of object vehicles is performed with a decentralized multi-rate Kalman filter for each sensor (vision and radar sensors.) To obtain the improvement in the performance of position prediction, different weighting is applied to each sensor's predicted object position from the multi-rate Kalman filter. The proposed method can provide estimated position of the object vehicles at every sampling time of ECU. The Mahalanobis distance is used to make correspondence among the measured and predicted objects. Through the experimental results, we validate that the post-processed fusion data give us improved tracking performance. The proposed method obtained two times improvement in the object tracking performance compared to single sensor method (camera or radar sensor) in the view point of roots mean square error.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.61-68
• /
• 2018

In this paper, we described about methods and results to verify the Tx/Rx beam characteristics of a planar active phased array antenna as using a near-field measurement. The near-field system can effectively measure multiple beams and predict the performance degradation due to the partial failure of individual elements. Also, it can accurately predict the EIRP relating to detection performance of the active phased array radar. We briefly described the near-field measurement method to verify the Tx/Rx beam characteristics, and then verified the effectiveness of measurement method by analyzing the measured results.