• Wind and Structures
• /
• v.36 no.1
• /
• pp.1-14
• /
• 2023

To evaluate the wind shielding effect of bridge towers with multiple limbs on high-speed trains, a wind tunnel test was conducted to investigate the aerodynamic characteristics of vehicles traversing multi-limb towers, which represented a combination of the steady aerodynamic coefficient of the vehicle-bridge system and wind environment around the tower. Subsequently, the analysis model of wind-vehicle-bridge (WVB) system considering the additional moments caused by lift and drag forces under nonuniform wind was proposed, and the reliability and accuracy of the proposed model of WVB system were verified using another model. Finally, the factors influencing the wind shielding effect of multi-limb towers were analyzed. The results indicate that the wind speed distributions along the span exhibit two sudden changes, and the wind speed generally decreases with increasing wind direction angle. The pitching and yawing accelerations of vehicles under nonuniform wind loads significantly increase due to the additional pitching and yawing moments. The sudden change values of the lateral and yawing accelerations caused by the wind shielding effect of multi-limb tower are 0.43 m/s² and 0.11 rad/s² within 0.4 s, respectively. The results indicate that the wind shielding effect of a multi-limb tower is the controlling factor in WVB systems.

• Journal of Radiation Protection and Research
• /
• v.43 no.1
• /
• pp.29-38
• /
• 2018

Background: Radon contributing about 42% of annual average dose, mainly comes from soil. In this paper, standard measurement procedures for soil radon exhalation rate are suggested and their measurement uncertainties are analyzed. Materials and Methods: We used accumulation method for estimating surface exhalation rate. The closed-loop measurement system was made up with a RAD7 detector and a surface chamber. Radon activity concentrations in the system were observed as a function of time, with data collection of 5 and 15-minute and the measurement time of 4 hours. Linear and exponential fittings were used to obtain radon exhalation rates from observed data. Standard deviations of measurement uncertainties for two approaches were estimated using usual propagation rules. Results and Discussion: The exhalation rates (E) from linear approach, with 30 minutes measurement time were $44.8-48.6mBq{\cdot}m^{-2} {\cdot}s^{-1}$ or $2.14-2.32atom{\cdot}cm^{-2}{\cdot}s^{-1}$ with relative measurement uncertainty of about 10%. The contributions of fitting parameter A, volume (V) and surface (S) to the estimated measurement uncertainty of E were 59.8%, 30.1% and 10.1%, in average respectively. In exponential fitting, at 3-hour measurement we had E ranged of $51.6-69.2mBq{\cdot}m^{-2} {\cdot}s^{-1}$ or $2.46-3.30atom{\cdot}cm^{-2}{\cdot}s^{-1}$ with about 15% relative uncertainty. Fitting with 4-hour measurement resulted E about $51.3-68.2mBq{\cdot}m^{-2} {\cdot}s^{-1}$ or $2.45-3.25atom{\cdot}cm^{-2}{\cdot}s^{-1}$ with 10% relative uncertainty. The uncertainty contributions in exponential approach were 75.1%, 13.4%, 8.7%, and 2.9% for total decay constant k, fitting parameter B, V, and S, respectively. Conclusion: In obtaining exhalation rates, the linear approach is easy to apply, but by saturation feature of radon concentrations, the slope tends to decrease away from the expected slope for extended measurement time. For linear approach, measurement time of 1-hour or less was suggested. For exponential approach, the obtained exhalation rates showed similar values for any measurement time, but measurement time of 3-hour or more was suggested for about 10% relative uncertainty.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.27 no.4
• /
• pp.307-314
• /
• 2005

After dental implant are planted into their bony site among the various growth factors associated with bone formation. BMP is expressed in the bone surrounding the implant fixture. By taking a close look at BMP2, BMP4 which are growth factors that take put in bone formation, its histologic features and radiographic bone healing patterns we would like to examine the mechanism of osseointegration. We randomly used 8 male and female house rabbit amd used diameter 5 mm height spiral shaped implants(Ostem, Korea) for animal use handled as a resorbable blast machined(RBM) surface and machined surface. 2group were formed and each group had RBM surface and machined surface implant or a simple bone cavity. After 3, 7, 14 and 28 days post surgery 2 objects were sacrificed from each group and histologic specimens were acquired. RT-PCR analysis was conducted and after H&E staining the extent of osseointegration was measured applying a histologic feature and histomorphometric analysis program. Quanitity one -4.41(Bio-Rad, USA) was used after scanning the PCR product image of the growth factors manifested in each group. According to the histomorphometric features the RBM, Machined surface group showed increased contact between bone and implant surface at 3, 7, 14 and 28 days after surgery. The BMP2 level increased in both experiment groups but remained unchanged in the contrast group. BMP4 levels stayed steady after the early post implantation period for RBM but showed decreased in the machined surface group and contrast group. The amount of contact between bone and implant surface increased with the passage of time. BMP2, BMP4 were expressed in both experimental group and contrast group. These growth factors play a role in osseointegration of implant.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.4
• /
• pp.395-405
• /
• 2001

A test program was conducted on seismic-resistant steel moment connections constructed using Reduced Beam Sections with beam web openings. In the connection, in order to enhance ductility capacity under severe cyclic loads, a portion of the beam web near the beam-to-column connection is cut out instead of the beam flange as in dogbone connections. A total of 4 large scale specimens were tested in this program. The specimens were all made using $H-458{\times}417{\times}30{\times}50$ sections for the columns and $H-792{\times}300{\times}14{\times}22$ sections for the beams. Test specimens showed excellent performance similar to that of dogbone connections.

• Journal of Chest Surgery
• /
• v.20 no.2
• /
• pp.241-250
• /
• 1987

We scrutinized the preoperative electrocardiographic and hemodynamic findings in adult atrial septal defects older than 15 years, and then followed up the postoperative electrocardiographic changes sequentially. In preoperative electrocardiographs, the mean PR interval [0.17 sec] was prolonged than normal adults [M;0.13,F;0.15], and the mean QRS axis [93.1*] was deviated to rightward than normal [M;63.7*,F;64.4*], and 122 cases of all 159 patients [77.8%] were in RAD quadrant. The QRS morphology was classified into three groups; a] crista supraventricularis hypertrophy, 25 cases, b] right ventricular outflow tract hypertrophy, 89 cases, c] right ventricular hypertrophy, 44 cases, and normal rs pattern, 1 case. Comparing the QP/QS, Pp/Ps, Rp/Rs in these three groups, Qp/Qs increased a] 2.65 to b] 2.97 and decreased b] 2.97 to c] 2.55, Pp/Ps increased a] 0.27 to b] 0.35 to c] 0.44, and Rp/Rs increased a] 0.1 to b] 0.14 to c] 0.2. In comparing the atrial fibrillation with sinus rhythm, the patient`s mean age was increased [26.4 to 45.7], the mean Qp/Qs was decreased [2.97 to 2.7], the mean Pp/Ps was increased [0.35 to 0.46], the mean Rp/Rs increased [0.14 to 0.2], and the QRS morphology was RVOT hypertrophy;7 cases, RVH;2 cases in all 11 cases. Therefore, the atrial fibrillation was appeared in progressed status. Increasing the mean pulmonary arterial pressure, size of the R` wave in Vl lead increased, and the QRS morphology tended to become severe patterns. Postoperatively, the PR interval shortened and QRS axis tended to normal axis quadrant, and size of R` wave decreased sequentially, atrial fibrillation disappeared in 4 cases. Conclusively, by use of the conventional surface electrocardiography, we could anticipate the hemodynamic changes and the prognosis at outpatient department.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.2747-2751
• /
• 2013

In this study we assessed the dietary phytochemical index in relation to the risk of breast cancer in women. This case-control study was conducted on 100 incident breast cancer cases and 175 healthy controls. Data regarding socio-demographic factors, medical history, medications, and anthropometric measurements were collected. Dietary data were obtained using a validated food frequency questionnaire and a energy-adjusted dietary phytochemical index (PI) was calculated. The odds ratios of breast cancer were assessed across energyadjusted PI quartile categories. The mean age of participants was $46.2{\pm}8.9$ and $45.9{\pm}9.4$ years in cases and controls, respectively. The mean PI across quartile categories was $13.9{\pm}2.6$, $21.1{\pm}1.8$, $26.7{\pm}2.1$, $41.6{\pm}10.2$ in the first, second, third and fourth quartiles, respectively. After adjustment for all potential confounders, the risk of breast cancer in the forth quartile of dietary PI was significantly decreased (OR=0.08, 95%CI=0.01-0.84). Higher intake of phytochemical-rich foods is associated with lower risk of breast cancer.

• Journal of Plant Biology
• /
• v.6 no.3
• /
• pp.6-14
• /
• 1963

YIM, Kyong Bin (Coll. of Agriulture, Seoul National University) Effect of neutron and gamma irradiation on the germination of diploid and tetraploid rye seeds. Kor. Jour. Bot. VI(3):6-14, 1964. Tetraploid rye, Secale cereale 4x, was more tolerant to fast nuetron than diploid rye. Root growth was more suppressed than was seedling height in both diploid and tetraploid rye. A stimmulative effect on the dry weight of the shoot could be observed at very low doses of irradiation. It was the fact that the lower the moisture content of the seeds, the higher the radiosensitivity. Concerning seedling height growth, the effectiveness ratio of N/X equalled about 20.0 in diploid rye and about 18.2 in tettraploid rye, when the 50% dose ratios is used for this quotient calculaiton.

• The Korean Journal of Zoology
• /
• v.14 no.3
• /
• pp.119-124
• /
• 1971

Male mice of strain SM were given 128 rads of single whole-body gamma-irradiation of $^{60}Co$, 14 to 16 minutes following a subcutaneous injection of physiological saline or cortisone acetate (1mg/day, for 4 days preirradiation). The serum protein patterns and the level of the total serum proteins were determined at various time intervals after exposure. Total serum protein was determined by Biuret method and serum protein fractions and A/G ratio were determined by paper electrophoresis using Whatman No.1 filter paper and barbital buffer (pH 8.6, ionic strength 0.06). 1. Total body gamma-irradiation caused a rise in the level of the total serum protein at 1 day and in the level of the serum albumin-globulin ratio at 5 days in both cortisone acetate-treated and control groups. 2. Cortisone acetate delayed the total serum protein rise at 5, 10, and 20 days after exposure. 3. Cortisone acetate delayed the A/G ratio rise at 1, 5, and 10 days after exposure. 4. It may be inferred that cortisone greatly reduces the sensitivity of mice to gamma-irradiation on the blood protein, probided that cortisone is given before the exposure.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.177-184
• /
• 2009

For the purpose of reducing the cost for greenhouse operation by acquiring the electric power necessary for it, this study installed a solar photovoltaic system on the roof of the building adjacent to green-houses and experimentally examined the quantity of power generation based on weather conditions. The results of the study are as per the below: The maximum, average and minimum temperature while the experiment was conducted was $0.4{\sim}34.1,\;-6.1{\sim}22.2$, and $-14.1{\sim}16.7^{\circ}C$ respectively, and the solar radiation was $28.8MJ{\cdot}m^{-2}$ (maximum), $14.9MJ{\cdot}m^{-2}$ (average), and $0.6MJ{\cdot}m^{-2}$ (minimum). The quantity of electric power didn't increase in proportion to the quantity of solar radiation and instead, it was almost consistent around 750W. Daily maximum, average and minimum consumption of electric power was 5.2kWh, 2.5kWh and 0kWh respectively. Based on the average electric power consumption of the system used for this experiment, it was sufficient in case the capacity and the working time of a hot blast heater are small, but it was short in case they are big. In case the capacity of the hot blast heater is big, the average electric power quantity will be sufficient for array area $21m^2$, about three times of the present area. In summer when the temperature of the array becomes high, the generation of electric power didn't increase in proportion to the quantity of solar radiation, but this experiment result shows a high correlation between two factors (coefficient of correlation 0.84).

• Korean Journal of Clinical Laboratory Science
• /
• v.41 no.1
• /
• pp.37-41
• /
• 2009

Measurement of hemoglobin A1c is used as an objective indicator of long-term blood glucose control in diabetic patients. We evaluated recently introduced Norudia$^{(R)}$ HbA1c (Daiichi Pure Chemical Co. Ltd, Tokyo, Japan) test reagent using enzyme method for HbA1c assay. Linearity, precision and correlation with VARIANT$^{TM}$ II Turbo HbA1c analyzer (BIO-RAD, Hercules, CA, USA) were evaluated. The reference range was determined from 201 healthy subjects. The Norudia$^{(R)}$ HbA1c test reagent was founded to be linear in a range of 5.6% to 14.0% ($r^2=0.9885$). The within-run and between-day precision were 0.954% and 1.03% for low level (HbA1c 5.24%), 0.67% and 1.28% for high level (HbA1c 9.01%), respectively. Comparison study between Norudia$^{(R)}$ HbA1c test reagent and VARIANT$^{TM}$ II Turbo showed good correlation with a slope of 1.0489. an intercept at -0.9717, and coefficient of correlation was 0.9907. The reference range of HbA1c obtained from this reagent was 4.07-5.50%. The Norudia$^{(R)}$ HbA1c test reagent showed good linearity, precision and correlation with HbA1c analyzer with HPLC method. In addition, the exclusive analyzer is not required for assay and then this kit may be useful for HbA1c assay in clinical laboratory.