• 한국수학교육학회지시리즈E:수학교육논문집
• /
• 제3권
• /
• pp.229-249
• /
• 1997

폴리아가 그의 저서 ‘How to Solve It.'에서 주창한 문제 해결의 모형은 이렇게 해석될 수 있다. 곧, 절대 다수의 수학 문제는 조건문 (p${\rightarrow}$q)의 명제 형식으로 분해된다는 것이다. 그리하여 순조롭게 발생되는 문제 해법의 전과정은 아래와 같이 마치 징검다리를 놓듯 추이율(transitivity)을 연거퍼 적용하는(이른바 연추적이라 함) 절차이다. (p: 주어진 정보) ${\rightarrow}$ ${\cdots}$ ${\rightarrow}$ ${\cdots}$ ${\rightarrow}$ (구하는 정보: q) 이것은, 일반적으로, 추이율이 성립하는 모든 관계(relation)의 연추적 확인 과정으로 확장될 수 있다. 요컨대 항진식 (p${\rightarrow}$r) ${\wedge}$ (r${\rightarrow}$q) ${\rightarrow}$ (p${\rightarrow}$q)의 보장 아래 관계의 추이율 xRz ${\wedge}$ zRy ${\rightarrow}$ xRy 로 연결되는 온갖 경로를 포괄한다. 이상과 같이 정식화되는 이 도식의 한계와 효용은 (1) 모든 문제가 조건문의 형태를 갖추고 있는 것은 아니며, (2) 조건문 형식의 문제라도 해법이 반드시 연추적으로 발생되는 법도 아니고, (3) 더구나 이것이 해법 발생의 만능 열쇠는 아닐뿐더러, (4) 발상을 촉진하는 데는 교육공학적으로 더 정교한 배려가 필요하므로, (5) 초보 단계에서 행동 수정을 위한 치유 목적으로 사용됨이 바람직하다.

• 한국광학회지
• /
• 제13권5호
• /
• pp.421-424
• /
• 2002

반도체 광증폭기에 기반을 둔 소자들을 이용한 전광 반가산기가 처음으로 구현되었다. 전광 반가산기의 동작속도와 신호 형식은 각각 10Gb/s와 RZ였다. 전광 반가산기의 SUM과 CARRY의 동작에는 각각 전광 XOR 논리소자와 전광 AND 논리 소자가 이용되었으며 두 연산이 동시에 구현되었다.

• 한국기계가공학회지
• /
• 제20권7호
• /
• pp.15-24
• /
• 2021

In this paper, to analyze the types of surface morphology error according to factors that cause machining error, the experiments were conducted in the ultra-precision diamond machine using a diamond tool. The factors causing machining error were classified into the pressure variation of compressed air, external shock, tool errors, machining conditions (rotational speed and feed rate), tool wear, and vibration. The pressure variation of compressed air causes a form accuracy error with waviness. An external shock causes a ring-shaped surface defect. The installed diamond tool for machining often has height error, feed-direction position error, and radius size error. The types of form accuracy error according to the tool's errors were analyzed by CAD simulation. The surface roughness is dependent on the tool radius, rotational speed, and feed rate. It was confirmed that the surface roughness was significantly affected by tool wear and vibration, and the surface roughness of Rz 0.0105 ㎛ was achieved.

• 한국정보통신학회논문지
• /
• 제17권10호
• /
• pp.2466-2472
• /
• 2013

40 채널의 파장 다중화된 광신호를 3000 km 까지 전송하면서 후치분산 보상 방법의 차이에 따른 성능 변화를 조사하였다. 개별 광신호는 10 Gbps 대역폭의 RZ 신호포맷을 사용하였고 40 채널들의 파장은 1533.5 nm에서 1564.7 nm 사이에 100 GHz 의 주파수 간격을 가졌다. 후치분산 보상을 위해 40개의 개별채널 별로 후치분산을 최적화하는 경우, 전 40 채널들을 하나의 분산값으로 후치분산 보상하는 경우, 그리고 제안된 방법으로 8개씩 묶은 채널 그룹별로 최적화하는 경우의 세가지 경우가 비교되었다. 최저 성능 채널과 그 성능 값은 세가지 방식에서 차이가 없었다. 최고 성능값은 전 채널을 하나의 후치분산 값으로 사용하는 경우가 다른 두 가지 방식에 비해 성능에 떨어졌지만 그룹별 방식이나 개별 채널별 방식은 차이가 없었다. 따라서 채널 그룹별로 후치분산을 통해 신호 성능의 희생 없이 전송시스템을 단순화시킬 수 있음을 확인하였다.

• 생약학회지
• /
• 제24권2호
• /
• pp.116-123
• /
• 1993

The genus Ganoderma is typical wood-rotting fungi and its fruiting body has been used as an important herb in oriental medicine. Recent research discovered antitumor components from Ganoderma lncidum. Various Ganoderma species are being cultivated in Korea. However, taxonomic system of the genus Ganoderma has been based mainly on the macromorphology of fruiting bodies and the ultrastructural characteristics of basidiospores. Since there are similar characteristics in Ganoderma mycelia grown on the same artificial media, it is suggested that the compatibility of the fungi by di-mon mating be used as an aid to determine the identity of species in addition to the conventional characterization. In this study, we examined physiological and genetical properties such as growth temperature, pH, compatibility and enzyme or protein patterns of laccase, esterase and cellular proteins of G. lucidum RZ, G. tsugae and Ganoderma species cultivated in Korea by electrophoresis for characterization of the isolates. We found that compatibility test and isozyme patterns of laccase and esterase of the mycelia could be used for the differentiation of the isolates. These results showed that Ganoderma species cultivated in Korea is genetically similar to G. lucidum but physiologically closer to G. tsugae than to G. lucidum.

• 한국작물학회지
• /
• 제44권4호
• /
• pp.345-349
• /
• 1999

This study was carried out to map Bphl and bph2 gene in Mudgo and Sangju13 (Oryza sativa L.) respectively conferring resistance to brown plan-thopper (BPH) and to establish the marker-assisted selection (MAS) system. Bulked seedling (grown for 20 days) test was conducted with the 73 F4 lines derived from a cross between Nagdongbyeo and Mudgo for Bphl and with 53 BC3F5 lines derived from the Milyang95/Sangju13 cross for bph2. Bph1 was mapped between RG413 and RG901 on chromo-some 12 at a distance of 7.5 cM from RG413 and 8.4 cM from RG90l. A recessive gene bph2 was located near RZ76 on chromosome 12 at a distance of 14.4 cM. Bphl and bph2 were linked to each other with a distance of about 30 cM. An RFLP marker, RG413 linked to Bphl, was converted to an STS marker to facilitate the marker-assisted selection. BPH resistant genotypes could be selected with 92% accuracy in a population derived from a line of NM47-B-B.

• Journal of Microbiology and Biotechnology
• /
• 제11권6호
• /
• pp.1115-1119
• /
• 2001

Eight Escherichia coli cells with aerobic growth deflects were isolated by the insertion of ${\lambda}placMu53$, a hybrid bacteriophage of ${\lambda}$ and Mu, which created transcriptional fusion to lacZY. Two of these mutants, CLIO and CLl2, were irradiated with UV to obtain specialized transducing phages. The phages that took out the neighboring chromosomal DNA of the related gene responsible for deflective aerobic growth were identified. The in vivo cloned chromosomal sequence revealed that the mutated gene of CLIO was located at min 34.5 on the Escherichia coli linkage map and 1,599,515 on the physical map. The physical map indicated that there were 7 cistrons in the operon. We named this operon oxg10. The promoter sequence of oxg10 exhibited a possible binding site far SoxS, a transcriptional regulator that activates the transcription of various SoxRS regulon genes. Transferring the oxg10:: ${\lambda}placMu53$ mutation into the wild-type strain, RZ4500, resulted in the inhibition of normal aerobic growth, while the salute mutation in strain MO inhibited aerobic cell growth completely. The full operon sequences of oxg10 were cloned from the Excherichia coli genomic library. The mutated gene of CLl2 was identified to be a sucA gene encoding the ${\alpha}$-ketoglutarate dehydrogenase El component in the TCA cycle.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.63-63
• /
• 2003

There are many actuators and sensors used for attitude control system for KOMPSAT such as Reaction Wheel Assembly, Magnetic Torque Assembly, Dual Thruster Module, Solar array Drive, Three Axis Magnetometer, Conical Earth Sensor, Fine Sun Sensor Assembly, Coarse Sun Sensor Assembly, Gyro Reference Assembly and so on. For KOMPSA T satellite it has been considered using the Magnetic Torquer (MTQ) generating the magnetic dipole moment. In general, the magnetic dipole moment for satellite attitude control system is used for dumping out the excessive reaction wheel momentum so that the reaction wheel speed is not saturated. The objective of this study is to analyze the magnetic field characteristics generated by the Magnetic Torquer using the Maxwell 2D Field Simulator software. Currently, the developing model (DM) of the MTQ is being developed and manufactured at a company under the supervision of KARL MTQ is an electromagnet consisting of a ferromagnetic cylindrical core on which an excitation coil is wound. A current is passed through the coil to produce a dipole momentum in the ferromagnetic core. The configuration of the MTQ will be introduced in the presentation. The 2 dimensional model of the MTQ is drawn as axisymmetric models in RZ plane, and each corresponding material is assigned to the each MTQ object, the core, coil, and background. After the boundary conditions, current sources, and solution parameters are set up, the magnetic field intensities, directions, and other values specified by users can be calculated by using the finite element analysis. The theoretical magnetic field quantities obtained by the Maxwell 2D Simulator can be used for the basis of the development of the MTQ.

• Journal of Ecology and Environment
• /
• 제39권1호
• /
• pp.31-42
• /
• 2016

The object of this study was to determine long-term temporal and spatial patterns of nutrients (nitrogen and phosphorus), suspended solids, and chlorophyll (Chl) in Chungju Reservoir, based on the dataset of 1992 - 2013, and then to develop the empirical models of nutrient-Chl for predicting the eutrophication of the reservoir. Concentrations of total nitrogen (TN) and total phosphorus (TP) were largely affected by an intensity of Asian monsoon and the longitudinal structure of riverine (Rz), transition (Tz), and lacustrine zone (Lz). This system was nitrogen-rich system and phosphorus contents in the water were relatively low, implying a P-limiting system. Regression analysis for empirical model, however, showed that Chl had a weak linear relation with TP or TN, and this was mainly associated with turbid, and nutrient-rich inflows in the system. The weak relation was associated with non-algal light attenuation coefficients (Kna), which is inversely related water residence time. Thus, values of Chl had negative functional relation (R² = 0.25, p < 0.001) with nonalgal light attenuation. Thus, the low chlorophyll at a given TP indicated a light-limiting for phytoplankton growth and total suspended solids (TSS) was highly correlated (R² = 0.94, p < 0.001) with non-algal light attenuation. The relations of Trophic State Index (TSI) indicated that phosphorus limitation was weak [TSI (Chl) - TSI (TP) < 0; TSI (SD) - TSI (Chl) > 0] and the effects of zooplankton grazing were also minor [TSI (Chl) - TSI (TP) > 0; TSI (SD) - TSI (Chl) > 0].

• 한국작물학회지
• /
• 제51권6호
• /
• pp.565-570
• /
• 2006

The viviparous germination (VG) with lodging caused the yield reduction and quality deterioration in rice. We carried out the evaluation of VG tolerance (on the 40th day after heading) and mapping QTLs associated with VG tolerance using the recombinant inbred lines (M/G RILs) from a cross between Milyang 23 (japonica/indica) and Gihobyeo (japonica). The VG rates of Milyang 23 and Gihobyeo were 0.0 and 7.0%, respectively. The averaged VG rate of 162 M/G RILs was 7.7%, and their range was from 0.0 to 50.9%. Of the 162 RILs, 144 lines were tolerant less than 10%, and 18 lines were susceptible more than 10%. Using the M/G RIL Map, three QTLs associated with the viviparous trait were detected on chromosome 2 (qVG 2-1 and qVG 2-2) and 8 (qVG 8). qVG 2-1 was linked to RM 32D and RZ 166, and had LOD score of 2.97. qVG 2-2 was tightly linked to E13M59.119-Pl and E13M59.M003-P2, and showed higher LOD score of 3.41. qVG 8 was linked to RM33 and TCT116, and had LOD score of 2.67. The total phenotypic variance explained by the three QTLs was about 24.4% of the total variance in the population. The detection of new QTLs associated with VG tolerance will provide important informations for the seed dormancy, low temperature germination, or comparative genetics.