• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1067-1072
• /
• 2008

This paper introduces the RTS method developed by the ASHRAE. In addition, a load calculation program was developed based on the RTS method and then the calculation logic and procedure are explained in detail. The developed program was designed to allow easy and precise predictions of the building load.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.519-524
• /
• 2006

This paper introduces the RTS method developed by the ASHRAE. In addition, a load calculation program was developed based on the RTS method and then the calculation logic and procedure are explained in detail. The developed program was designed to allow easy and precise predictions of the building load.

• 대한산업공학회지
• /
• 제34권2호
• /
• pp.246-254
• /
• 2008

In this paper, a new efficient hidden node detection method is proposed to decide whether the RTS/CTS mechanism is necessary to resolve the hidden node problem for the data transmission of each node in infrastructure mode IEEE 802.11 wireless LANs. The nodes, for which the RTS/CTS mechanism is found to be not necessary by the hidden node detection method, can transmit their data frames without performing the RTS/CTS exchange. Only the nodes, for which the RTS/CTS mechanism is found to be necessary by the hidden node detection method, perform the RTS/CTS exchange before their data frame transmissions.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.531-535
• /
• 2006

Lots of programs and methods for calculating the maximum and dynamic thermal load of building have been developed and used practically. In this paper we calculated heat load in RTS method and compared them with result using TRNSYS in the same test space.

• 한국항행학회논문지
• /
• 제24권6호
• /
• pp.533-539
• /
• 2020

IGS에서 제공하는 RTS (real-time service) 정보는 인터넷으로 GNSS 궤도 및 시계에 대한 실시간 보정값을 제공하므로 실시간 정밀 위치추정에 많이 사용된다. 하지만 인터넷 환경이 불안정한 경우 RTS 신호가 단절될 수 있는데, 주로 다항식을 이용하여 손실된 신호예측을 수행한다. GNSS 항법메시지 IOD (issue of data)가 변화하는 구간에서는 RTS 보정정보도 급격히 변화하여 불연 속성이 증가하고, 신호단절이 발생할 경우 예측이 어려운 문제가 발생한다. 본 연구에서는 IOD 변화에 의한 항법메시지 궤도 차이를 적용하여 연속적인 RTS 보정정보를 생성하는 방법을 제안하였다. 이를 이용하면 RTS 신호손실이 IOD 변화 직후 발생할 경우 예측 성능을 높일 수 있다. RTS 예측성능을 높이기 위한 최적화 연구를 수행한 뒤, 예측된 RTS 궤도정보를 정밀위치결정(PPP; precise point positioning)에 적용하였다. 기존 방법에 비해 위치오차가 상당히 감소하였으며, 신호손실 구간이 길어질수록 위치오차가 급증하는 경향도 감소하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.536-541
• /
• 2006

• Journal of Computing Science and Engineering
• /
• 제8권2호
• /
• pp.107-118
• /
• 2014

One interesting problem regarding wireless local area network (WLAN) ad-hoc networks is the effective mitigation of hidden nodes. The WLAN standard IEEE 802.11 provides request to send/clear to send (RTS/CTS) as mitigation for the hidden node problem; however, this causes the exposed node problem. The first 802.11 standard provided only two transmission rates, 1 and 2 Mbps, and control frames, such as RTS/CTS assumed to be sent at 1 Mbps. The 802.11 standard has been enhanced several times since then and now it supports multi-rate transmission up to 65 Mbps in the currently popular 802.11n (20 MHz channel, single stream with long guard interval). As a result, the difference in transmission rates and coverages between the data frame and control frame can be very large. However adjusting the RTS/CTS transmission rate to optimize network throughput has not been well investigated. In this paper, we propose a method to decrease the number of exposed nodes by increasing the RTS transmission rate to decrease RTS coverage. Our proposed method, Asymmetric Range by Multi-Rate Control (ARMRC), can decrease or even completely eliminate exposed nodes and improve the entire network throughput. Experimental results by simulation show that the network throughput in the proposed method is higher by 20% to 50% under certain conditions, and the proposed method is found to be effective in equalizing dispersion of throughput among nodes.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.209-214
• /
• 2019

Precise point positioning (PPP) requires precise orbit and clock products. International GNSS service (IGS) real-time service (RTS) data can be used in real-time for PPP, but it may not be possible to receive these corrections for a short time due to internet or hardware failure. In addition, the time required for IGS to combine RTS data from each analysis center results in a delay of about 30 seconds for the RTS data. Short-term orbit prediction can be possible because it includes the rate of correction, but the clock correction only provides bias. Thus, a short-term prediction model is needed to preidict RTS clock corrections. In this paper, we used a long short-term memory (LSTM) network to predict RTS clock correction for three minutes. The prediction accuracy of the LSTM was compared with that of the polynomial model. After applying the predicted clock corrections to the broadcast ephemeris, we performed PPP and analyzed the positioning accuracy. The LSTM network predicted the clock correction within 2 cm error, and the PPP accuracy is almost the same as received RTS data.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.250-250
• /
• 2010

The random telegraph signal (RTS) for the NOR flash cell scaling is investigated. An innovative method to suppress the RTS, based on the device engineering, is proposed. By optimizing the channel doping profile and using the high-k tunnel dielectric, it is confirmed from three-dimensional (3-D) simulation, that the $V_{th}$ amplitude, dueto RTS, is significantly suppressed, from approximately 0.5 to 0.07 V in the middle of the channel at 45 nm NOR Flash technology. From this result, it is expected that the proposed method to suppress the RTS amplitude is essential for further cell size scaling in Flash memory.

• 한국인터넷방송통신학회논문지
• /
• 제14권2호
• /
• pp.93-100
• /
• 2014

IEEE 802.11 무선 LAN MAC 계층의 경쟁 기반 데이터 전송 방식에는 DCF 기본 전송 방식과 RTS/CTS 전송 방식이 있다. RTS/CTS 전송은 Hidden Terminal 문제를 해결하기 위한 방식이지만 네트워크 환경에 따라 정상 상태에서 기본 전송 방식보다 향상된 성능을 보이기도 한다. 본 논문에서는 무선 채널의 전송 충돌 확률을 수치적으로 해석하고 이를 실제 전송 파라미터에 적용하여 두 전송 방식의 성능에 차이를 보이는 기준 충돌 확률 값을 구하였다. 또한 전송 패킷의 컨트롤 신호 속도가 전체 네트워크 성능에 커다란 영향을 미치는 것을 확인하고 이를 충돌 확률, 스테이션의 수, 그리고 Backoff 동작 시 Contention Window Size를 고려하여 두 전송 방식의 성능을 분석하였다.