• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.424-431
• /
• 2017

These days land vehicle navigation system is a subject of great interest. The GNSS(Global Navigation Satellite System) is the most popular technology for out door positioning. However, The GNSS is incapable of providing high accuracy and reliable positioning. For that reason, we applied Network-RTK in vehicle to improve the accuracy of GNSS performance. In this network-RTK mode, the GNSS error are significantly decreased. In this paper, we explain ntrip client program for network-RTK mode and show the result of experiments in various environments.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.1-11
• /
• 2010

Since January 2009, Seoul Metro Government(SMG) is operating own Network RTK Systems connecting four(4) GNSS Reference Stations which are installed inside Seoul Metro City area. SMG is currently providing VRS data service via wireless internet for Network-RTK and RINEX data observed from GNSS Reference Stations. This paper will discuss utilization of data available from SMG Network-RTK System for various applications, and present the test results on practicalities of Virtual RINEX data. For the utilization of data available from SMG Network- RTK system, 1)NTRIP data delivery of GNSS realtime observables streaming and converting to RINEX at receiving side, 2) monitoring deformation of bulky structures using GNSS observation were discussed. In addition to those discussion, 3) broadcasting VRS correction data for job site via radio modem after acquiring such correction data on-line using NTRIP based GNSS Internet Radio from SMG Network-RTK System were introduced. For the test results on practicalities of Virtual RINEX data, 1) the post-processing results of the GNSS observation data on a certain point with GNSS Reference Station data have been compared to the post-processing results of Virtual RINEX data on the same point generated from SMG Network-RTK System, and 2) VRS RTK positioning results for a certain point and post-processing results of Virtual RINEX data for the point were compared. The results showed only a few mm difference, and the high possibility for using Virtual RINEX data for post-processing applications.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.53-65
• /
• 2022

According to the advancement of the GNSS satellite positioning system, the module of hardware and operation software reflecting accuracy and economical efficiency is implemented in the user sector including the multi-channel GNSS receiver, the multi-frequency external antenna and the mobile app (App) base public positioning analysis software etc., and the multichannel GNSS RTK positioning of the active configuration method (DIY, Do it yourself) is possible according to the purpose of user. Especially, as the infrastructure of multi-GNSS satellite is expanded and the potential of expansion of utilization according to various modules is highlighted, interest in the utilization of multi-channel low-cost GNSS receiver module is gradually increasing. The purpose of this study is to review the multi-channel low-cost GNSS receivers that are appearing in the mass market in various forms and to analyze the utilization plan of the "address information facility investigation project" of the Ministry of Public Administration and Security by constructing the multi-channel low-cost GNSS positioning module based RTK survey system (hereinafter referred to as "multi-channel GNSS RTK module positioning system"). For this purpose, we constructed a low-cost "multi-channel GNSS RTK module positioning system" by combining related modules such as U-blox's F9P chipset, antenna, Ntrip transmission of GNSS observation data and RTK positioning analysis app through smartphone. Kinematic positioning was performed for circular trajectories, and static positioning was performed for address information facilities. The results of comparative analysis with the Static positioning performance of the geodetic receivers were obtained with 5 fixed points in the experimental site, and the good static surveying performance was obtained with the standard deviation of average ±1.2cm. In addition, the results of the test point for the outline of the circular structure in the orthogonal image composed of the drone image analysis and the Kinematic positioning trajectory of the low cost RTK GNSS receiver showed that the trajectory was very close to the standard deviation of average ±2.5cm. Especially, as a result of applying it to address information facilities, it was possible to verify the utility of spatial information construction at low cost compared to expensive commercial geodetic receivers, so it is expected that various utilization of "multi-channel GNSS RTK module positioning system"

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.127-133
• /
• 2014

The purpose of this study is to evaluate the accuracy of Network-RTK(VRS) survey for applying to Ground Control Points(GCPs) survey required for mapping aerial photographs. Network-RTK has been serviced by National Geographic Information Institute since 2007. On the basis of the global coordinates system(ITRF2000), the coordinates of GCPs determined by Static GNSS survey with relative positioning techniques were regarded as accurate values. The coordinates of GCPs were also determined by Network-RTK survey using two kinds of receivers, and then they were converted into the global coordinates system(ITRF2000) by applying suitable geoid model and coordinate transformation. These coordinates of GCPs were compared with those from Static GNSS survey. The root mean squares error (RMSE) of coordinate differences between Network-RTK and Static GNSS was ${\pm}2.0cm$ in plane and ${\pm}7.0cm$ in height. Therefore, Network-RTK survey that enables single GNSS receiver to measure positions in short time is a practical alternative in positioning GCPs to either RTK survey that uses more than two sets of GNSS receivers or Static GNSS survey that requires longer observation time.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2009.04a
• /
• pp.293-294
• /
• 2009

정밀한 관측을 요하는 측량장비의 기능을 보정하거나 검증하는 것은 측량시 매우 중요한 일이다. ISO17123-8 규격은 GNSS RTK 정확도를 결정 할 때 사용되는 야외실험 절차와 규정을 명시하고 있으며 정확도 평가방법으로는 약식시험절차와 엄밀시험절차를 제시하고 있다. 본 연구에서는 GNSS RTK 정확도 평가방법 중 엄밀시험절차에 대해 시험할 목적으로 GNSS RTK 규격에 따라 Test-bed를 구축하였고 성능실험을 실시 위하여 GNSS RTK 규격에 제시된 정확도 평가방법을 적용하였다.

• Journal of Positioning, Navigation, and Timing
• /
• v.10 no.4
• /
• pp.243-251
• /
• 2021

Real-Time Kinematic (RTK) is a phase-based differential GNSS technique and uses additional observations from permanent reference stations to mitigate or eliminate effects like atmospheric delays or satellite clocks and orbit errors. In particular, as the position accuracy required in the fields of autonomous vehicles and drones is gradually increasing, the demand for RTK-based precise navigation that can provide cm-level position is increasing. Recently, with the rapid growth of the open-source software market, the use of open-source software for building navigation system of unmanned vehicles, which is difficult to mount an expensive GNSS receivers, is gradually increasing. RTKLIB is an open-source software package that can perform RTK positioning and is widely used for research and education purposes. However, since the performance and stability of RTK algorithm of RTKLIB is inevitably inferior to that of commercial GNSS receivers, users need to verify whether RTKLIB can satisfy the navigation performance requirements of unmanned vehicles. Therefore, in this paper, the performance evaluation of the RTK positioning algorithm of RTKLIB was performed using GNSS observation data acquired in a dynamic environment. Therefore, in this paper, the RTK positioning performance of RTKLIB was evaluated using GNSS observation data acquired in a dynamic environment. Our results show that the current RTK algorithm of RTKLIB is not suitable for precise navigation of unmanned vehicles.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.2
• /
• pp.87-94
• /
• 2019

The Global Navigation Satellite System (GNSS) Real-Time Kinematic (RTK) positioning has been widely used in geodesy, surveying, and navigation fields. RTK can benefit enormously from the integration of multi-GNSS. In this study, we develop a GPS/BeiDou Navigation Satellite System (BDS) RTK integration algorithm for long baselines ranging from 128 km to 335 km in South Korea. The positioning performance with GPS/BDS RTK, GPS-only RTK, and BDS-only RTK is compared in terms of the positioning accuracy. An improvement of positioning accuracy over long baselines can be found with GPS/BDS RTK compared with that of GPS-only RTK and that of BDS-only RTK. The positioning accuracy of GPS/BDS RTK is better than 2 cm in the horizontal direction and better than 5 cm in the vertical direction. A lower Relative Dilution of Precision (RDOP) value with GPS/BDS integration can obtain a better positional precision for long baseline RTK positioning.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.4
• /
• pp.333-342
• /
• 2022

This paper has theoretically and practically reviewed the ISO (International Standard Organization) 17123-8 standard not only to raise the appropriateness for introducing performance criteria of GNSS (Global Navigation Satellite Systems) surveying equipment based on RTK (Real-Time Kinematic) accuracy but also to derive its proper test procedure by introducing the international standard. Field experiments have been performed to appreciate the GNSS-RTK accuracy of five selected receivers via the full testing procedure of the ISO standard, which statistically compares the so-called experimental standard deviations with themselves and with the reference accuracy. A series of statistical tests have revealed that the RTK accuracy of the same class receivers is not identical, whereas that of the different classes can be equivalent. Such a result evidences the urgency of adopting an RTK accuracy-based specification of the GNSS equipment to the performance standard, currently referenced to the static observation technique only. It is believed that this transition helps the maximization of a new generation of cost-effective receivers to legal surveying applications. Finally, this study proposes the ISO full test, comparing an experimental standard deviation with its referenced value, for a potential field verification procedure of the new performance standard.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.200-209
• /
• 2022

Providing real-time location information is emerging as a major goal of the national industry. In order to provide such real-time location information (3D spatial information), it is essential to develop a technology for a satellite positioning method. Therefore, the country continues to make efforts to increase satisfaction with the needs of consumers by introducing the Network RTK GNSS method. In this study, among the Network RKT GNSS(Global Navigation Satellite System) methods provided by the National Geographic Information Service, continuous observation and single observation were measured at the integrated reference point using VRS(Virtual Reference Station) and FKP(Flӓachen-Korrektur Parameter) to evaluate accuracy. In addition, we aim to maximize efficiency by presenting accuracy on the rapidly increasing Network RTK GNSS method in the field.

• Journal of Positioning, Navigation, and Timing
• /
• v.11 no.4
• /
• pp.351-360
• /
• 2022

Autonomous vehicles require precise knowledge of their position, velocity and orientation in all weather and traffic conditions in any time. And, these information is effectively used for path planning, perception, and control that are key factors for safety of vehicle driving. For this purpose, a high precision GNSS technology is widely adopted in autonomous vehicles as a core localization and navigation method. However, due to the lack of infrastructure as well as cost issue regarding GNSS correction data communication, only a few high precision GNSS technology will be available for future commercial autonomous vehicles. Recently, a high precision GNSS sensor that is based on a Broadcast-RTK system to dramatically reduce network maintenance cost by utilizing the existing broadcasting network is released. In this paper, we present the performance test result of the broadcast-RTK-based commercial high precision GNSS receiver to test the feasibility of the system for autonomous driving in Korea. Massive measurement campaigns covering of Korea region were performed, and the obtained measurements were analyzed in terms of ambiguity fixing rate, integer ambiguity loss recovery, time to retry ambiguity fixing, average correction information update rate as well as accuracy in comparison to other high precision systems.