• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.139-147
• /
• 2008

The positioning accuracies tend to deteriorate as the distance between the rover and the reference station increases in the Real-Time Kinematic (RTK) surveys using Global Positioning System (GPS). To solve this problem, the National Geographic Information Institute (NGII) of Korea has installed Virtual Reference System (VRS), which is one of the network-based RTK systems. In this study, we conducted the accuracy tests of the VRS-RTK surveys. We surveyed 50 control points inside the NGII's GPS Continuously Operating Reference Stations (CORS) network using the VRS-RTK system, and compared the results with the published coordinates to verify the positioning accuracies. We also conducted the general RTK surveys at the same control points. The results showed that the positioning accuracy of the VRS-RTK was comparable to that of the general RTK, because the horizontal positioning accuracy was 3.1 cm while that of general RTK was 2.0 cm. Also the vertical positioning accuracy of VRS-RTK was 6.8 cm.

• Journal of Cadastre & Land InformatiX
• /
• v.45 no.1
• /
• pp.181-191
• /
• 2015

In the present study, the 2013 survey Uiwang pointed out how the Resurvey of Cadastre ed projects reviewed relation to the business carried GPS-RTK (Network, Single) and total station surveying (T/S) to analyze and to compare the performance of Time Measurement Accuracy urban areas Resurvey of Cadastre was to present an effective survey methods in the business district. In this study, Uiwang review survey results indicated a comprehensive evaluation of the results, which are concentrated in urban areas, the building of intelligent review of GPS-RTK surveying methods is avoided by the measurement method to establish the first principles method based on total station surveying the GPS-RTK survey to draw conclusions appropriated to take advantage of the assistance and inspection methods.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.99-107
• /
• 2013

With the expansion of the development and use of surveying equipment recently, by the establishment of infrastructure for network RTK surveying of the NGII, network RTK surveying has been widely used in surveying industry. Currently, in public surveying regulations, site calibration with minimum 5 evenly spaced bench marks is needed for using network RTK surveying results as leveling. But the range between and the number of bench marks for site calibration can be varied according to the geoid undulation. In this study, in order to verify this, Incheon area having regular geoid undulation and Taebaek area having irregular geoid undulation are selected as study area and network RTK surveying have been done. Then the accuracy of site calibration by range between and the number of bench marks have been compared. As a result of this study, in order to meet a tolerance of vertical precision (0.1m) that has been set in public surveying regulations, there is a necessity for improving the regulations so that the range and number of bench marks, to be used for site calibration of network RTK surveying, can be applied complementarily.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.39-46
• /
• 2014

Network RTK GNSS positioning technique which has been developed to overcome the limitation of Single reference station RTK is used widely in the field of general surveying, cadastre surveying and engineering surveying due to the high accuracy and efficiency. It is specified Network RTK, Single reference station RTK and Static of GNSS as a surveying method in the regulation of Cadastre Re-survey Surveying. In this study, Network RTK and Static GNSS surveying were accomplished at cadastral re-survey field in Hadong, Gyeongnam and the surveying results were compared. Also, to analyze the performance of site calibration in Network RTK surveying, two types of Network RTK surveying with and without site calibration were accomplished and the results was compared. The research result shows that average positioning error between Network RTK(VRS) without site calibration and Static surveying result is 2.44cm and 1.53cm respectively and average positioning error between Network RTK(VRS) with site calibration and Static surveying result is 0.19cm and 0.82cm respectively at two zone. So, it was proved the effect of calibration in network RTK(VRS) surveying.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.625-631
• /
• 2008

Correct evaluation of cut and fill volume of soil is one of the most important factors which controls construction cost in enormous construction sites. To achieve accurate computation of soil volume in construction site precise surveying is required, however most of construction sites adopt existing optical surveying instruments such as Total Station. The problem when using these optical instruments in construction sites is that these instruments take longer time in data acquisition. Due to insufficiency of computation time accurate and precise observation cannot be accomplished with these equipments. As a result roughly calculated earthwork volume may cause arguments between contractors and supervisors in the matter of reduction or increasement of total construction cost. In this study VRS-RTK Surveying is adopted to perform fast and accurate in-situ surveying for rapid computation of soil volume. This VRS-RTK Surveying system is proved to have more accurate three dimensional coordinates with high density and better economical solution with less manpower.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.37-42
• /
• 2009

The accuracy of RTK GPS is limited by the distance dependent errors from orbit, ionosphere and troposphere, as the distance between the rover and the base station increases in the Real Time Kinematic surveying. To solve this problem, VRS system has installed. This study would estimated the accuracy of cadastral detail surveying, which is used on the VRS RTK instead of Total Station and RTK GPS demand for various equipments and time. As a result of study, the positioning accuracy of the VRS RTK and RTK GPS surveying make no greate difference, as RMSE of VRS RTK surveying is 0.144m and that of RTK GPS surveying is 0.146m and the new method would be more efficient.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.1
• /
• pp.89-95
• /
• 2009

The accuracy and efficiency of RTK-GPS is proved through its measurement, but it is not used in cadastral detail surveying, due to low accuracy caused by the trouble of satellite reception in a built-up area and lack of detailed guidelines for practical application. Thus, this study tries to offer detailed directions for the practical use of RTK-GPS by analyzing the application problem of RTK-GPS measurement. As results of the study, for the practical use of RTK-GPS it suggests enactment of regulations, connection of practical RTK-GPS measurement with the existing detail surveying methods, introduction of a VRS method for increasing the arrangement density of reference stations, and integrated use of GPS, GLONASS and Galileo satellites for securing accuracy and stability.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.4
• /
• pp.117-123
• /
• 2013

The purpose of this research is to suggest the reasonable method of Network RTK surveying in future cadastral re-survey project through the accuracy analysis about Network RTK surveying achievement and the conventional TS-based confirmation surveying. To achieve it, we selected the experiment places and succeeded in achieving the result by Network RTK surveying about total of 307 parcel boundary point. We compared it with the result of confirmation surveying for cadastral, and it was shown that total connection errors of RMSE was ${\pm}0.1028m$ and total 48 places exceeded in the cadastral re-survey allowable error tolerance. The research suggested the practical alternatives in cadastral re-survey project after the comprehensive evaluation of those analysis results. Therefore, the author suggested development and adoptation of integrated electronic plane table surveying method. Moreover, we suggested unifying the first parcel boundary point method into the total station surveying and adopt the Network RTK surveying on the cadastral surveying inspection.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.95-110
• /
• 2017

The network RTK surveying has been widely used in the field of cadastral surveys in recent years, and its use is gradually expanding. As a result of the implementation of GPS static surveys by civilian companies in accordance with the progress of the cadastral surveys and gradual civilian transfer plans and cadastral surveys, there has been an increase in the number of civilian companies performing surveys. In this paper, we describe the process of applying the results of analysis of conformity using the network RTK site calibration function on the local coordinate system to the GPS static surveying of the cadastral reference points in Anyang city. In addition, the measurement results of the network RTK site calibration function and the results of the GPS static surveying network reconciliation in the local coordinate system were compared, and the performance was determined within 0.04m maximum of RMSE(Root Mean Square Error), and further study on the application method is needed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.3
• /
• pp.267-275
• /
• 2007

Nowadays, it grows bigger the importance of water resource management, and so, hydrographic surveying technology in river is important because it serves basic data about river environment. And, also, the application field of GPS has been increased and expected to be more increased because of the change of the geodetic reference system to World Geodetic System. In this study, hydrographic surveying in Hwang river in Geochang is accomplished by RTK GPS and Total Station and they are compared and analyzed the both results. The section profile in river is made by Hec-Ras program and CAD. The results show it can be saved 15.3% in surveying times and the amount of surveying works can be enlarged 42.5%. And the standard error between RTK results with calibration and the results without calibration turned out as 2.1 cm. So we have a conclusion that RTK GPS is more efficient surveying method than total station in hydrographic surveying in river.