• Journal of Korean Neurosurgical Society
• /
• v.64 no.5
• /
• pp.740-750
• /
• 2021

Objective : Retrograde suction decompression (RSD) is an adjuvant technique used for the microsurgical treatment of large and giant internal carotid artery (ICA) aneurysms. In this study, we analyzed the efficacy and safety of the RSD technique for the treatment of large and giant ICA aneurysms relative to other conventional microsurgical techniques. Methods : The aneurysms were classified into two groups depending on whether the RSD method was used (21 in the RSD group vs. 43 in the non-RSD group). Baseline characteristics, details of the surgical procedure, angiographic outcomes, clinical outcomes, and procedure-related complications of each group were reviewed retrospectively. Results : There was no significant difference in the rates of complete neck-clipping between the RSD (57.1%) and non-RSD (67.4%) groups. Similarly, there was no difference in the rates of good clinical outcomes (modified Rankin Scale score, 0-2) between the RSD (85.7%) and non-RSD (81.4%) groups. Considering the initial functional status, 19 of 21 (90.5%) patients in the RSD group and 35 of 43 (81.4%) patients in the non-RSD group showed an improvement or no change in functional status, which did not reach statistical significance. Conclusion : In this study, the microsurgical treatment of large and giant intracranial ICA aneurysms using the RSD technique obtained competitive angiographic and clinical outcomes without increasing the risk of procedure-related complications. The RSD technique might be a useful technical option for the microsurgical treatment of large and giant intracranial ICA aneurysms.

• Journal of the Korean Society of Radiology
• /
• v.15 no.7
• /
• pp.1049-1056
• /
• 2021

The purpose of this study was to develop a respiratory synchronization device for X-ray (X-RSD) to increase the reproducibility of inspiration when examining the Chest X-ray of a patient who difficulty in breathing coordination. The X-RSD was self-made using an air pressure sensor and air was injected by connecting a ventilator to the mannequin for CPR. At this time, the amount of injected air was quantified using the SkillReporting device. After placing the X-RSD on the chest of the mannequin, the amount of air was tested in 6 steps from 200 to 700 cc by 100 cc increased. For the accuracy evaluation, the sensitivity of X-RSD was measured by repeating a total of 80 measurements, and the sensitivity was 100%, and very precise results were obtained. After that, the images examined while viewing the X-RSD of the chest lateral examination and the images obtained by the blind examination were compared and evaluated. The lung volume of X-RSD was larger than that of the blind test, and the deviation was smaller. Overall, the use of X-RSD can help with chest X-ray examination of patients who have difficulty in cooperating, and it is thought that it will be possible to contribute to the reduction of exposure dose by reducing the repeat rate of general X-ray examinations.

• Journal of Nutrition and Health
• /
• v.33 no.8
• /
• pp.802-812
• /
• 2000

The purpose of this study was to examine the effect of resistant starch(RS) in hyperchlesterolemia and colon cancer. The subjects of this study was eight college women participating in the general starch diet(GSD) period for 5 days and resistant starch diet(RSD) period for 7 days. RSD contains 30g or the RS. On the last day of each program blood were collected. And for the last 3 days of each diet period, the amount of all the food consumed by the subjects and feces were collected. Food was measured to determine and compared the energy, protein and fat intakes. The amount of total cholesterol, HDL-cholesterol, LDL-cholesterol and volatile fatty acids in plasma and the amounts of bile acids in feces were measured by gas chromatography. The results obtained were as follows, Daily energy intake was higher in the RSD compared with the GSD, Protein and fat intakes were lower in the RSD compared with the compared with the GSD. Volatile fatty acid contents in plasma, the amounts of acetic acid, propionic acid and valeric acid were higher in the RSD compared with the GSD. The amounts of bile acids in feces, cholic acid, chenodeoxycholic acid and lithocholic acid were higher in the RSD compared with the GSD, But the amount of deoxycholic acid n the RSD period was significantly low. Secondary/primary ratios of bile acids was lower in the RSD compared with GSD, respectively. We speculate that , RS consumption decreases colonic mucosal proliferation as a result of the decreased formation of cytotoxic secondary bile acids. Thus, RS intakes may contribute the prevention of heart disease and colon cancer in humans. (Korean J Nutrition 33(8) : 802-812, 2000)

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.169-172
• /
• 2004

펄스파워 응용기술에 있어서 핵심이 되는 것은 대전력 고반복율의 스위칭 특성을 갖는 스위치 및 구동기술이다. 지금까지 대전력 에너지를 전달하기 위해 사용되고 있는 스위치는 크게 사이라트론 등과 같은 진공 스위치와 자기 스위치, 그리고 반도체 스위치로 구분할 수 있는데 이중에서 기존 반도체 스위치들의 한계를 극복하고 낮은 제작비용으로 대전력 고반복용 펄스 전원 장치 등의 다양한 산업분야에 활용하고자 개발된 반도체 스위치가 바로 RSD (Reverse Switch-on Dynistor)이다. RSD는 애벌런치 전류에 의해 소자 전체를 동시에 턴온시키는 특성이 있으므로 고전압 적용을 위해서 직렬 스택을 구성하는 경우에도 턴온 지연이 거의 없어서 전압 분배기와 같은 추가적인 장치가 필요 없으며 높은 di/dt 특성과 우수한 펄스 통전능력을 가진다. 본 논문에서는 30${\mu}s$의 펄스폭으로 스위칭 할 수 있는 10kV 20kA급 펄스파워용 RSD 스택 시스템의 설계와 실험결과를 보여 주고 있다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.528-532
• /
• 2006

In the aerospace industry, Cold expansion has been used the most important method that is retarded of crack initiation from fastener hole surface. Cold expansion method(CEM) is that a oversized tapered mandrel goes through the hole in order to develop a compressive residual stress as the passing of the mandrel around the hole. Therefore, because of characteristic of mandrel inserting, Residual Stress Distributions (RSD) are differently generated form Entry, Mid and Exit position of the plate. Also, it is respected that RSD are changed as distances between holes. In this paper, It is performed a FE analysis of RSD by CEM and it is respectively shown RSD in the Entry, Mid and Exit position. It is compared residual stress results form the cold expansion in these two cases: the concurrent CEM and the sequential CEM. From this research, it has been found that compressive residual stress of Entry position is lower than other positions. Also, the concurrent CE of adjacent holes leads to much higher compressive residual stress than the sequential CE. In addition, in the sequential CE case, a compressive RSD of 1 step's hole around is lower than compressive RSD of 2 step's hole around.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.53-59
• /
• 2005

Reference Standard Data(RSD), which is a very high data of reliability, an authentic data of quality, can be used repetitively in industry, science and technology field. The more RSD is produced and used in various field, the more the level of detail of industry goods and reliability of material rise. It is also the nationally important information resource that improve the technology level of nation and international competitiveness. Before constructing RSD, this paper is used of the source data that recommend RSD's development direction and higher required RSD after we investigate what kind of RSD domestic users require in some field.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.81-87
• /
• 1994

This paper proposes a divider structure that combines a carry-propagation-free division algorithm using RSD number system and a self-timed ring structure. The self-timed ring structure enables the divider to compute at a speed comparable to that of combinational array dividers with less silicon area. By exploiting the carry-propagation-free division algorithm, we can achieve further reduction of silicon area and computation time. The algorithm and structure of the proposed divider have been successfully verified through VHDL modeling and simulation. Preliminary experimental results show the effectiveness of the algorithm and structure.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.112-115
• /
• 2010

본 논문은 그림 1과 같은 네트워크 환경에서 두 송신단이 LT code를 오류정정 부호로 사용할 때, 두 송신단이 생성하는 인코딩 심볼과 수신단이 수신하는 인코딩 심볼들의 degree distribution의 관계에 대해 다룬다. LT code를 복호하기 위해 belief propagation 방법을 사용했을 때, 수신단이 받은 인코딩 심볼들의 degree distribution은 robust soliton distribution(RSD)을 따를 때, overhead 대비 가장 높은 확률로 복호에 성공한다. 하지만 그림 1과 같은 네트워크 환경에서, 두 송신단 모두 RSD에 따라 인코딩 심볼을 생성하여 송신하면, 수신단에서 수신한 심볼은 RSD를 따르지 않는다. 본 논문은 한 송신단($S_1$) 이 생성하는 인코딩 심볼의 degree distribution을 알 때, 수신단에서의 인코딩 심볼의 분포가 근사적으로 RSD를 따르도록 하는 또 다른 송신단($S_2$)에서의 degree distribution을 구하는 방법을 제시한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.275-277
• /
• 2011

손실 채널의 데이터 손실을 보상하는 오류 정정 부호로 주로 사용되는 LT 부호는 일반적으로 RSD (robust soliton distribution)을 따르는 nonsystematic 구조를 가진다. RSD 를 따르는 유한한 길이의 LT 부호의 경우 높은 손실률 가진 채널 환경에서는 적합하지 않다. 본 논문은 기존의 RSD 를 다소 변형하여 systematic LT 부호에 적합한 무게 분포를 설계 방법을 제시하고, 시뮬레이션을 통해 기존의 RSD 를 이용한 LT 부호와 논문에서 제안하는 systematic 성질을 가진 LT 부호의 성능을 비교해 본다.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.39.1-39.1
• /
• 2016

The cosmic distance can be precisely determined using a 'standard ruler' imprinted by primordial baryon acoustic oscillation (hereafter BAO) in the early Universe. The BAO at the targeted epoch is observed by analyzing galaxy clustering in redshift space (hereafter RSD) of which theoretical formulation is not yet fully understood, and thus makes this methodology unsatisfactory. The BAO analysis through full RSD modeling is contaminated by the systematic uncertainty due to a non--linear smearing effect such as non-linear corrections and uncertainty caused by random viral velocity of galaxies. However, BAO can be probed independently of RSD contamination using the BAO peak positions located in the 2D anisotropic correlation function. A new methodology is presented to measure peak positions, to test whether it is also contaminated by the same systematics in RSD, and to provide the radial and transverse cosmic distances determined by the 2D BAO peak positions. We find that in our model independent anisotropic clustering analysis we can obtain about 2% and 5% constraints on $D_A$ and $H^{-1}$ respectively with current BOSS data which is competitive with other analysis.