• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.281-284
• /
• 2006

최근 산업용 내장형 소프트웨어는 높은 부가가치를 창출할 수 있는 분야로 각광을 받고 있다. 최근 산업용 기기의 하드웨어뿐 아니라 내장형 소프트웨어에 대한 품질 시험 및 인증을 위한 기반 연구가 활발히 수행되고 있다. 본 연구는 산업용 소프트웨어 국제표준 적합성 인증」사업 추진과 관련하여 산업용 소프트웨어의 통신 기능에 대한 성능 평가 시험을 위하여 다양한 통신 프로토콜을 지원하는 시뮬레이션 소프트웨어를 개발한 것이다 소프트웨어는 산업용 통신 프로토콜인 필드버스 방식(Profibus, DeviceNet, CAN, RS232C, RS485, RS422등) 및 이더넷 기반의 TCP/IP 프로토콜에 대한 통신 시뮬레이션 시험 기능을 가지고 있으며, 프로토콜별 패킷 프레임을 사용자가 임의적으로 설정할 수 있게 하여 다양한 통신환경에서의 시뮬레이션 시험을 지원하고 각 프로토콜은 단방향 및 양방향시험을 모두 지원한다. 본 논문에서는 프로토콜별 시험 항목 및 방법을 소개하고 시뮬레이선 시스템의 하드웨어와 소프트웨어 구성 및 운영환경을 기술하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1989.10a
• /
• pp.290-295
• /
• 1989

This paper proposes a Expert CAPP System for integrating CAD/CAM of rotational work-part by rule based approach. The CAD/CAPP integration is performed by the recognition of machined features from the 2-D CAD data (IGES) file. Selecting functions of the process planning are performed in modularized rule base by forward chaining inference, and operation sequences are determined by means of heuristic search algorithm. For CAPP/CAM integration, post-processor generates NC code from route sheet file. This system coded in OPS5 and C language on PC/AT, and EMCO CNC lathe interfaced with PC through DNC and RS-232C.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.552-555
• /
• 2000

본 연구에서는 수직순환식 기계식입체주차설비용 주 구동전도기인 유도전동기를 제어할 수 있는 인버터와 컨버터를 일체화한 165kVA급 인버터장치와 통합 시퀀스제어 및 보조 장치용 전도기 제어를 위한 목적으로 PLC형 제어반을 구성하였고 사용자와의 MMI개선을 위한 목적으로 Pro-Face 터치스크린을 적용한 운전반을 구성하였다 주 구동장치의 제어를 위한 인버터반은 인버터부와 컨버터부 및 입출력부로 구성하였으며 인버터반 내의 제어장치는 병렬통신처리를 하였고 인버터반과 PLC형 제어반 사이는 RS-232C방식 통신체계를 갖추도록 하였다 터치스크린형 운전반과 PLC형 제어반은 RS-422 통신기능을 갖는 C-Net 카드를 적용 하였으며 실험은 55kW급 유도전동기를 대상으로 하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.281-284
• /
• 2008

This paper describes ASIC design of multimedia SoC Platform. The implemented Platform consists of 32-bit OpenRISC1200 Microprocessor, WISHBONE on-chip bus, VGA Controller, Debug Interface, SRAM Interface and UART. The 32-bit OpenRISC1200 processor has 5 stage pipeline and Harvard architecture with separated instruction/data bus. The VGA Controller can display RCB data on a CRT or LCD monitor. The Debug Interface supports a debugging function for the Platform. The SRAM Interface supports 18-bit address bus and 32-bit data bus. The UART provides RS232 protocol, which supports serial communication function. The Platform is design and verified on a Xilinx VERTEX-4 XC4VLX80 FPGA board. Test code is generated by a cross compiler' and JTAG utility software and gdb are used to download the test code to the FPGA board through parallel cable. Finally, the Platform is implemented into a single ASIC chip using Chatered 0.18um process and it can operate at 100MHz clock frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.179-182
• /
• 2003

This study is about the development of a system related to the CATV network. It intends to develop an automatically centralized Headend system and a distributive system to remove the ineffectiveness of the established manual system. To achieve this goal, we took a part of bandwidth, which is not used for the transmission of video signals in the established frequency bandwidth, and used it for the transmission and receiver and a automatic distributive system. We developed an information management system for the 9600bps CATV using RS-232 of forward/backward communication and backward communication. Based on window, It consist of ID generation, transmitter/receiver, control and backup part.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1082-1088
• /
• 2003

This study is about the development of a system related to the CATV network. It intends to develop an automatically centralized Headend system and a distributive system to remove the ineffectiveness of the established manual system. To achieve this goal, we took a put of bandwidth, which is not used for the transmission of video signals in the established frequency bandwidth, and used it for the transmission and receiver of controlling signals. By this way we could design a system of transmission and receiver and a automatic distributive system. We developed an information management system for the 9600bps CATV using RS-232 of forward/backward communication and backward communication. Based on window, It consist of ID generation, transmitter/receiver, control and backup part.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.11
• /
• pp.63-70
• /
• 2008

In this paper, a smart sensor system for the MEMS pressure sensor was developed. A compensation algorithm and programmable calibration circuits were presented to eliminate errors caused by temperature drift of piezoresistive pressure sensors in itself. This system consisted of signal conditioning, calibration, temperature detection, microprocessor, and communication parts and these were integrated into a SOC. A RS-232 interface was employed for monitoring and control of a smart sensor system. The area of fabricated IC is $4.38{\times}3.78\;mm^2$ and a $0.35{\mu}m$ high voltage CMOS process was used. Compensation error for temperature drift of 50 KPa pressure sensors was measured into ${\pm}0.48%$ in the range of $-40^{\circ}C{\sim}150^{\circ}C$. Total power consumption was 30.5 mW.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.333-340
• /
• 1994

Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16 MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with two complete blood count analyzers (Sysmex WE-8000 and Coulter STKS) for unidirectional data transmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.3
• /
• pp.302-308
• /
• 2011

The HVAC(Heating Ventilation and Air Conditioning) system is only controlled by turn on/turn off operations with AC 380V input. Therefore, the efficiency of the system is reduced and accoustic noise problem occurs. Also, the blower is shut down at the AC power failure. In this paper, the inverter system with UPS function for the A/C(Air Conditioning) blower is proposed. Proposed inverter system which is powered from the AC and DC voltage can control speed, operation mode, and soft-start time using CAN communication. In case of the CAN communication failure, RS-232 communication could be used to control the hardware directly by the engineer that can solve existing problems. To verify the validity of proposed inverter system, simulations and experiments are carried out.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.106-111
• /
• 2002

The object of this study is a manufacture of burr die using CAD/CAM systems. Systems are consist of AutoCAD, CAM software and CNC milling machine. CAM software is purpose of G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.