• Journal of Advanced Navigation Technology
• /
• v.16 no.4
• /
• pp.619-626
• /
• 2012

One-way Network-RTK(Real Time Kinematics) is considered as a method which can satisfy moving vehicle's recently-required high accuracy and mobility. When we use one-way Network RTK for vehicle navigation, multiple cells-based system is required to provide the service continuously in wide area. The rover which moves through various cells inevitably experiences a correction discontinuity, which is not eliminated by the DD(Double Difference) method and to cause 13cm(horizontal) and 48cm(vertical) position error. We suggest three solutions to reduce this discontinuity, which are identification of master RS with neighbor networks, duplication of communication module to receive corrections from other cells, and ambiguity adjustment between neighbor cells. All of our suggestions reduce the error to 1/4 wavelength in measurement and 3cm in position-domain, and we suggest the ambiguity adjustment is the best when we consider the extendibility of service area and the cost of rover device.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.2
• /
• pp.133-140
• /
• 2007

In this study we did the monitor the change of a urban land coverage to forecast and to deal with various city problems according to urban development. The amount of change of a land coverage used the landsat satellite image and was calculated by analyzing the situation and the distribution aspect of land cover of the road circumstance by time series. We interpreted two images which are taken picture different time and calculated the amount of the area change through integration of the spatial analysis technique of remote sensing and GIS for this study. We could create the development model of the urban area by continuous analysis of satellite and geographic data.

• Journal of Chest Surgery
• /
• v.17 no.1
• /
• pp.32-40
• /
• 1984

During the past six years from July 1977 to June 1983, fifteen adult patients of patent ductus arteriosus were surgically treated. The results were as follows: 1. Of the 15 patients, their age range was 17 to 34 years with a mean of 24 years, and sexual predominance was women [9. cf. 6 men]. 2. The most common symptom showed exertional dyspnea, and 10 patients were classed in NYHA class II, the rest were all class III. 3. On physical examination, all patients were auscultated continuous murmur, but concomitantly diastolic murmur was noted apical region in 2 patients. 4. On roentgenogram of chest, normal finding was 3 patients, and the other patients were revealed the evidence of pulmonary congestion. 5. The electrocardiogram was normal in 6 patients, but LVH was seen in 5, and 2 patients were LVH+ LAH. 6. Cardiac catheterization was performed in 12, and mean value of SO2[LPA-RV] was 6.3%, Q/Q 2.09, peak systolic pulmonary arterial pressure 45.3 mmHg, and Rp/Rs 0.365. 7. All operations were carried out by posterolateral thoracotomy. In 6 patients, division and suture of ductus were possible, the other patients were treated by division and ligation with heavy silk or Dacron patch. 8. Postoperative complications were hoarseness, persistent murmur, reoperation for bleeding, and atelectasis. Early and late mortality was 20% [3 patients], and cause of death was mainly aneurysmal rupture of previous operative site.

• Journal of Chest Surgery
• /
• v.20 no.3
• /
• pp.528-535
• /
• 1987

A clinical study was performed on 164 cases of PDA experienced at the Dept. of Thoracic and Cardiovascular Surgery of Pusan National University Hospital during 6 years from Jan. 1981 to Dec. 1986. It was shown that the PDA was a female-dominant heart disease [male to female ratio, 1:2.8] and two most common symptoms were frequent URI [45.6%] and exertional dyspnea [36.7%]. Continuous machinery murmurs were detected in 143 cases [87.2%], increased pulmonary vascularities [89.0%] and cardiomegalies [63.4%] by chest X-ray. The signs of LVH [43.9%], RVH [3.7%] and BVH [4.9%] were noted on the EKG. Cardiac catheterizations were performed on 67 out of 164 patients and the mean systolic pulmonary artery pressure was 48mmHg [range: 18-131mmHg] and the mean Qp/Qs was 3.1 [range:1.2-8.5] and Rp/Rs below 0.25 was 83.6%. Associated cardiac anomalies were VSD [7.9%], ASD [3.0%], pulmonary valvular stenosis [2.4%] and left persistent SVC [2.4%]. Operative methods were as follows; ligations [145; 88.4%] and divisions [6;3.7%] were performed through the left posterolateral thoracotomies without mortality and the remained cases [13;8.0%] were managed under the cardiopulmonary bypass because of the associated cardiac anomalies. Atelectasis [4.9%] and pneumonia [4.3%] were most frequent postoperative complications and the overall mortality rate was 2.4% [4 out of 164 cases].

• Journal of Satellite, Information and Communications
• /
• v.9 no.3
• /
• pp.27-32
• /
• 2014

A doppler shift is generated by moving a transmitter or receiver operated in communication systems. The doppler frequency shift between a transmitter and a receiver or the frequency offset present in transceivers must be removed to get the wanted system performance. FTS is used for preventing an accident from operating abnormally and for guaranteeing public protection. A launching vehicle's initial velocity is very fast in order to escape the earth and the amount of doppler shift is large. Recently many studies to adopt the next generation FTS are ongoing. To introduce new FTS, the effects of doppler shift on the performance of the new FTS must be studied. In this paper the doppler effect caused by launching vehicle's velocity affecting the performance of FTS receiver is investigated into two cases, one is for EFTS as a digital FTS and the other is for FTS using a tone signal. Noncoherent DPSK and noncoherent CPFSK are considered as the modulation methods of EFTS. In the cases of the doppler frequency shift of 200Hz present in EFTS using noncoherent DPSK and noncoherent CPFSK are simulated. Simulation results show that $E_b/N_o$ of 0.5dB deteriorates in the region of near BER of about $10^{-5}$ in RS coding. And there is no performance variation in $E_b/N_o$ or $E_b/N_o$ is worsened about 0.1dB in the same BER region for the case of using convolutional and BCH coding. Quadrature detector used in FTS using tone signals is not influenced by the doppler frequency shift.

• Water Engineering Research
• /
• v.3 no.2
• /
• pp.85-92
• /
• 2002

There has been continuous efforts to manage water resources for the required water quality criterion at river channel in Korea. However, we could obtain the partial improvement only for the point sources such as, waste waters from urban and factory site through the water quality management. Therefore, it is strongly needed that the best management practice throughout the river basin fur water quality management including non-point sources pollutant loads. This problem should be resolved by recognizing the non-point sources pollutant loads from the upstream river basin to the outlet of the basin depends on the landuse and soil type characteristics of the river basin using the computer simulation by a distributed model based on the detailed investigation and application of Geographic Information System (GIS). The purpose of this study is consisted of the three major distributions, which are the investigation of spread non-point sources pollutants throughout the river basin, development of the base maps to represent and interpret the input and outputs of the distributed simulation model, and prediction of non-point sources pollutant loads at the outlet of a up-stream river basin using Agricultural Non-Point Sources Model (AGNPS). For the validation purpose, the Seom-Jin River basin was selected with two flood events in 1998. The results of this application showed that the use of combined a distributed model and an application of GIS was very effective fur the best water resources and quality management practice throughout the river basin

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.10
• /
• pp.1075-1085
• /
• 2008

Recently, it is studied actively that DVB-S2 for mobility standard(DVB-S2M) is combined with DVB-H, DVB-T and conventional DVB-S2 standard for continuous satellite broadcasting and internet service. Especially, overcoming deep fading by tunnel is main subject. For overcoming deep fading, DVB-S2M proposed cross layer system is consist of upper layer and physical layer. Thus, this paper proposed optimal upper layer coding system fixing the physical layer coding under the simulation results by coding methods, train speed, data rate, interleaver size and IP packet size.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.59-69
• /
• 2018

This study deals with the case study on the pallet quantity determination problem for the flexible manufacturing system producing 32 different types of aircraft wing ribs which are major structures of an aircraft wings. A Korean company has constructed the WFMS (wing rib flexible manufacturing system) that is composed of several automated equipments such as the 5-axis machining centers, the RGV (rail guided vehicles)s, the AS/RS (automated storage and retrieval system), the loading/unloading stations, and so on. Pallets play a critical role in the WFMS to maintain high system utilization and continuous work flow between 5-axis machining machines and automated material handling devices. The discrete event simulation method is used to evaluate the performance of the WFMS under various pallet mix alternatives for wing rib manufacturing processes. Four performance measures including system utilization, throughput, lead-time and work in process inventory level are investigated to determine the best pallet mix alternative. The best pallet mix identified by the simulation study is adopted in setting up and operating a real Korean aircraft parts manufacturing shop. By comparing the real WFMS's performances with those of the simulation study, we discussed the cause of performance difference observed and the necessity of developing the CPS (cyber physical system).

• Pediatric Infection and Vaccine
• /
• v.14 no.2
• /
• pp.179-187
• /
• 2007

Purpose : Acute viral respiratory tract infection is the most common illness among children. Involved organisms are respiratory syncytial virus (RSV), influenza virus, adenovirus, parainfluenza virus, etc. The objective of the present study is to determine epidemiology of each viral infection in Busan, South Korea between January 2004 and December 2006. Methods : We retrospectively analyzed the results of clinical samples of throat and nasal swab collected from Busan city, South Korea between January 2004 and December 2006. We collected these samples from the children with acute respiratory illness. Viruses were detected by virus culture Results : The identified pathogens were influenza A in 131 cases (46.6 percent), RSV in 40 cases (14.2 percent), influenza B in 37 cases (13.2 percent), adenovirus in 23 cases (8.2 percent), enterovirus in 37 cases (13.2%) [coxsackie virus in 20 cases (7.1 percent), atypical enterovirus in 9 cases (3.2 percent), poliovirus in 4 cases (1.4 percent), echovirus in 4 cases (1.4 percent)], rhinovirus in 9 cases (3.2 percent), parainfluenza virus in 2 cases (0.7 percent), coronavirus and bocavirus in each 1 case (0.4 percent). Influenza A were detected every year, mostly in December through April and RSV in October through February. Adenovirus were detected through out the year. Bocavirus occurred in December, 2006. Conclusion : We analyzed epidemiologic characteristics of viruses to cause the respiratory disease that prevailed at Busan area for recent three years, and from now on, a further continuous study will be necessary.

• Journal of the Korean Vacuum Society
• /
• v.22 no.3
• /
• pp.156-161
• /
• 2013

We fabricated transparent conductive electrodes with silver (Ag) nanofibers by electrospinning process. Ag nanofibers have high aspect ratio and fused junctions which result in low sheet resistance. Electrospinning is a fast and efficient process to fabricate continuous one-dimensional (1D) nanofibers. Ag/polymer ink were prepared in polymer matrix solution by a sol-gel method. Then, Ag/polymer nanofibers precursors are heated at $200{\sim}500^{\circ}C$ in air for 2 h to eliminate partially the polymers. The topographical features of the Ag nanofibers were characterized by FE-SEM, and the electrical property was analyzed through I-V measurement system. Finally, optical property was measured using UV/VIS spectroscopy. The transparent conductive electrodes with Ag nanofibers exhibited a sheet resistance (Rs) of $250{\Omega}/sq$ at a transparency (T) of 83%. Transparent conductive films, contain the Ag nanofibers as conductive materials, have good electrical, optical, and mechanical properties. Therefore, it is expected to be useful for the application of flexible display in the future.