• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9A
• /
• pp.844-851
• /
• 2010

Recently, AODV routing protocol which one of the table driven method for the purpose data transmission between nodes has been broadly used in mobile wireless sensor networks. An existing AODV has a little overhead of routing packets because of keeping the routing table for activity route and re-routes to recovery the routes in route discontinuation. However that has faults in that excesses useless of the network bandwidth to recovery the route and takes a lone time to recovery the route. This paper proposes an efficient route recovery method for AODV based on wireless sensor networks in connection breaks. The proposed method. The propose method controls the number of RREQ message considering the energy's node and distance between nodes to restrict the flooding range of RREQ message while expanding the range of local repair. In test results, the proposed method are compared to existing method, the number of drops decrease 15.43% and the delay time for re-route decrease 0.20sec.

• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1347-1360
• /
• 2018

Owing to limited energy in wireless devices power saving is very critical to prolong the lifetime of the networks. In this regard, we designed a cross-layer optimization mechanism based on power control in which source node broadcasts a Route Request Packet (RREQ) containing information such as node id, image size, end to end bit error rate (BER) and residual battery energy to its neighbor nodes to initiate a multimedia session. Each intermediate node appends its remaining battery energy, link gain, node id and average noise power to the RREQ packet. Upon receiving the RREQ packets, the sink node finds node disjoint paths and calculates the optimal power vectors for each disjoint path using cross layer optimization algorithm. Sink based cross-layer maximal minimal residual energy (MMRE) algorithm finds the number of image packets that can be sent on each path and sends the Route Reply Packet (RREP) to the source on each disjoint path which contains the information such as optimal power vector, remaining battery energy vector and number of packets that can be sent on the path by the source. Simulation results indicate that considerable energy saving can be accomplished with the proposed cross layer power control algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1011-1016
• /
• 2020

Rapid change in network topology in high-speed VANET(: Vehicular Ad Hoc Network) is an important task for routing protocol design. Selecting the next hop relay node that affects the performance of the routing protocol is a difficult process. The disadvantages of AODV(: Ad Hoc On-Demand Distance Vector) related to VANET are end-to-end delay and packet loss. This paper proposes the AAODV (Advanced AODV) technique to reduce the number of RREQ (: Route Request) and RREP (: Route Reply) messages by modifying the AODV routing protocol and adding direction parameters and 2-step filtering. It can be seen that the proposed AAODV reduces packet loss and minimizes the effect of direction parameters, thereby increasing packet delivery rate and reducing end-to-end delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.830-836
• /
• 2006

One of the seminal operation parameters of AODV is the node-to-node travel time of data, which is currently set to fixed value of 40 ms in the RFC3561 and widely used to compute other parameters such as the expected round-trip time of the connection setup message, etc. We have naturally thought the network performance could be improved by dynamically varying the node-to-node travel time with respect to the traffic condition in the networt rather than using the fixed value, which motivates this work. To this end, we apply the idea of using timestamp; every node places the current time in the message before sending it out, and the receiver node computes the node travel time based on the moving average algorithm by considering not only the current value but also the previous ones in an accumulated and exponentially decreasing fashion with time. We evaluate the performance of the proposed scheme in respect of the number of RREQ messages generated, throughput, and delay as a function of traffic load and node mobility, and compare the result with the original AODV scheme. The results show that the proposed scheme presents noticeable performance improvements, expecially under the condition of high node mobility and high traffic load.

• The KIPS Transactions:PartC
• /
• v.14C no.5
• /
• pp.425-430
• /
• 2007

Without the aid of stationary infrastructure, maintaining routing information for all nodes is inefficient in the Mobile Ad hoc Networks(MANET). It is more efficient when every time routing information is necessary that the source node broadcasts a query message to neighbour nodes. The source node using Ad hoc On-Demand distance Vector(AODV), which is one of the routing protocols of MANET, uses the Expanding Ring Search(ERS) algorithm which finds a destination node efficiently. In order to reduce the congestion of the network, ERS algorithm does not broadcast Route REQuest(RREQ) messages in the whole network. When the timer expires, if source node does not receive Route REPly(RREP) messages from the destination node, it gradually increases TTL value and broadcasts RREQ messages. Existing AODV cost a great deal to find a destination node because it uses a fixed NODE_TRAVERSAL_TIME value. Without the message which is added in existing AODV protocols, this paper measures delay time among the neighbours' nodes by making use of HELLO messages. We propose Adaptive ERS(AERS) algorithm that makes NET_TRAVERSAL_TIME optimum which apply to the measured delay time to NODE_TRAVERSAL_TIME. AERS suppresses the unnecessary messages, making NET_TRAVERSAL_TIME optimum in this paper. So we will be able to improve a network performance. We prove the effectiveness of the proposed method through simulation.

• Journal of Korea Multimedia Society
• /
• v.13 no.6
• /
• pp.849-864
• /
• 2010

This paper proposes a multipath routing protocol called cross-layer multipath AODV (CM-AODV) for wireless ad hoc networks, which selects multiple routes on demand based on the signal-to-interference plus noise ratio (SINR) measured at the physical layer. Note that AODV (Ad hoc On-demand Distance Vector) is one of the most popular routing protocols for mobile ad hoc networks. Each time a route request (RREQ) message is forwarded hop by hop, each forwarding node updates the route quality which is defined as the minimum SINR of serialized links in a route and is contained in the RREQ header. While achieving robust packet delivery, the proposed CM-AODV is amenable to immediate implementation using existing technology by neither defining additional packet types nor increasing packet length. Compared to the conventional multipath version of AODV (which is called AOMDV), CM-AODV assigns the construction of multiple paths to the destination node and makes it algorithmically simple, resulting in the improved performance of packet delivery and the less overhead incurred at intermediate nodes. Our performance study shows that CM-AODV significantly outperforms AOMDV in terms of packet delivery ratio and average end-to-end delay, and results in less routing overhead.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.561-565
• /
• 2006

무선 모바일 애드 혹 네트워크에서 에너지 효율을 위한 많은 라우팅 알고리즘이 연구되어 왔다. 이러한 제안된 다른 알고리즘들을 살펴보면, 에너지 효율 뿐 만 아니라 성능의 향상을 위한 노력도 기울여 왔다. 일반적으로 목적지 노드가 전송받은 RREQ의 메트릭을 통하여 에너지 효율적인 경로를 선택 하게 되는데, 이것은 결국 데이터 전송 지연이 발생하게 된다. 그리고 경로가 설정된 이후에 경로를 유지하는데 있어서, 노드의 이동이나 배터리의 소진으로 링크가 끊기게 되면 경로를 다시 찾는 과정에서 제어 패킷을 다시 플러딩 하기 때문에 여러 노드의 에너지 소비를 초래하게 된다. 본 논문에서는 이러한 문제들을 해결하기 위해 기존의 AODV(On-Demand Distance Vector Routing) 프로토콜을 기반으로 다음과 같은 방법을 제안한다. 먼저 RREQ를 받은 노드가 남은 배터리의 양을 고려하여 전송의 여부를 결정하는 방법을 제안하고, 경로를 유지하는데 있어서 전송의 세기를 통해 노드의 이동성을 인지하고 링크가 끊기기 전에 다른 노드로 경로를 대체함으로써 경로 재설정을 통한 에너지 소비를 줄이는 방안을 제안한다.

• Journal of Communications and Networks
• /
• v.12 no.1
• /
• pp.67-73
• /
• 2010

Current on-demand ad-hoc routing protocols are not appropriate for wireless mesh networks (WMNs), because flooding-based route discovery is both redundant and expensive in terms of control message overhead. In this paper, we propose an efficient on-demand routing approach with directional flooding (DF), which is suitable for the WMNs with limited mobility. In the route discovery process to reach a gateway, our DF scheme can reduce the number of route request (RREQ) packets broadcast by using a restricted directional flooding technique. Simulation results show that ad hoc on-demand distance vector (AODV) with DF (AODV-DF) can significantly reduce routing overhead by RREQ packets and enhance overall performance compared with the original AODV.

• The KIPS Transactions:PartC
• /
• v.11C no.7 s.96
• /
• pp.889-894
• /
• 2004

Most ad-hoc routing protocols such as AODV(Ad Hoc On-Demand Distance Vector) and DSR(Dynamic Source Routing) do not try to search for new routes if the network topology does not change. Hence, with low node mobility, traffic may be concentrated on several nodes, which results in long end-to-end delay due to congestion at the nodes. Furthermore, since some specific nodes are continuously used for long duration, their battery power may be rapidly exhausted. Expiration of nodes causes connections traversing the nodes to be disrupted and makes many routing requests be generated at the same time. Therefore, we propose a load balancing approach called Simple Load-balancing Approach (SLA), which resolves the traffic concentration problem by allowing each node to drop RREQ (Route Request Packet) or to give up packet forwarding depending on its own traffic load. Meanwhile, mobile nodes nay deliberately give up forwarding packets to save their own energy. To make nodes volunteer in packet forwarding. we also suggest a payment scheme called Protocol-Independent Fairness Algorithm (PIEA) for packet forwarding. To evaluate the performance of SLA, we compare two cases where AODV employs SLA or not. Simulation results show that SLA can distribute traffic load well and improve performance of entire ad-hoc networks.

• The KIPS Transactions:PartC
• /
• v.12C no.3 s.99
• /
• pp.429-436
• /
• 2005

A mobile ad hoc network (MANET) is a collection of mobile nodes without any fixed infrastructure or my form of centralized administration such as access points and base stations. The ad hoc on-demand distance vector routing (AODV) protocol is an on-demand routing protocol for MANETs, which is one of the Internet-Drafts submitted to the Internet engineering task force (IETF) MANET working group. This paper proposes a new multipath routing protocol called maximally disjoint multipath AODV (MDAODV), which exploits maximally node- and link-disjoint paths and outperforms the conventional multipath protocol based on AODV as well as the basic AODV protocol. The key idea is to extend only route request (RREQ) message by adding source routing information and to make the destination node select two paths from multiple RREQs received for a predetermined time period. Compared to the conventional multipath routing protocol, the proposed MDAODV provides more reliable and robust routing paths and higher performance. It also makes the destination node determine the maximally node- and link-disjoint paths, reducing the overhead incurred at intermediate nodes. Our extensive simulation study shows that the proposed MDAODV outperforms the conventional multipath routing protocol based on AODV in terms of packet delivery ratio and average end-to-end delay, and reduces routing overhead.