• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.316-322
• /
• 2011

BACKGROUND: Pesticides concentration was monitored in 50 agricultural lakes, and ecological risk for aquatic organism was assessed using risk quotient (RQ) and probabilistic methods. METHODS AND RESULTS: Pesticides concentrations detected in 50 agricultural lakes during peak season (June and September) were in the range of $0.17{\sim}0.99{\mu}g/L$. The RQ for algae and the other species was estimated to be 0.25 and below 0.01, indicating medium risk and no risk. Oxadiazon predominantly contributed to RQ value of 99% for algae, fishes, and amphibians. In terms of hazardous concentration at 5% of species ($HC_5$), ecological risk quotients (ERQ) for oxadiazon ranged from 0.18~0.33, showing a medium risk level. Overall, the concentrations of pesticides were much lower than $HC_5$), value. Probability of combined ecological risk for pesticides ranged from 1.82% to 2.41%. CONCLUSION(s): Combined ecological risk probability did not exceed the acceptable level of 5%, indicating no ecological risk for selected aquatic species. This study suggests that regular ecological risk assessment (ERA) will be required to protect and manage an agricultural lake. Not only ERA at screening level by comparing exposure with toxic effects for aquatic species also advanced ERA technique considering species in indigenous to Korea, chronic toxicity, pulse dose, fate, and environmental factors should be required.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1919-1927
• /
• 1993

A new MAC protocol has been proposed and analysed to relieve the unfairness problems exhibited by the basic version of the DQDB standard. DQDB MAC protocol has the unfairness problems in throughputs. message delay and so or. And when the slots are reused or the file transmissions takes long, the unfairness problems in the system become worse. The new access protocol proposed here, which of called the Balanced DQDB, guarantees a fair bandwidth distribution by using one bit of the dual bus network protocol and keeps up all characteristics of DQDB. the DQDB analysis model introduced by Wen Jing, et al, was considered to analyse a sequential balance distribution of solts. And the probabilities of the empty in operation mode were represented to determine the probabilities for busy bits to generate on each node of the bus using the Markov chain. Through the simulations. the performances of the proposed Balanced DQDB and that of the standard DQDB of the BWB mechanism were compared at the state that the values of the RQ or CD counter on each node varied dynamically. As the results, it is shown that the Balanced DQDB has the decrement of throughputs in upstream, but the numbers of the used empty slots at each node of the Balanced DQDB had more than that of the others because the Balanced DQDB has over 0.9 throughputs in the 70~80% nodes of total node and it has constant throughputs at each node. And there results were analogous to that of the analytical model.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.767-775
• /
• 2014

The shelf-life of fresh mushrooms is notably limited because their browning, texture change, and decay are too fast after immediately harvest. Especially, the best management for extending golden needle mushroom's shelf-life is modified atmosphere packaging under pressure vacuum at cold storage. In this study, three types of films, $20{\mu}m$ polyethylene+polypropylene (PE+PP), oriented polypropylene (OPP), and low density polyethylene (LDPE) were tested to extend the shelf-life of golden needle mushrooms. Mushrooms were packed under pressure vacuum and stored at $10^{\circ}C$ for 2 weeks. The golden mushrooms in LDPE film as a commercial packaging, were highly perishable and immediately proceed deterioration as browning, elongation, fluctuation of respiratory quotient (RQ) and softening within 7 days after packaging. On the other hand, the mushrooms in OPP and PE+PP film shown that shelf-life were extend to 14 days from 7 days, causing delay breakup of vacuum and maintenance of color, length, and RQ during storage. The breakup of vacuum in PE+PP film was faster few days than OPP film packaging. This present study indicated that the golden needle mushrooms by OPP packaging under pressure vacuum treatment might be extended the shelf-life until approximately 14 days during cold storage.

• Korean journal of applied entomology
• /
• v.10 no.1
• /
• pp.23-30
• /
• 1971

This work was carried out to study the chemical properties, the activity of several enzymes, chemical components and the respiratory intensity of mite galls on the leaves of Lycium chinense MILL. caused by Eriophyes kuke KISHIDA. The activities of catalase and peroxidase were higher in the gall tissue, when compared to the healthy tissue, and were increased as tile gall developed. The activity of phosphorylase of the healthy tissue seemed to be higher than that of the large gall l tissue, considering the competitive inhibition of phosphomonoeoterase and $\beta-amylase$, The activities of invertase and $\beta-amylase$ were about two times higher in the large sail tissue than those of the healthy tissue. The content of the crude protein was $20\%$ higher in the small gall tissue than that of the healthy leave tissue, and decreased as the gall matured. On the other hand, the reducing sugar level was less in the small gall tissue than that of the healthy leaves, but as the gall grew, the content of reducing sugar of the gall tissue was increased. The contents of phosphorus and tannin were increased gradually as the gall matured, and their content showed about two times higher than those of the healthy. The matured gall tissue showed higher $QO_2$ than the healthy tissue. On the other hand, the matured gall tissue presented lower $QCO_2$ than the healthy tissue, and the RQ of the healthy tissue was higher than that of the gall tissue.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.3
• /
• pp.611-620
• /
• 2012

Objectives : This study evaluated the changes in surface roughness of denture base resin according to the types of denture cleansers. Methods : A denture base resin(Vertex RS, Dentimax, Netherland) was used. Two toothpaste(Antiplaque, Bukwang, Korea; 2080, Aekyung, Korea) and a kitchen detergent(Trio, Aekyung, Korea) were used as a denture cleanser. The specimens were put on the V8 crossbrushing machine(Sabri enterprises, Downers grove, IL, USA) to reproduce toothbrushing and the toothbrushes were flat, round end and soft type. The surfaces of denture base resin specimens were observed by profilometer(SJ-400, MITUTOYO, Japan) and SEM(S-3000N, Hitachi Co., Ibaraki, Japan). Results : 1. According to the result of measuring surface roughness, there was statistically significant difference in Ra, Rq, and Rz(p<0.05). 2. As for Ra, Rq and Rz, Antiplaque toothpaste showed the highest roughness, and there was significant difference from other groups(p<0.01). 2080 toothpaste, Trio, and distilled water were classified as the same group. 3. According to the result of observation with the SEM, the surfaces of the Antiplaque toothpaste group after toothbrushing showed the greatest roughness, and the surfaces of 2080 toothpaste, Trio, and distilled water groups were rough in order. Trio and distilled water had the surfaces similar to those before toothbrushing. Conclusions : Studies to compare the efficacy of denture management methods and examine the effects of denture cleansers on denture materials will be helpful for dental hygienists and dentists providing patients with proper information and education. And it will be also useful for denture users' oral health.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.1
• /
• pp.19-30
• /
• 2014

For the expansion of the Semantic Web, studies in converting the data stored in the relational database into the ontology are actively in process. Such studies mainly use an RDB to RDF mapping model, the model to map relational database components to RDF components. However, pre-proposed mapping models have got different expression modes and these damage the accessibility and reusability of the users. As a consequence, the necessity of the standardized mapping language was raised and the W3C suggested the R2RML as the standard mapping language for the RDB to RDF model. The R2RML has a characteristic that converts only the relational database schema data to RDF. For the same reasons above, the ontology about the relation data between table name and column name of the relational database cannot be added. In this paper, we propose an RDB to RDF mapping system considering semantic relations of RDB components in order to solve the above issue. The proposed system generates the mapping data by adding the RDFS attribute data into the schema data defined by the R2RML in the relational database. This mapping data converts the data stored in the relational database into RDF which includes the RDFS attribute data. In this paper, we implement the proposed system as a Java-based prototype, perform the experiment which converts the data stored in the relational database into RDF for the comparison evaluation purpose and compare the results against D2RQ, RDBToOnto and Morph. The proposed system expresses semantic relations which has richer converted ontology than any other studies and shows the best performance in data conversion time.

• The korean journal of orthodontics
• /
• v.30 no.4 s.81
• /
• pp.453-465
• /
• 2000

The purpose of this study was to investigate the change of mechanical properties, surface topography and frictional force of various nickel titanium wires after recycling. Three types of nickel-titanium wires and one type of stainless steel wire were divided to three groups: as-received condition(T0:control group), treated in artificial saliva for four weeks(T1) and autoclaved after being treated in artificial saliva(T2). Some changes were observed for the selected mechanical properties in tensile test, surface topography by means of SEM and 3D profilogram, and frictional coefficient. The findings suggest that: 1. Nickel-titanium wires demonstrated no statistically significant differences in maximum tensile strength, elongation rate and modulus of elasticity, but stainless steel wire demonstrated statistically significant differences in maximum tensile strength, elongation rate and modulus of elasticity between the groups(p<0.05). 2. NiTi, Optimalloy, Stainless Steel wires demonstrated increased pitting and corrosion in SEM finding. 3. Recycled NiTi, Optimalloy and stainless steel wires demonstrated significantly greater surface roughness(Ra and Rq) through 3D profilogram when compared with the control wires(p<0.05), but Sentalloy didn't demonstrate significant difference. 4. Recycled NiTi, Optimalloy and stainless steel wires demonstrated significantly greater maximum frictional coefficient when compared with the control wires(p<0.05), but Sentalloy didn't demonstrate significant difference The changes of surface roughness and frictional coefficient in NiTi and Optimalloy had no clinical implication. Consequently recycled nickel titanium wires demonstrated no clinical problem in tensile properties, surface topography and frictional coefficient.

• Animal Bioscience
• /
• v.35 no.5
• /
• pp.690-697
• /
• 2022

Objective: This study aimed to evaluate the effect of the ad libitum and restricted feeding regimen on fasting heat production (FHP) and body composition. Methods: Twelve Hubbard broilers breeders were selected with the same body weight and submitted in two feeding regimes: Restricted (T1) with feed intake of 150 g/bird/d and ad libitum (T2). The birds were randomly distributed on the treatments in two runs with three replications per treatment (per run). The birds were adapted to the feed regimens for ten days. After that, they were allocated in the open-circuit chambers and kept for three days for adaptation. On the last day, oxygen consumption (VO₂) and carbon dioxide production (VCO₂) were measured by 30 h under fasting. The respiratory quotient (RQ) was calculated as the VCO₂/VO₂ ratio, and the heat production (HP) was obtained using the Brower equation (1985). The FHP was estimated throughout the plateau of HP 12 hours after the feed deprivation. The body composition was analyzed by dual-energy X-ray absorptiometry scanning at the end of each period. Data were analyzed for one-way analysis of variance using the Minitab software. Results: The daily feed intake was 30 g higher to T2 (p<0.01) than the T1. Also, the birds of the T2 had significatively (p<0.05) more oxygen consumption (+3.1 L/kg^0.75/d) and CO₂ production (+2.2 L/kg^0.75/d). That resulted in a higher FHP 359±14 kJ/kg^0.75/d for T2 than T1 296±17.23 kJ/kg^0.75/d. In contrast, the RQ was not different between treatments, with an average of 0.77 for the fasting condition. In addition, protein and fat composition were not affected by the treatment, while a tendency (p<0.1) was shown to higher bone mineral content on the T1. Conclusion: The birds under ad libitum feeding had a higher maintenance energy requirement but their body composition was not affected compared to restricted feeding.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.6
• /
• pp.2165-2182
• /
• 2017

Let G be a group and $\mathbb{C}$ the field of complex numbers. Suppose ${\sigma}:G{\rightarrow}G$ is an endomorphism satisfying ${{\sigma}}({{\sigma}}(x))=x$ for all x in G. In this paper, we first determine the central solution, f : G or $G{\times}G{\rightarrow}\mathbb{C}$, of the functional equation $f(xy)+f({\sigma}(y)x)=2f(x)+2f(y)$ for all $x,y{\in}G$, which is a variant of the quadratic functional equation. Using the central solution of this functional equation, we determine the general solution of the functional equation f(pr, qs) + f(sp, rq) = 2f(p, q) + 2f(r, s) for all $p,q,r,s{\in}G$, which is a variant of the equation f(pr, qs) + f(ps, qr) = 2f(p, q) + 2f(r, s) studied by Chung, Kannappan, Ng and Sahoo in [3] (see also [16]). Finally, we determine the solutions of this equation on the free groups generated by one element, the cyclic groups of order m, the symmetric groups of order m, and the dihedral groups of order 2m for $m{\geq}2$.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.867-873
• /
• 2008

Model based virtual Flight Control System construction is essential for Fly-by-Wire Flight Control System verification & validation(V&V) of concurrent engineering base. We researched the concept of dual-architecture system for virtual system construction, and analyzed Flight Control System that is applied to high altitude long endurance(HAE) UAS. Finally, we constructed the model based virtual Flight Control System with system analysis and achieved system verification about flight critical failure modes. Analysis target is RQ-4A.