• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.671-677
• /
• 2011

A diversity of railway network function enhancement projects such as the double tracking, electrification, and direct operation have been actively executed to improve the railway service. When the new rapid transit is provided, how many people will use it instead of other transports? How will the railway choice behavior be changed? Accordingly, in this paper, the applicability of diverted travel demand forecast methods, by Revealed Preference(RP) and Stated Preference(SP) data was reviewed for Daegu metropolitan rail rapid transit service. As the result of combining RP and SP data, including the sequential and simultaneous approach, the total travel time and travel cost parameters are of the right sign and are highly significant. The simultaneous approach is more efficient in terms of the estimation of coefficients. In particular, methods to improve validity of the Mixed RP/SP models, when RP data is used proportionally, the diverted travel demand can be easily identified by railway fare and travel time service level. Therefore, it is considered that this will practically apply even in other regions as well as Daegu metropolitan railway.

• Microbiology and Biotechnology Letters
• /
• v.43 no.4
• /
• pp.385-390
• /
• 2015

In order to develop an eco-friendly biofertilizer, a plant growth promoting rhizobacterium (PGPR), Bacillus sp., SH1RP8 was investigated. SH1RP8 was lyophilized via freeze-drying along with other protective agents that protect cells from lysis. The freezedried powder of Bacillus sp. SH1RP8, containing 5% skim milk (w/v), exhibited the highest survival rate of 30.6% among all the protective agents (skim milk, glucose, and peptone). The lyoprotective effect of the skim milk, mixture including 5% skim milk, and substrates on the survival of the test strain was examined. Control group was added only skim milk and test groups were added skim milk and other substrates. As a result, the group supplemented with both glycerol and 5% skim milk showed the protective effect much higher by 214.29% than the control group. Freeze-dried Bacillus sp. SH1RP8 could be a good candidate as a potential biofertilizer due to its effective PGPR activity.

• BMB Reports
• /
• v.39 no.2
• /
• pp.208-215
• /
• 2006

The human ribosomal protein S3 (rpS3) was expressed in E. coli using the pET-I5b vector and the monoclonal antibodies (mAbs) were produced and characterized. A total of five hybridoma cell lines were established and the antibodies recognized a single band of molecular weight of 33 kDa on immunoblot with purified rpS3. When the purified rpS3 was incubated with the mAbs, the UV endonuclease activity of rpS3 was inhibited up to a maximum of 49%. The binding affinity of mAbs to rpS3 determined by using a biosensor technology showed that they have similar binding affinities. Using the anti-rpS3 antibodies as probes, we investigated the cross-reactivities of various other mammalian brain tissues and cell lines, including human. The immunoreactive bands on Western blots appeared to be the same molecular mass of 33 kDa in all animal species tested. They also appear to be extensively cross-reactive among different organs in rat. These results demonstrated that only one type of immunologically similar rpS3 protein is present in all of the mammalian brain tissues including human. Furthermore, these antibodies were successfully applied in immunohistochemistry in order to detect rpS3 in the gerbil brain tissues. Among the various regions in the brain tissues, the rpS3 positive neurons were predominantly observed in the ependymal cells, hippocampus and substantia nigra pars compacta. The different distributions of rpS3 in brain tissues reply that rpS3 protein may play an important second function in the neuronal cells.

• Journal of the Korean Regional Science Association
• /
• v.32 no.4
• /
• pp.39-49
• /
• 2016

The main objective of this paper is to analyze university students' modal shift for commuting trip due to the introduction of new urban rail transit in a satellite city of metropolitan area. The paper uses SP(2011)/RP(2013) data collected from Yeungnam University in Gyeongsan City, which is a satellite city of Deagu Metropolitan City. So far few researches, especially using before-and-after individual SP/RP travel survey, have been conducted on analyzing university students' modal shift due to the introduction of new urban rail transit. For this research, some descriptive statistical analyses were conducted. Furthermore, some empirical logit models were estimated for analyzing factors affecting the modal shift. Finally, some important findings and policy implications are discussed. The significant findings from this research are summarized as follows. From the descriptive statistical analyses of SP and RP data, it is found that the rate of modal shift to rail transit is relatively high especially for bus travellers. Furthermore, from the empirical SP model estimation, it is found that time saving is the most important factor affecting the modal shift to urban rail transit. On the other hand, from the empirical RP model estimation, it is found that residential location is the most important factor affecting the modal shift to urban rail transit.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.158-163
• /
• 2001

This study is the selection of optimum forming condition for RP system using ADS. Program using ADS reduces the required time for feedback between design and manufacturing of workpiece. When we produce rapid prototype using RP system, we investigate the relationship between Facetres in system variable number of AutoCAD and roundness of rapid prototype, and we will find optimum forming condition in RP system.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.573-576
• /
• 2005

대표적인 신$\cdot$재생에너지의 시장확대 정책으로 RPS와 기준가격의무구매제가 주요 선진국에서 실시되고 있으며 자국의 자원부존과 경제사회여건에 맞춰 적합한 정책수단을 선택하고 있음. RPS 실시국가에서 RPS는 특별법으로 제정되어 실시효과를 극대화하고 있으며, 신$\cdot$재생에너지발전 인중서의 거래를 포함시켜 시너지효과를 거두고 있음. RPS의 단일의 최적모델은 존재하지 않으며 기본설계와 세부사항은 각 국의 고유의 자원부존 여건 및 경제사회적 특징에 따라 달라짐. RPS의 국내도입이 전력시장과 국민경제에 미치는 영향은 그리 크지 않으며 외부효과를 감하면 편익을 초래함. 또한 수요조사결과 RPS에 대한 선호도가 비교적 높게 나타나며 산$\cdot$ 재생에너지발전의 시장확대 수단으로 높은 점수를 매기고 있음 그러나 RPS의 기본설계를 신중히 가져가야 할 것이며, 법제도 정비에 임해서는 기존에 실시되고 있는 기준가격우선구매제도(발전차액보전)의 고려해야 함.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1193-1198
• /
• 2003

Translucent plastics are commonly used in packaging of mechanical and/or electrical components. Although Rapid Prototyping(RP) provides prototypes of various materials, translucent RP parts are not readily available from most RP processes. ABSi is one of the ABS materials available for Stratasys' FDM process, and the material has potential to be translucent. In this paper, two post-processing techniques were applied in order to increase optical transmissivity of the parts made of FDM's ABSi. First, elevated temperature condition was applied resulting in increased transmissivity while dimensional shrinkage was observed. Second, resin infiltration and surface sanding provided upto 16% transmissivity without shrinkage. These post-processes can be selectively applied to increase transmissivity of ABSi parts. Thus, translucent FDM part can be fabricated from regular FDM process followed by the post-processes developed in this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.83-86
• /
• 1997

Even as many methods and technologies have been introduced on data generation, parts orientation and layer slicing to acquire the rapid prototyping(RP) parts that have useful surface to satisfy customers' needs such as stylingldesign verification directionlindirect tooling directly from the RP machine, these trials continue to suffer from the surface roughness due to the build characteristics of RP technology. A new postprocess finishing method is suggested in this paper to overcome the surface roughness problem on the surface of the RP parts. To prevent deterioration of dimensional accuracy from the conventional grinding-only, and coating-grinding methods, 4-step surface finishing process is applied. To satisfy the various requirements from the RP oriented industrial f elds, effective procedure, coating material, grmd~ng tools and methods are employed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.441-447
• /
• 2003

In the study, we described on the 3D solid model be made on the AutoCAD haved an effect on the deviation of form as RP manufactures the facetres. The STL file improved the deviation of form as the facetres value but the deviation of form have the difference a little as the RP system. In result, we ruled the correlation with the 3D solid model and the RP sample manufacturing, with manufacture RP sample according to facetres value in complex shape. And we developed the program which recombination the STL file that we make use of the AutoLISP.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.4
• /
• pp.106-114
• /
• 1994

A new merging technique is adopted for combining rectangular parallelepipes produced by 2-D rectangular code into more intuitive 30D volume elements. Rectangular parallelepiped codes (RP codes) can be used in volume-based representation of a three-dimensional object. We proposed more regularity-conserving 2-D rectangular coding scheme to merge rectangular cells represented by RP codes in three-dimensional space. After being constructed from modified 2-D rectangular code, 3-D RP codes are merged in the two orthogonal directions using new merging algorithm. The shape of merged 3-D object reconstructed by proposed algorithm is shown to be much closer to the original object shape than that of conventional RP codes. The storage requirement of merged object can be also reduced.