• 패션비즈니스
• /
• 제12권2호
• /
• pp.1-11
• /
• 2008

The purpose of this study is to explore to determine the maximum volume with doing permanent waving in flat crown of the head. The method was like this. First of all, the diameter, the ratio of the circumference of a circle to its diameter and the number of rotations were analyzed same hair using permanent waving rods each number of 1$\sim$10. Secondly, the increasing rate of volume of curls number of 1$\sim$10 was analyzed. According to the result of the experiment, as the number of permanent waving rods were bigger, the ratio of the circumference of a circle to its diameter constant was increasing but the number of rotations was decreased. When the permanent waving rods of each number 1-3(Big diameter) were used, the volume was decreased. That's because there was fewer rotation compared to the diameter and was no ample combed dried hair. Due to this kind of reason, there was no perfect curling. Once number 10 permanent waving rods (most small size) was used, the shape of curling was strong and the stability was made after combed dried hair. But volume was decreased by 9% because of the cohesive power. In case of number of 4$\sim$9 rods used, volume was increased. Volume was highest when permanent waving rods was number 5 which was used combing on base both morphology and numerical value.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.11-18
• /
• 2022

In this research, curium oxide (CmO₂) is studied as fuel for VVER-1200 reactor to get an attention to its energy value and possibilities. For this purpose, CmO₂ is used in fuel rods or integrated burnable absorber (IBA) rods with and without UO₂ and then compared with the conventional fuel assembly of VVER-1200 reactor. It is burned to 60 GWd/t by using SRAC-2006 code and JENDL-4.0 data library. From these studies, it is found that CmO₂ is competent like UO₂ as a fuel due to higher fission cross-section of ²⁴³Cm and ²⁴⁵Cm isotopes and neutron capture cross-section of ²⁴⁴Cm and ²⁴⁶Cm isotopes. As a result, when some or all of the UO₂ of fuel rods or IBA rods are replaced by CmO₂, we get a similar k-inf like the reference even with lower enrichment UO₂ fuels. These studies show that the use of CmO₂ as IBA rods is more effective than the fuel rods considering the initially loaded amount, power peaking factor (PPF), fuel temperature and void coefficient, and the quality of spent fuel. From a detailed study, 3% CmO₂ with inert material ZrO₂ in IBA rods are recommended for the VVER-1200 reactor assembly from the once through concept.

• 한국안광학회지
• /
• 제20권3호
• /
• pp.377-384
• /
• 2015

목적: 본 연구는 이간계인 하워드-돌먼 입체검사와 삼간계로 성인의 동적 입체시를 측정하여 비교해 보고, PD 및 굴절이상과 동적 입체시의 상관성을 분석해 보았다. 방법: 평균연령 $21.27{\pm}2.32$(19~32)세인 성인 93명(남자50, 여자43)을 대상으로 이간계(two-rods test)와 삼간계(three-rods test)로 검사거리 2.5 m에서 동적 입체시를 각각 5회 측정하였다. 결과: 이간계와 삼간계로 측정한 동적 입체시는 각각 전체 평균 $29.91{\pm}23.03$초, $23.75{\pm}21.65$초 였고, 이중 남자는 $28.36{\pm}22.38$초, $22.28{\pm}23.79$초 여자는 $31.71{\pm}23.91$초, $25.46{\pm}19.00$초로 이간계에 비해 삼간계로 측정한 동적 입체시가 모두 좋았으나 통계적으로 유의한 차이는 없었다(p>0.05). PD 평균 표준편차 범위 60.63 mm~66.19 mm 사이의 동적 입체시는 이간계 $31.48{\pm}24.87$초, 삼간계는 $22.54{\pm}17.22초$로 통계적으로 유의한 차이가 있었으나(p<0.05), 두 검사법의 동적 입체시와 PD의 상관성은 크지 않았다. 굴절이상을 기준으로 할 때도 이간계에 비해 삼간계로 측정한 동적입체시가 모두 더 좋게 나타났으나 통계적으로 유의한 차이는 없었고(p>0.05) 굴절이상과 두 동적 입체시간의 상관성도 거의 없었다. 두 입체시는 일반적으로 정상인의 동적 입체시로 간주하는 30~50초 범위에 해당하는 결과가 나타났다. 결론: 삼간계는 이간계보다 입체시가 더 낮게 나타나 동적 입체시의 더 낮은 최소 역치를 측정할 수 있고, 두 검사법이 성인의 동적 입체시 표준검사법으로 사용되고 동적 입체시의 기준을 적용하는데 유용할 것으로 사료된다. PD와 굴절이상은 동적 입체시에 큰 영향을 주지 않는 것으로 나타났다.

• Journal of Periodontal and Implant Science
• /
• 제33권2호
• /
• pp.247-257
• /
• 2003

The purpose of this study was to evaluate the difference of subgingival bacterial compositions between periodontally healthy and diseased sites. Subgingival plaque samples were obtained from 100 sites in 20 untreated adult periodontitis patients(experimental group), and 100 sites in healthy individuals(contro1 group). Before sampling, probing pocket depth(PPD) and clinical level of attachment(CAL), Plaque Index(PI), and Sulcus Bleeding Index(SBI) were recorded for each sampled sites. Microbial samples were collected from the bases of gingival sulci or periodontal pockets with sterile curettes. The samples were examined under darkfield microscope(${\times}$400). At least 150 bacteria were evaluated and categorized on the basis of bacterial morphology and motility, i.e. cocci, non-motile rods, motile rods, and spirochetes. In control group, subgingival microbial flora consisted of 73.7% of cocci, 20.0% of non-motile rods, 4.3% of motile rods, and 2.0% of spirochetes. The microbial samples from experimental group consisted of 51.5% of cocci, 19.4% of non-motile rods, 17.6% of motile rods, and 11.6% of spirochetes. The proportion of cocci was higher in control group than in experimental group. Proportions of motile rods and spirochetes were higher in experimental group than in control group. The proportion of nonmotile rods in experimental group and control group was not significantly different. Sulcus Bleeding Index and Plaque Index showed high correlation with the bacterial composition. These findings suggests that examination of subgingival bacterial proportion may serve as more sensitive mirror of the local periodontal status than clinical parameters.

• Design & Manufacturing
• /
• 제2권5호
• /
• pp.34-38
• /
• 2008

It was investigated that two rods of aluminium can be welded by hot extru-pressure welding method with stepped welding dies, and that the welding pressure on the welding surface were analyzed by computer simulation according to the stepped shapes of welding dies. It was known by computer simulation that welding pressure on the welding section of rods welded using stepped welding dies. And it was known by experime- nts that two rods of aluminium can be welded on the end sections by hot pressure welding method using stepped welding dies without relative rotational movement of contacted aluminium rods needed for the purpose of friction heating and pressure.

• Tribology and Lubricants
• /
• 제14권4호
• /
• pp.51-57
• /
• 1998

Recently, bent-axis-type axial piston pumps driven by rods being in extensively used in the world, because of simple design, lightweight, effective cost. So, to guarantee the quality of bent-axis-type axial piston pumps driven by rods, it is necessary to know characteristics of the driving mechanism of rods. But, as they perform both reciprocating and spinning motions, it is difficult to understand driving mechanism. In this paper, I studied the theoretical driving mechanisms of cylinder block driven by rods through geometric method. I found that the cylinder block was driven by one rod in limited area and the driving area was changed by rod's tilting angle and cylinder block's swivel angle.

• Steel and Composite Structures
• /
• 제13권5호
• /
• pp.423-436
• /
• 2012

In this study total of six buckling-restrained braces (BRBs) were manufactured using a square steel rod as a load-resisting core member and a hollow steel tube as restrainer to prevent global buckling of the core. The gap between the core and the tube was filled with steel rods as filler material. The performances of the proposed BRB from uniaxial and subassemblage tests were compared with those of the specimens filled with mortar. The test results showed that the performance of the BRB with discontinuous steel rods as filler material was not satisfactory, whereas the BRBs with continuous steel rods as filler material showed good performance when the external tubes were strong enough against buckling. It was observed that the buckling strength of the external tube of the BRBs filled with steel rods needs to be at least twice as high as that of the BRBs filled with mortar to ensure high cumulative plastic deformation of the BRB.

• 설비공학논문집
• /
• 제6권4호
• /
• pp.427-438
• /
• 1994

This experimental study was earned out to examine the heat transfer characteristics of a 2-dimensional impinging air jet on a flat plate with a set of square rods. The objectives of the study were to investigate the flow and heat transfer characteristics caused by the square rods and to find out the optimum rods arrangement. Experiment was carried out first without using the rods to establish the baseline heat transfer performance. Then, rods of different widths and clearances were installed to cause the turbulence on the fluid flow.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.76-85
• /
• 1997

Recently, bent-axis-type axial piston pumps drived by rod being in extensively used in the world, because of simple design, lightweight, effective cost. So, to guarantee the quality of bent-axis-type axial piston pumps drived by rods, it is necessary to know chracteristics of the forces applied to rods and the driving mechanism of rods. But, as they perform both reciprocating and spinning motions, it is difficult to understand driving mechanism. In this paper, I explained the theoretical driving mechanisms of cylinder block drived by rods through geometric method and the characteristics of the forces applied to them.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.101-108
• /
• 1994

The horizontal continuous casting process with the heating mold was adopted for fabricating defect-free 4043 Al alloy rods of 3.2m dia. with mirror surfaces. These rods were drawn into 2.4mm dia. rods for GTAW welding. The GTAW welding tests were carried out by use of these welding rods with 6061 Al alloy as a base metal. After welding, the X-ray tests, tensile strength tests, bending tests, and microstructural analysis of welded zone and HAZ were carried out. The results represented that the welding rods with good surfaces and welding properties could be made by the horizontal continuous casting, and followed by the drawing process.