• 한국소음진동공학회논문집
• /
• 제13권5호
• /
• pp.327-333
• /
• 2003

Several tests are performed to evaluate road booming noise. Baseline test delivers the information of road noise characteristics. Coupling effect between structure and acoustics is obtained from the mode shapes and the natural frequencies by the modal test. Equivalent stiffness at joint areas between chassis and car-body system can be determined by the input point inertance test. Noise sensitivity of body mounting point of a chassis part can be obtained from the noise transfer function test with input point inertance test. Operational deflection shape makes us analyze the actual vibration modes of the chassis system under actual leading and find noise sources very easily. Finally, the transfer path analysis is used to Identify noise Paths through the chassis system. The objectives and the procedures of the tests are described in this Paper Also, the guideline for efficient road noise evaluation test can be found.

• 한국산업융합학회 논문집
• /
• 제9권4호
• /
• pp.285-291
• /
• 2006

A traffic accident is occurred by unbalance of reciprocal action of driver, vehicle and road conditions. To prevent the traffic accident, rapid and perfect road improvement is needed. But most of road improvement plans have insufficient budget. So decision maker has to determine the priority to invest. A model in this study, analyzing the effect of road conditions to the traffic accident, helps to decide the priority in road improvement. This study considered five danger indices ; 1) traffic volume, 2) speed variance, 3) vehicle mixing rate, 4) curved line radius, and 5) difference between design speed and running speed. Danger rate composed by five indices can be a scale of priority of improvement. The model in this study didn't consider all of factors about traffic accident. But this study can propose the methodology for traffic safety policy. For deriving the model, this study used data from highways in Korea and United States. Therefore the model has to apply the highways only.

• 한국소음진동공학회논문집
• /
• 제20권6호
• /
• pp.515-520
• /
• 2010

The noise map has been applied to predicting the effect of noise and establishing the noise abatement measure for several years overseas. However the introduction of the noise map in Korea is at the initial stage. Thus, we surveyed the several prediction models for road traffic noise used in EU, and the method of applying the noise map in noise impact assessment. In order to improve the noise impact assessment we have to apply the noise map, and propose the guideline of predicting the road traffic noise. We intend to obtain coherency and accuracy of prediction results. As a result of this study, we know that the prediction guideline is an essential prerequisite in order to predict the unified and accurate road traffic noise.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.155-160
• /
• 2001

The road simulator system can simulate the longitudinal, lateral, and vertical movement changed by road conditions and vehicle dynamic characteristics while driving. This system provides the durability evaluation of vehicle suspensions. The system consists of hydraulic actuators, link mechanism, and servo controller. The hydraulic actuators are specially manufactured using low friction seals to endure high speed movement. The link mechanism is designed in order to minimize the dynamic effect during motion and remove the interference between 3axes actuators. The servo controller is composed of sensors, sensor amplifiers - displacement transducers and load cells, and an industrial PC with DSP board which calculates the control algorithm to control hydraulic actuators. The test results are included to evaluate the performance of this simulator comparing vehicle driving test.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.395-406
• /
• 2008

An excavation with the depth of 32.7m will be constructed as a ventilation shaft in Shanghai metro Line 9. The excavation induced effect on a nearby undercrossing road in operation must be properly evaluated. A centrifuge model test was conducted to study the impact of deep excavation on this existing undercrossing. Detail simulation works are described in this paper. The excavation steps could be simulated in the no-stop state of centrifuge machine. And induced settlements of the undercrossing road in both parallel and vertical directions were analyzed. Protective partition cement soil piles were also simulated in the tests. Simulation test shows deep excavation has a great influence on undercrossing road and the partition pile can obviously deduce the influence.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.195-202
• /
• 2013

PURPOSES : This study analyzed the regional dew possibility in road sign using meteorological data. METHODS : Four years of meteorological data such as temperature, humidity, dew point, wind velocity were collected and analyzed. As a result of literature review, dew was frequent in large diurnal range, high humidity and weak wind. So, dew possibility was analyzed by (temperature-dew point ${\leq}1^{\circ}C$ and wind velocity ${\leq}$ 1.5m/s). RESULTS : The possibility was analyzed for each meteorological observation point and the point of Suncheon and Bonghwa were selected as the most likely points of dew in road sign. The area of East Coast, Kyungbuk and Kyungnam were relatively low potential. CONCLUSIONS : Alternative with high effect of preventing dew should be selected in high possibility dew area despite of low economics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 추계학술대회논문집
• /
• pp.512-517
• /
• 2000

The road traffic noise becomes aggravated due to the rapid increase of vehicles. It has a great effect on the dwelling environment. Therefore we investigate the characteristics and sources of the road traffic noise through grasping the status of the road traffic noise. This report is concerned with the description of the various factors affecting the generation and propagation of outdoor traffic noise. It is particularly concerned with the mathematical interpretation of these processes and the resulting development of prediction techniques which are now broadly used for both the environment impact assessment of road traffic noise and the planning and design of roads and adjoining land use.

• 한국도로학회논문집
• /
• 제20권4호
• /
• pp.73-84
• /
• 2018

PURPOSES : Most of the traffic surveys are carried out by an inspection method by the manpower. In some cases, the video equipment is used only in some regions when the traffic volume is surveyed. In this case, there is environmental restriction that the road equipment to fix the video equipment should exist. Also, in areas where information such as digital maps and satellite photographs is old or not provided, they are forced to rely on manpower research, but it is difficult to put huge amounts of time and money into the research in places where labor supply and demand is difficult. This difficulty is particularly pronounced in overseas business. METHODS : The purpose of this study is to improve the efficiency of business by using the drones in the traffic investigation through analysis of the cost reduction effect between the existing method and the proposed method in the overseas business traffic survey. The scope of the research is limited to the scope of research, and based on the case of overseas projects, the method of using drone for each research sector is suggested. RESULTS : In the traffic condition survey section, we propose the use of drone for traffic survey and queue length survey, and it is confirmed that there is a cost saving effect of 16% ~ 27% compared with the existing method. In the road condition survey, we propose the use of drones for road surface linear survey, geometry survey, and obstacle survey, and it was confirmed that the cost reduction effect is 39% ~ 93% compared to the existing method. CONCLUSIONS : In addition to overseas business, it is expected that it will have a positive effect on research time and cost reduction by using drone in traffic survey in domestic area where labor supply is not easy or basic data is insufficient.

• 대한교통학회지
• /
• 제34권4호
• /
• pp.291-303
• /
• 2016

교차로에서 발생한 교통사고건수는 최근 10년간 지속적으로 증가하였고, 2014년 전체 교통사고의 44%를 차지하면서 교차로는 교통안전에 취약한 도로형태로 주목되고 있다. 특히 선정된 사고다발지점 대다수가 신호교차로를 포함하고 있어, 신호교차로의 안전개선 노력이 우선적으로 필요한 실정이다. 이에 정부는 주로 도로안전시설 개선사업을 시행하여 주어진 예산 내에서 단기간에 높은 효과를 얻을 수 있는 안전개선사업을 수행하고자 한다. 이를 위하여 도로안전시설의 사고감소효과를 확인하는 연구가 지속적으로 등장하고 있으나 독립적으로 수행된 연구별 특성은 종합하기 어렵고, 각 연구결과가 대표성을 갖는데 한계가 있기 때문에 여전히 한정된 예산과 불확실한 도로안전시설 설치효과로 인해 선뜻 안전개선사업을 진행하지 못하고 있다. 따라서 본 연구에서는 메타분석을 통해 기존의 신호교차로 교통사고발생에 영향을 미치는 변인을 활용한 여러 사고예측연구 결과를 종합적으로 검토하고, 각 변인이 대표할 수 있는 개선효과를 도출하고자 하였다. 본 연구에서는 신호교차로 전체 사고건수를 종속변수로 하는 연구 중 19건의 논문을 선정하고 8개 변인에 대한 34개의 개별효과크기(effect size)를 산출하였다. 메타분석 결과, 도로안전시설 설치와 신호교차로 교통사고의 관계는 좌회전 전용차로를 제외하고는 모두 통계적으로 유의하게 감소한 사고영향을 나타내어, 도로안전시설이 사고감소에 영향을 준다는 통계적인 결과자료를 도출하였다. 그 중 도류화설치의 효과크기가 가장 높았으며, 좌회전차로 가속구간, 조명시설, 횡단보도, 우회전 전용차로, 중앙분리대 순으로 효과가 높은 것으로 나타났다.

• 한국ITS학회 논문지
• /
• 제21권4호
• /
• pp.190-211
• /
• 2022

본 연구는 자율주행차량의 필수 센서로 인식되는 LiDAR로 도로표지를 검지할 시, 도로표지의 모양과 높이 등이 검지성능에 주는 영향에 대하여 알아보았다. 연구를 위해 면적과 재질은 동일하고, 모양은 서로 다른 도로표지를 4종을 제작하였으며, 32Ch 회전형 LiDAR를 차량 상단부에 장착하여 도로주행실험을 수행하였다. 도로표지의 모양에 따른 점군데이터의 형상과 NPC를 비교한 결과, 32ch LiDAR를 활용하여 도로표지의 전체 모양을 인식하려면 40m 이내의 거리가 필요할 것으로 기대되며, 원거리에서 최대한 점군을 확보하는 데 있어서는 정사각형보다는 삼각형, 직사각형 등의 형상이 유리하였다. 도로표지의 높이에 따른 연구 결과, 근거리(20m이내)에서는 표지의 높이를 2m 이상으로 올리면 LiDAR의 수직시야각에서 이탈하여 완전한 점군 형상을 표현하지 못하게 되며, 차로변화로 센서와 표지 사이의 횡간격과 입사각이 커지게 되면 NPC가 소폭 감소하나 근거리 높이 변화에 비하면 미미한 영향을 보였다. 이러한 연구결과는 자율협력주행기술 상용화를 위한 LiDAR 전용 도로시설물 개발에 활용될 수 있을 것으로 기대된다.