• 한국재료학회지
• /
• 제15권8호
• /
• pp.536-542
• /
• 2005

Recently European Council(EU) published the RoHS(restriction of the use of certain hazardous substances in electrical and electronic equipment) which is prohibit the use of Pb, Hg, Cd, $Cr^{+6}$, PBB or PBDE in the electrical and electronic equipments. So EU member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain 6 hazardous substances. The one of the most important in electronics manufacturing process is soldering. Soldering process use the chemical substances which are applied in fluxing and cleaning processes and it can generate the malfunction of electronics caused by corrosion in the fields conditions. Therefore this study researched on the polarization and Tafel properties of Sn40Pb and Sn3.0Ag0.5Cu(SAC) solder based on the electrochemical theory. We prepared SnPb specimens which was aged in $150^{\circ}C,\;180^{\circ}C$ for 15 minutes ana Sn3.0Ag0.5Cu specimens that was aged in $180^{\circ}C,\;220^{\circ}C$ for 10 minutes. Experimental polarization curves were measured in distilled ionized water and $3.5 wt\%$, 1 mole NaCl electrolyte of $40^{\circ}C$, pH 7.5. Ag/AgCl and graphite were utilized by reference and counter electrode, respectively. To observe the electrochemical reaction, polarization test was conducted from -250 mV to +250 mV. From the polarization curves that were composed of anodic and cathodic curves, we obtained Tafel slop, reversible electrode potential(Ecorr) and exchange current density(Icorr). In these results, corrosion rate for two specimen were compared Sn3.0Ag0.5Cu with SnPb solders

• 대한토목학회논문집
• /
• 제41권5호
• /
• pp.485-492
• /
• 2021

본 연구에서는 서해에 위치한 대산산업단지 해수담수화 시설에 필요한 전력비를 계산하고, 해수온도 및 염분도 변화에 따른 안전도를 고려한 전력비 기준을 산정하였다. 입력 자료(온도 및 염분도)는 국가해양환경정보통합시스템(MEIS, Marine Environment Information System) 22년 자료(1997~2018년)를 이용하고, 해수공정에서 사용되는 전력량은 RO막 제조사에서 제공되는 프로그램(Q-Plus v3.0)을 활용하였다. 금회연구에서는 해수담수화 시설물 설계시 합리적인 전력비 운영 가이드라인을 제시했다는데 의의가 있다. 해수담수화 역삼투압 공정은 약 2.10~2.90 kWh/m³의 전력비가 소요되며, 에너지 안전도 95 % 기준으로 2.80 kWh/m³의 전력비가 해수담수화 시설을 운영할 때 고려되어야 하는 것으로 검토되었다.

• 한국산업보건학회지
• /
• 제29권3호
• /
• pp.310-321
• /
• 2019

Objectives: The purpose of this study was to investigate types and characteristics of chemical substances used in LCD(Liquid crystal display) panel manufacturing process. Methods: The LCD panel manufacturing process is divided into the fabrication(fab) process and module process. The use of chemical substances by process was investigated at four fab processes and two module processes at two domestic TFT-LCD(Thin film transistor-Liquid crystal display) panel manufacturing sites. Results: LCD panels are manufactured through various unit processes such as sputtering, chemical vapor deposition(CVD), etching, and photolithography, and a range of chemicals are used in each process. Metal target materials including copper, aluminum, and indium tin oxide are used in the sputtering process, and gaseous materials such as phosphine, silane, and chlorine are used in CVD and dry etching processes. Inorganic acids such as hydrofluoric acid, nitric acid and sulfuric acid are used in wet etching process, and photoresist and developer are used in photolithography process. Chemical substances for the alignment of liquid crystal, such as polyimides, liquid crystals, and sealants are used in a liquid crystal process. Adhesives and hardeners for adhesion of driver IC and printed circuit board(PCB) to the LCD panel are used in the module process. Conclusions: LCD panels are produced through dozens of unit processes using various types of chemical substances in clean room facilities. Hazardous substances such as organic solvents, reactive gases, irritants, and toxic substances are used in the manufacturing processes, but periodic workplace monitoring applies only to certain chemical substances by law. Therefore, efforts should be made to minimize worker exposure to chemical substances used in LCD panel manufacturing process.

• 대한환경공학회지
• /
• 제30권12호
• /
• pp.1273-1280
• /
• 2008

본 연구에서는 섬유가공공정 중 머서화공정으로부터 가성소다액를 회수하기 위한 최적의 운전조건을 확립하고자 하였다. 주요 인자들로는 NF/RO막의 적용을 위해 세라믹 막을 이용하여 파울링 지수를 평가, 고분자 막의 적용을 위해 가성소다액의 회수율을 측정, 막의 재생율 향상, 화학세정 조건, 유기물부하, 탁도 및 색도의 최적 제거조건, 그리고 세라믹 막과 고분자막의 복합공정에서의 투과플럭스를 조사하였다. 결과에 따르면, 1단계 공정의 세라믹 한외여과막과 2단계 공정의 나노여과막은 총부유고형물, 잔류유기물, 색도를 포함한 탁도의 제거 그리고 가성소다 용액의 회수에 적합한 공정구성임을 확인하였다. 한외여과막만을 단독으로 사용했을 경우, 총 부유물질과 탁도를 99.0%이상 제거하였고, 색도와 TOC는 각각 74.7%와 49.2%의 제거효율을 얻을 수 있었다. 반면에 세라믹 UF+NF 복합막 공정에서는 총 부유물질과 탁도를 99.9%이상 제거할 수 있었고, 색도는 87.7%, TOC는 78.2%의 제거효율을 얻을 수 있었다. 특히, 복합막 공정에서는 83.7%의 부피회수율일 때 91.3% 가성소다를 성공적으로 회수 할 수 있었다. 이러한 측면에서 복합공정을 통해 가성소다 폐수로부터 순도 높은 가성소다액을 회수할 수 있었으며, 회수된 가성소다액은 공정 내에 재사용이 가능하여 경제적인 이득을 기대할 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집D
• /
• pp.447-452
• /
• 2001

Quenching phenomena of hemispherical downward facing convex surfaces with narrow gaps have been investigated experimentally. Experiments employed test sections having 1 and 2 mm in gap thickness and 1 atm in system pressure. From interpretations of the temperature and the heat flux history, it was found that the flooding inside the gap was restricted by CCFL phenomena and quenching process was propagated from lower to upper region of the internal copper shell. The ratio of the maximum heat fluxes at 1 mm to 2mm in gap thickness was the almost same that obtained by steady state experiments. The quenching scenario of the hemispherical downward facing surface with narrow gap has been suggested.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 추계 총회 및 학술발표회
• /
• pp.7-12
• /
• 1993

Preparation of asymmetric polyimide membranes by the phase inversion process was investigated to develop ultrafiltration, reverse osmosis and pervaporation membranes for organic solutions, using a commercially available solvent-soluble polymaide. The influences of the various factors such as the composition of a cast solution, casting conditions, gelating solutions and others on membrane structure and performance were studied in detail, and it was made clear that a wide variety of asymmetric polyimide membranes ranging from UF to RO for organic solutions could be prepared from the aromatic polyimide used. It was also found that the chemical stability and separation performance of the asymmetric polyimide membranes could be improved by annealing in a liquid or a vacuum at above 200$\circ$. The membrane annealed at 300$\circ$ in a vacuum exhibited the separation factor $\alpha(H_2O/EtOH)$ of 900 with the flux of 1.0 kg/$m^2\cdot h$ at 60$\circ$C for an aqueous ethanol solution of 95 vol%.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제37회 추계학술대회논문집
• /
• pp.523-526
• /
• 2011

본 연구는 재료물성치의 불확실성을 고려한 구조신뢰성 해석 기법에 대한 내용이다. 설계변수의 확률분포 및 상태한계방정식을 구하고 이에 대한 확률밀도함수와 누적분포함수 계산 시 근사화 기법인 크리깅을 적용하여 구조신뢰성에 대한 계산 및 해석시간을 단축하고자 하였다. 이에 대한 예제로 알루미늄을 소재로 하는 로켓모터케이스의 재료물성치의 분포를 고려한 구조신뢰성 해석을 수행하고 그 결과를 몬테카를로 시뮬레이션과 비교함으로써 제안된 기법에 대한 정확성과 효율성을 판단하고자 한다.

• Membrane and Water Treatment
• /
• 제3권3호
• /
• pp.181-200
• /
• 2012

At present water crisis is not an issue of scarcity, but of access. There is a growing recognition of the need for increased access to clean water (drinkable, agricultural, industrial use). An encouraging number of innovative technologies, systems, components, processes are emerging for water-treatment, including new filtration and disinfectant technologies, and removal of organics from water. In the past decade many methods have been developed. The most important membrane-based water technologies include reverse osmosis (RO), ultrafiltration (UF), microfiltration (MF), and nanofiltration. Beside membrane based water-treatment processes, other techniques such as advanced oxidation process (AOP) have also been developed. Some unconventional water treatment technology such as magnetic treatment is also being developed.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1995년도 제3회 하계분리막 Workshop (환경과 막분리 공정의 역할)
• /
• pp.39-50
• /
• 1995

The membrane processes that are commonly uscd in water and wastewater treatment are reverse osmosis (Ro), ultrafiltration (UF) and microfiltration (MF), which utilize pressure differentials. There is also nano-filtration (NF), or low-pressure reverse osmosis, which is positioned midway between conventional reverse osmosis and ultrafiltration. Reverse osmosis membranes reject dissolved ions, while ultrafiltration can be used to reject relatively larger molecules, such as protein, polysacchalides and so on. Microfiltration is capable of eliminating particles at submicron level. This paper summarizes the characteristics of MSAS process first, as it is the main membrane process applied to wastewater treatment. Two successful examples of the applications, the cases of individual building reuse system and nightsoil treatment, are then shown. The latest trend of new membrane applications, i.e., immersed-type MSAS is also introduced.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 C
• /
• pp.1649-1651
• /
• 2001

The effect of ribbed spacers having metallic particle attached to the post-type spacer on dielectric breakdown phenomena has been investigated using electric field analysis for imaginary streamer process and a breakdown experiment. It was described that the electric field analysis and the dielectric breakdown test were performed on the case that the particle was attached to the various position of the ribbed spacer having various shapes. As a result, the breakdown voltage of the spacer with two ribs was highest, and it was varied by the length and the thickness of the rib. Especially, in case of the rib with round edge, the breakdown voltage was higher than that with rectangular edge, which complied with the result through the field analysis.