• Nuclear Medicine and Molecular Imaging
• /
• v.40 no.3
• /
• pp.148-154
• /
• 2006

Purpose: Although radionuclide cisternography (RNC) is an useful study to detect cerebrospinal fluid (CSF) leakage in the patient with spontaneous intracranial hypotension (SIH), it sometimes fails to demonstrate the site of CSF leakage. The aim of the study is to improve the detection of leakage site of CSF and to reduce time for the study in RNC using modified protocol (m-RNC). Materials & methods : The study consists of 8 studies of 7 patients ($38{\pm}8$ years, M:F=2:5) with SIH, who underwent m-RNC following administration of 185-222 MBq of $^{99m}Tc$-DTPA into the lumbar subarachnoid space. Sequential images were obtained the whole spine with the head including urinary bladder at 10 minute, 30 minute, 1 hour, 2 hour, 4 hour and 6 hour. Radioactivity of extradural space and urinary bladder was evaluated. Results: Leakage site of CSF was identified in all 8 cases by m-RNC. Leakage site was cervicothoracic junction (CTJ, n=3), CTJ with C1-2 (n=2), CTJ with thoracic spine, thoracolumbar spine and lumbar spine (each n=1). All cases presented leakage sites within 1 hour and multiple sites, where CTJ was included in 6 cases. Only one case presented additional site in 6 hour image. Early radioactivity within the urinary bladder was noted in 6 cases, but that was fellowing after identification of the leakage site. Conclusion: Radionuclide cisternography is sensitive to detect the leakage site of CSF and is expected to improve the detection of CSF leakage site and reduce time for the study using modified protocol.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.453-456
• /
• 2000

This paper describes IMT-2000 Testbed System which consists of ATM based IMT-2000 exchange(A-lMX), RNC simulator, HLR simulator, SCP simulator, B-ISDN subscriber simulator and MS simulator. Simulators were developed to verify the mobile functions and basic services of IMT-2000 like Videophone, VoD(Video on Demand), and Internet access. UPT(Universal Personal Telecommunication) service could be adapted well to this testbed system. Until the entire network elements are developed fully, this testbed system can be used to prove new services in IMT-2000 network.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05a
• /
• pp.333-335
• /
• 2010

이동통신시스템에서 RNC의 MCP는 호 처리를 담당하는 부분으로, 신뢰도와 실시간성이 요구된다. MCP는 높은 견고성을 갖도록 구현되지만 다소간의 오류 율(Fault late)은 존재할 수밖에 없으므로 프로세서를 이중화하여 활성화된 프로세서가 장애를 일으키더라도 대기중인 프로세서가 연속적인 서비스를 제공할 수 있어야 한다. 따라서 본 연구에서는 이동통신에서 프로세서 이중화 시스템을 설계하고자 한다.

• Childhood Kidney Diseases
• /
• v.19 no.1
• /
• pp.31-38
• /
• 2015

Purpose: We evaluated the long-term results of endoscopic Deflux$^{(R)}$ injection for treating vesicoureteral reflux (VUR) in children. Methods: Between September 2004 and September 2014, 243 children (137 boys and 106 girls) with a mean age of 53 months underwent Deflux$^{(R)}$ injection. Our clinical protocol included radionuclide voiding cystography (RNC) at postoperative 3 months, 1 year and 3 years to assess the VUR resolution. Results: The cure rates at 3 months, 1 year, and 3 years by patients were 70.8%, 64.3%, and 65.6% for the total patients and 79.2%, 75.2%, and 76.4%, for the ureters, respectively. The recurrence rate of postoperative febrile urinary tract infection (UTI) was 20% in patients without VUR at postoperative 1 year. Twenty patients undergoing ureteroneocystostomy (UNC) significantly had younger age (P=0.003), higher VUR grade (P<0.001), and lower success rates of Deflux$^{(R)}$ injection (P<0.05). On univariate analysis, older age (P=0.014) and lower grade of VUR (P=0.031) were the significant predictors of a successful outcome. But there was none on multivariate analysis. Younger age, especially age of 0-12 month-old, was the only significant predictor of postoperative febrile UTI recurrence on both univariate and multivariate analysis. Conclusion: Deflux$^{(R)}$ injection is efficacious with a low complication rate for the anti-reflux procedure in children. There is low recurrence rate of UTI though VUR persists, and high probability of no VUR at 3 years if no VUR at 1 year. It is recommendable not to perform follow-up RNC at 3 years routinely if no VUR at 1 year.

• Proceedings of the Korean Society of Medical Physics Conference
• /
• 2002.09a
• /
• pp.275-278
• /
• 2002

The recognition of the natural background radiation is important not only for radiological education but also for the promotion of people's scientific view about radiation. We made a "room" on the web showing natural background radiation as part of a VRM (Virtual Radiation Museum). The "room" shows the video images of the tracks of charged particles from natural background radiation, alpha and beta ray track from known sources using a Large Scale Diffusion Cloud Chamber. The purpose of this study is to make clear the origin of a kind of track (named A-track) which is thick and easy to recognize with the length less than several cm in the cloud chamber, and to make numerical explanation of its counting rate. The study was carried out using a Large Scale Diffusion Cloud Chamber (Phywe, Germany) installed in the Niigata Science Museum. The Model RNC (Pylon Electronics, Canada) was used as Rn-222 source. Ra-226 activity in RNC was 111.6 Bq calibrated with NIST protocol. Rn-222 gas was injected into the cloud chamber. Continuous video recording with use of Digital Handycam (SONY, Japan) was carried out for 360 min. after injection of Rn-222 gas. The number of alpha-ray track (alpha track) in the video images was analyzed. The growth and decay curve of the total activity of Rn-222 and its alpha emitting progeny were calculated and compared with the count of the alpha tracks. As a result the alpha tracks formed by Rn-222 injection resemble A-Tracks. The relationship between A-track in the cloud chamber and atmospheric Rn is discussed.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.1
• /
• pp.22-32
• /
• 2020

PURPOSE. The aim of this study was to evaluate the microshear bond strength (µSBS) of four computer-aided design/computer-aided manufacturing (CAD/CAM) blocks repaired with composite resin using three different surface treatment protocols. MATERIALS AND METHODS. Four different CAD/CAM blocks were used in this study: (1) flexible hybrid ceramic (FHC), (2) resin nanoceramic (RNC), (c) polymer infiltrated ceramic network (PICN) and (4) feldspar ceramic (FC). All groups were further divided into four subgroups according to surface treatment: control, hydrofluoric acid etching (HF), air-borne particle abrasion with aluminum oxide (AlO), and tribochemical silica coating (TSC). After surface treatments, silane was applied to half of the specimens. Then, a silane-containing universal adhesive was applied, and specimens were repaired with a composite, Next, µSBS test was performed. Additional specimens were examined with a contact profilometer and scanning electron microscopy. The data were analyzed with ANOVA and Tukey tests. RESULTS. The findings revealed that silane application yielded higher µSBS values (P<.05). All surface treatments were showed a significant increase in µSBS values compared to the control (P<.05). For FHC and RNC, the most influential treatments were AlO and TSC (P<.05). CONCLUSION. Surface treatment is mandatory when the silane is not preferred, but the best bond strength values were obtained with the combination of surface treatment and silane application. HF provides improved bond strength when the ceramic content of material increases, whereas AlO and TSC gives improved bond strength when the composite content of material increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.103-111
• /
• 2002

In RNC of IMT-2000, main control processors such as ASP, ACP and OMP are responsible for call control function, and the high reliability and real-time property should be provided for it. So, the study of real-time fault-tolerant for it is needed. In this paper, we proposes an Task based duplication method, in which Tasks in active side operated on message unit and send the updated data to standby side after operation, log in the message to standby side for recovery during take-over. This scheme decreases the dual down and the complexity of synchronization procedure, and performs the synchronization more exactly because Tasks control the synchronization of system. This paper also proposes the fault detection and the fault handing method for effective implementation of Task based duplication. This scheme focus on increasing the fault detection rate and intercepting originally that fault data is send to standby side.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.3B
• /
• pp.226-236
• /
• 2002

In this paper, we present the channel assignment and management methods for an efficient use of traffic channel resource for supporting 12.2 Kbps, 64 Kbps, and 384 Kbps traffic with the different quality of service (QoS) in the radio network controller (RNC) in asynchronous IMT-2000 system. We first describe two types of traffic channel block assignments for utilizing the traffic channel efficiently; the partially dedicated and partially shared channel (PDPSC) assignment and the completely shared channel (CSC) assignment. The former is that some traffic channel block is completely assigned to each traffic type and the other blocks are shared with some traffic type. The latter is that all traffic channel blocks are completely shared with all traffic types. Further, for efficiently assigning, releasing, and managing the channel resource, we present the traffic channel management method which consists of the block and task management step. Through numerical examples, we evaluate the blocking probability and the mean number of required search for fading the available channel when applying our proposed channel block assignment and resource management methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.24-33
• /
• 2007

In this paper, two different dynamic cell coordination strategies for frequency flat and selective fading are proposed for efficient subcarrier allocation in the joint consideration of adaptive modulation and variable frequency reuse in the channel-aware OFDMA downlink multicellular environment. Compared to a conventional OFDMA system without cell coordination, where system throughput may become degraded due to the persistent interference from other cells, the proposed system dynamically allows RNC to apply different reuse factors on each subchannel and scheduling in consideration of channel and interference conditions of individual users so as to increase the system throughput and guarantee QoS of each user. In a frequency flat fading, the dynamic scheme with the proposed scheduling achieves on average three times larger throughput than the conventional dynamic scheme [8]. In a selective fading channel, the proposed schemes showed 2.6 times as large throughput as that of a single reuse factor of one for all subchannels.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.3
• /
• pp.136-144
• /
• 2023

PURPOSE. The study objective was to evaluate the influence of the type of resin cement on the flexural strength and load to fracture of two chairside CADCAM materials after aging. MATERIALS AND METHODS. A polymer-infiltrated ceramic network (PICN) and a nanoceramic resin (RNC) were used to produce the specimens. Two types of dual-cure resin cements, a self-adhesive and a universal, were investigated. Bilayer specimens were produced (n = 10) and aged for 6 months in a humid environment before the biaxial flexural strength test (σ_f). Bonded specimens were subjected to a mechanical aging protocol (50 N, 2 Hz, 37℃ water, 500,000 cycles) before the compressive load test (L_f). σ_f and L_f data were analyzed using two-way ANOVA and Tukey tests (α = .05). Chi-square test was used to analyze the relationship between failure mode and experimental group (α = .05). RESULTS. The type of resin cement and the interaction between factors had no effect on the σ_f and L_f of the specimens, while the type of restorative material was significant. RNC had higher σ_f and L_f than PICN. There was a significant association among the type of cracks identified for specimens tested in L_f and the restorative material. CONCLUSION. The type of resin cement had no effect on the flexural strength and load to fracture of the two investigated CAD-CAM chairside materials after aging.