• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.2
• /
• pp.144-150
• /
• 2017

Purpose: The aim of this in vitro study is to investigate load bearing capacity of esthetic abutments according to the type of material and wall thickness. Materials and methods: 70 specimens equally divided into seven groups according to their abutment wall thicknesses. The abutments prepared with titanium 0.5 mm wall thickness were used as a control group (Ti-0.5), whereas zirconia abutments and resin nano ceramic abutments with wall thickness 0.5 mm, 0.8 mm and 1.0 mm were prepared as test groups (Zir-0.5, Zir-0.8, Zir-1.0 and RNC-0.5, RNC-0.8, RNC-1.0). All specimens were tested in a universal testing machine to evaluate their resistance to fracture and all of them underwent thermo-cycling before loading test. Mean fracture values of the groups were measured and statistical analyses were made using two-way ANOVA. Results: Zir-1.0 showed the highest mean strength ($2,476.3{\pm}342.0N$) and Zir-0.8 ($1,518{\pm}347.9N$), Ti-0.5 ($1,041.8{\pm}237.2N$), Zir-0.5 ($631.4{\pm}149.0N$) were followed. The strengths of RNC groups were significantly lower compared to other two materials (RNC-1.0 $427.5{\pm}72.1$, RNC-0.8 $297.9{\pm}41.2$) and the strengths of all the test groups decreased as the thickness decreases (P < .01). RNC-0.5 ($127.4{\pm}35.3N$) abutments were weaker than all other groups (P < .05). Conclusion: All tested zirconia abutments have the potential to withstand the physiologic occlusal forces in anterior and posterior regions. In resin nano ceramic abutments, wall thickness more than 0.8 mm showed the possibility of withstanding the occlusal forces in anterior region.

• The Journal of the Korean dental association
• /
• v.56 no.3
• /
• pp.167-174
• /
• 2018

The development of dental materials has widened the scope of materials by changes in processing methods. CAD/CAM processing enables the use of zirconia as a dental material. Recent esthetic materials development has been made. For aesthetic purposes, a block for CAD/CAM processing by mixing polymer and ceramic materials are fabricated. However there is no guideline of how these materials should be used in actual clinical practice. Mechanical properties, wear and clinical studies were reviewed.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.4
• /
• pp.275-284
• /
• 2016

PURPOSE. The aim of this study was to evaluate the influence of different surface treatment methods on the microtensile bond strength of resin cement to resin nanoceramic (RNC). MATERIALS AND METHODS. RNC onlays (Lava Ultimate) (n=30) were treated using air abrasion with and without a universal adhesive, or HF etching followed by a universal adhesive with and without a silane coupling agent, or tribological silica coating with and without a universal adhesive, and divided into 6 groups. Onlays were luted with resin cement to dentin surfaces. A microtensile bond strength test was performed and evaluated by one-way ANOVA and Tukey HSD test (${\alpha}$=.05). A nanoscratch test, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy were used for micromorphologic analysis (${\alpha}$=.05). The roughness and elemental proportion were evaluated by Kruskal-Wallis test and Mann-Whitney U test. RESULTS. Tribological silica coating showed the highest roughness, followed by air abrasion and HF etching. After HF etching, the RNC surface presented a decrease in oxygen, silicon, and zirconium ratio with increasing carbon ratio. Air abrasion with universal adhesive showed the highest bond strength followed by tribological silica coating with universal adhesive. HF etching with universal adhesive showed the lowest bond strength. CONCLUSION. An improved understanding of the effect of surface treatment of RNC could enhance the durability of resin bonding when used for indirect restorations. When using RNC for restoration, effective and systemic surface roughening methods and an appropriate adhesive are required.

• Journal of the Korean Chemical Society
• /
• v.58 no.6
• /
• pp.600-611
• /
• 2014

In this study, we sampled science writing tasks and investigated their frequency of use shown in the chemistry domain from two sets of 18 middle school science textbooks developed under the 2007 Revised National Curriculum(RNC) and the 2009 RNC, respectively. In addition, we categorized the sampled science writing tasks depending on the cognitive process and type of writing and compared with the results obtained from analysis of global issues presented in the science writings. From the textbooks developed under the 2007 RNC, a total of 183 science writing tasks were identified in which 10.17 tasks per textbook and 1.32 tasks per 10 pages were used averagely. A total of 168 were identified from the textbooks for the 2009 RNC. Among them, 9.33 tasks per textbook and 1.23 tasks per 10 pages were used on average. Comparing with these results, the average frequency of use of the tasks per textbook and per ten pages were decreased, respectively. Moreover, the number of science writing tasks were found in each curriculum varied considerably depending on the units and the publishers, and that the writing tasks were mainly arranged in the finale, wrapping up stage. In the analysis of science writing tasks according to the cognitive process, the highest and lowest frequency of use were observed in the category of 'understand' and 'remember', respectively. According to the classification of science writing tasks based on the types of writing, the writings for the information delivery were most used and the highest frequency of use was observed in the category of 'understand' of the cognitive process belonging to 'information delivery'. As for the results of the analysis of global issues, the number of science writing tasks including global issues increased from 21(11.48%) in the 2007 RNC to 33(19.64%) in the 2009 RNC. Furthermore, science writing tasks associated with protection of environment showed the highest frequency of use in the both curriculums, and it was analyzed that the materials of global issues used in the 2009 RNC were much more diverse.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.264-268
• /
• 2007

This article presents the performance evaluation case study of circuit-switched WCDMA R5MSC(Mobile Switching Center) Server and CS-MGW(Circuit Switched Media Gateway) in 3'rd generation mobile telecommunication (UMTS : Universal Mobile Telecommunication System). The presented work adopted circuit switching scenarios recommended by 3GPP(Third Generation Partnership Project) and terrestrial spectrum calculation parameters and its values defined in ITU-R M.2023 and M.1390 to do the case study on performance evaluation of circuit switched system (R5 MSC Server and CS-MGW) in WCDMA core network. This paper describes test results by using simulator which substitutes for wireless section (MS, Node-B, RNC).

• IE interfaces
• /
• v.14 no.3
• /
• pp.318-325
• /
• 2001

In this paper, we estimate the investment cost for the IMT-2000 services in Korea. The network elements for the IMT-2000 system are drawn out and the required number of base stations(Node-B) is predicted by using the coverage of the base station. With the assumption of the 2-generation mobile communications network configuration, the number of radio network controllers(RNC's) and core network facilities is estimated. We also setup different scenarios by considering the utilization of the transmission facilities between base stations, RNC's and switching systems, and then evaluate the investment cost for each scenario.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.5
• /
• pp.37-50
• /
• 2007

This study investigated the characteristics of spray generated by a liquid coaxial swirl injector used in a combustor of the liquid rocket engine. The linear stability analysis considered long and short wave was introduced in liquid sheet breakup. Through the hydrodynamic analysis the initial liquid sheet thickness spray angle and injection velocity were predicted. To evaluate the effect of turbulence model standard $k-{\varepsilon}$ and RNC $k-{\varepsilon}$ model were applied to numerical calculation and it was known that RNC $k-{\varepsilon}$ model was more applicable to predict spray characteristics. On the basis of this evaluation validation of the developed model was performed with swirl injector installed in LPRE and the predicted results of breakup length, spray angle, and SMD agreed well with experiments qualitatively and quantitatively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.5
• /
• pp.322-326
• /
• 2013

Many organic fruit growers adopt cover cropping in their orchards to improve soil properties. A field experiment was conducted to determine the effects of cutting frequency of cover crop (CF) and liquid manure application (LM) on green manure production (GMP) and returnable nutrient content (RNC) in pear orchard. The combined effects of CF and LM were tested at two levels, respectively, with liquid manure ($L_1$) and without liquid manure ($L_0$). After that, cover crops were cut once ($C_1$) and three times ($C_3$) in rye, and twice ($C_2$) and four times ($C_4$) in hairy vetch. The result showed that main factors related to green manure production were different depending on the species. In rye, LM was more effective in increasing the dry weight of cover crop and RNC than CF. In contrast, the parameters were more affected by CF rather than LM in hairy vetch. Thus, it is suggested that different management technique is needed depending on the cover crop species in order to maximize the green manure production in pear orchard.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.35-43
• /
• 2004

An AAL2 transmission scheme is used to deliver voice and data traffic between Node-B and RNC on 3G WCDMA network. To predict performance of AAL2 multiplexing precisely, we derived analytically bandwidth gain and cell packing density using discrete-time Markov chain model for voice service and validated these results with simulation. We also performed detailed simulation for AAL2 multiplexing in a concentrator. Based on the analytical result, we propose the engineering guideline to select the optimal Timer_CU in a Node-B. We found that there is no major benefit of additional AAL2 multiplexing in a concentrator and the benefit of AAL2 switching in tub for data services is much less than that for voice service.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.8B
• /
• pp.739-746
• /
• 2004

An ATM/AAL2 is standardized to transmit delay sensitive application services, which has small size packet, efficiently. An AAL2 transmission scheme is used to deliver voice and data traffic on the lob interface between base station (Node-B) and Radio Network Controller (RNC) in UMTS network. To predict AAL2 performance, a detailed end-to-end UMTS network performance simulator was developed. We performed detailed simulation(cell packing density and bandwidth gain) for voice and data services in UTRAN. The results indicate that the maximum bandwidth gain in Node-B is about 17% and the bandwidth gain of AAL2 multiplexing in $I_{ub}$ for data services is less than that for voice service. Futhermore, the more offered load increase the more the bandwidth gain decreases in a concentrator.