• Title/Summary/Keyword: RMSE

검색결과 1,804건 처리시간 0.028초

RNN과 LSTM 기반의 PM10 예측 모델 성능 비교 (Performance Comparison of PM10 Prediction Models Based on RNN and LSTM)

  • 정용진;이종성;오창헌
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2021년도 춘계학술대회
    • /
    • pp.280-282
    • /
    • 2021
  • 주관적 판단을 적용하여 예보되는 미세먼지 예보의 문제를 해결하기 위해 딥러닝 알고리즘을 이용하여 미세먼지 예측 모델을 설계하였다. 딥러닝 알고리즘 중 RNN과 LSTM을 이용하였으며, 하이퍼 파라미터 탐색을 통해 최적의 파라미터를 적용하여 설계하였다. RMSE와 예측 정확도를 통해 두 모델의 예측 성능을 평가하였다. 성능 평가 결과, RMSE와 전체 정확도에서 큰 차이는 없었으나 세부 예측 정확도의 차이가 있음을 확인하였다.

  • PDF

고해상도 광학영상과 SAR영상으로부터 생성된 수치표고모델의 정확도 분석 (Accuracy Analysis of DEMs Generated from High Resolution Optical and SAR Images)

  • 김충;이동천;염재홍;이용욱
    • 한국측량학회:학술대회논문집
    • /
    • 한국측량학회 2004년도 춘계학술발표회논문집
    • /
    • pp.337-343
    • /
    • 2004
  • Spatial information could be obtained from spaceborne high resolution optical and synthetic aperture radar(SAR) images. However, some satellite images do not provide physical sensor information instead, rational polynomial coefficients(RPC) are available. The objectives of this study are: (1) 3-dimensional ground coordinates were computed by applying rational function model(RFM) with the RPC for the stereo pair of Ikonos images and their accuracy was evaluated. (2) Interferometric SAR(InSAR) was applied to JERS-1 images to generate DEM and its accuracy was analysis. (3) Quality of the DEM generated automatically also analyzed for different types of terrain in the study site. The overall accuracy was evaluated by comparing with GPS surveying data. The height offset in the RPC was corrected by estimating bias. In consequence, the accuracy was improved. Accuracy of the DEMs generated from InSAR with different selection of GCP was analyzed. In case of the Ikonos images, the results show that the overall RMSE was 0.23327", 0.l1625" and 13.70m in latitude, longitude and height, respectively. The height accuracy was improved after correcting the height offset in the RPC. i.e., RMSE of the height was 1.02m. As for the SAR image, RMSE of the height was 10.50m with optimal selection of GCP. For the different terrain types, the RMSE of the height for urban, forest and flat area was 23.65m, 8.54m, 0.99m, respectively for Ikonos image while the corresponding RMSE was 13.82m, 18.34m, 10.88m, respectively lot SAR image.

  • PDF

심전도 신호의 전력선 잡음 제거를 위한 Deep De-noising Network 설계 (Design of Deep De-nosing Network for Power Line Artifact in Electrocardiogram)

  • 권오윤;이지은;권준환;임성준;유선국
    • 한국멀티미디어학회논문지
    • /
    • 제23권3호
    • /
    • pp.402-411
    • /
    • 2020
  • Power line noise in electrocardiogram signals makes it difficult to diagnose cardiovascular disease. ECG signals without power line noise are needed to increase the accuracy of diagnosis. In this paper, it is proposed DNN(Deep Neural Network) model to remove the power line noise in ECG. The proposed model is learned with noisy ECG, and clean ECG. Performance of the proposed model were performed in various environments(varying amplitude, frequency change, real-time amplitude change). The evaluation used signal-to-noise ratio and root mean square error (RMSE). The difference in evaluation metrics between the noisy ECG signals and the de-noising ECG signals can demonstrate effectiveness as the de-noising model. The proposed DNN model learning result was a decrease in RMSE 0.0224dB and a increase in signal-to-noise ratio 1.048dB. The results performed in various environments showed a decrease in RMSE 1.7672dB and a increase in signal-to-noise ratio 15.1879dB in amplitude changes, a decrease in RMSE 0.0823dB and a increase in signal-to-noise ratio 4.9287dB in frequency changes. Finally, in real-time amplitude changes, RMSE was decreased 0.3886dB and signal-to-noise ratio was increased 11.4536dB. Thus, it was shown that the proposed DNN model can de-noise power line noise in ECG.

디지털항공영상을 이용한 수치지도의 건물레이어 갱신 (Updating Building Layer of Digital Map Using Airborne Digital Camera Image)

  • 황원순;김감래
    • 대한공간정보학회지
    • /
    • 제15권4호
    • /
    • pp.31-39
    • /
    • 2007
  • 최근 국내의 항공디지털카메라 영상의 도입 및 공급이 현실화됨에 따라 정사영상 및 수치지도를 포함한 지리정보제작에 많은 관심이 모아지고 있다. 따라서, 본 연구에서는 항공디지털사진의 정사영상을 제작하여 수치지도를 갱신하는 방법을 제시하고자 하였다. GPS 측량성과를 이용하여 기하보정을 수행하고, 항공 Lidar DEM을 이용하여 정사영상을 제작하였으며, GPS측량성과를 이용하여 절대위치정확도평가, 수치지도의 건물레이어에 대해서는 1/1,000 수치지도를 이용하여 상대위치정확도평가를 수행하였다. 정사영상에 대한 정확도 평가결과, RMSE가 X, Y방향으로 각각 ${\pm}0.076m,\;{\pm}0.294m$가 발생하였으며, 수치지도에 대한 정확도 평가결과, RMSE가 X, Y방향으로 각각 ${\pm}0.250m,\;{\pm}0.210m$이 발생하였으므로, 항공디지털사진의 정사영상을 이용한 수치지도의 건물레이어 갱신결과는 국토지리정보원 규정의 허용오차 이내였으므로, 향후 기본지리정보 구축은 물론 지자체의 GIS사업 및 다양한 분야에 활용할 수 있다.

  • PDF

장애물 위치에 따른 GPS 기준국 측위정확도 변화분석 (An Analysis of GPS Station Positioning Accuracy Variations According to Locations of Obstacles)

  • 손동효;박관동;정완석;기창돈
    • 한국항해항만학회지
    • /
    • 제37권5호
    • /
    • pp.463-469
    • /
    • 2013
  • 이 연구에서는 GPS 기준국 주변에 존재하는 장애물의 방향과 고도각이 좌표 정확도 변화에 미치는 영향을 시뮬레이션을 통해 분석하고자 한다. 최적의 관측환경에 있는 기준국의 정밀좌표를 산출한 뒤 고도각 $10^{\circ}$부터 $70^{\circ}$까지의 장애물이 동, 서, 남 방향에 각각 존재한다고 가정하고 관측자료를 재구성하였다. 10일간의 관측자료를 이용하여 일단위와 시간단위로 각각 처리하였다. 일단위 처리결과에서는 RMSE가 10mm 내외였으나 시간단위 결과에서는 100mm 수준까지 증가하였다. 장애물의 고도각이 높아질수록 수평 및 수직방향 RMSE는 증가하였고 높이 추정값은 감소하였다. 방향에 따른 분석에서는 동쪽이나 서쪽에 장애물이 존재할 때 남북방향에 비해 동서방향으로 위치오차가 더 크게 증가하였고 남쪽 장애물인 경우에는 동서방향의 오차폭이 상대적으로 작게 나타났다.

집계자료를 이용한 미시적 시뮬레이션 모형의 자동정산체계 개발 (도시고속도로사례) (Development of Auto-calibration System for Micro-Simulation Model using Aggregated Data (Case Study of Urban Express))

  • 이호상;이태경;마국준;김영찬;원제무
    • 대한교통학회지
    • /
    • 제29권1호
    • /
    • pp.113-123
    • /
    • 2011
  • 미시적 시뮬레이션 모형은 컴퓨터 성능이 향상되고 정교한 모형이 개발되면서 광역적인 범위까지 적용분야가 점차 확대되고 있다. 현장 교통상황을 정확하게 묘사하기 위해서는 시뮬레이션 모형의 정확한 정산이 매우 중요하다. 국내에서는 거시적 모형에 대한 정산연구는 많이 진행된 반면에 미시적 모형에 대한 정산연구는 매우 부족한 실정이다. 본 연구에서는 유전자알고리즘 이용하여 미시적 시뮬레이션 모형의 파라미터를 자동으로 최적화하는 자동정산 체계를 제시하였다. 내부순환로 지점검지기에서 수집되는 관측교통량과 미시적 시뮬레이션모형(VISSIM)의 교통량 간의 제곱오차(RMSE)를 성능지표로 하고, 최적화 목적함수는 제곱오차를 최소화 하는 것으로 설정하였다. 내부순환로에 적용한 결과, 기본 파라미터에 비해 자동정산체계의 RMSE가 60.4%($19.3{\longrightarrow}7.6$)나 감소하여 매우 효과적인 것으로 나타났다.

HSPF 모형을 이용한 산청 유역의 소유역별 축산비점오염부하량 비중 분석 (Analysis of Livestock Nonpoint Source Pollutant Load Ratio for Each Sub-watershed in Sancheong Watershed using HSPF Model)

  • 김소래;김상민
    • 한국농공학회논문집
    • /
    • 제62권1호
    • /
    • pp.39-50
    • /
    • 2020
  • The objective of this study was to assess the livestock nonpoint source pollutant impact on water quality in Namgang dam watershed using the HSPF (Hydrological Simulation Program-Fortran) model. The input data for the HSPF model was established using the landcover, digital elevation, and watershed and river maps. In order to apply the pollutant load to the HSPF model, the delivery load of the livestock nonpoint source in the Namgang dam watershed was calculated and used as a point pollutant input data for the HSPF model. The hydrologic and water quality parameters of HSPF model were calibrated and validated using the observed runoff data from 2007 to 2015 at Sancheong station. The R2 (Determination Coefficient), RMSE (Root Mean Square Error), NSE (Nash-Sutcliffe efficiency coefficient), and RMAE (Relative Mean Absolute Error) were used to evaluate the model performance. The simulation results for annual mean runoff showed that R2 ranged 0.79~0.81, RMSE 1.91~2.73 mm/day, NSE 0.7~0.71 and RMAE 0.37~0.49 mm/day for daily runoff. The simulation results for annual mean BOD for RMSE ranged 0.99~1.13 mg/L and RMAE 0.49~0.55 mg/L, annual mean TN for RMSE ranged 1.65~1.72 mg/L and RMAE 0.55 mg/L, and annual mean TP for RMSE ranged 0.043~0.055 mg/L and RMAE 0.552~0.570 mg/L. As a result of livestock nonpoint pollutant loading simulation for each sub-watersehd using the HSPF model, the BOD ranged 16.6~163 kg/day, TN ranged 27.5~337 kg/day, TP ranged 1.22~14.1 kg/day.

전지구 파랑 예측시스템의 민감도 분석 (Sensitivity Analysis of Global Wind-Wave Model)

  • 박종숙;강기룡
    • 한국해안·해양공학회논문집
    • /
    • 제24권5호
    • /
    • pp.333-342
    • /
    • 2012
  • 파랑 모델에서 시공간적인 해상도의 변경은 결과에 많은 영향을 끼친다. 본 연구에서는 모델 입력장의 해상도 변경, 파랑 모델의 해상도 변경 그리고 물리적 옵션에 따른 모델의 민감도를 분석하였다. 모델의 분석을 위해서 전지구 부이관측자료와 위성자료를 이용하였다. 고해상도의 입력장을 사용할 경우 유의파고를 과대 산정하는 경향을 보였고, RSME는 약간 감소하였다. 고해상도의 파랑 모델을 수행할 경우 평균편향 및 RMSE가 약간 증가하였다. 또한, 유효 해상풍 계수를 기존의 값인 1.4보다 작게 설정할 경우 편향과 RMSE가 모두 감소하였다.

A Fourier Series Approximation for Deep-water Waves

  • Shin, JangRyong
    • 한국해양공학회지
    • /
    • 제36권2호
    • /
    • pp.101-107
    • /
    • 2022
  • Dean (1965) proposed the use of the root mean square error (RMSE) in the dynamic free surface boundary condition (DFSBC) and kinematic free-surface boundary condition (KFSBC) as an error evaluation criterion for wave theories. There are well known wave theories with RMSE more than 1%, such as Airy theory, Stokes theory, Dean's stream function theory, Fenton's theory, and trochodial theory for deep-water waves. However, none of them can be applied for deep-water breaking waves. The purpose of this study is to provide a closed-form solution for deep-water waves with RMSE less than 1% even for breaking waves. This study is based on a previous study (Shin, 2016), and all flow fields were simplified for deep-water waves. For a closed-form solution, all Fourier series coefficients and all related parameters are presented with Newton's polynomials, which were determined by curve fitting data (Shin, 2016). For verification, a wave in Miche's limit was calculated, and, the profiles, velocities, and the accelerations were compared with those of 5th-order Stokes theory. The results give greater velocities and acceleration than 5th-order Stokes theory, and the wavelength depends on the wave height. The results satisfy the Laplace equation, bottom boundary condition (BBC), and KFSBC, while Stokes theory satisfies only the Laplace equation and BBC. RMSE in DFSBC less than 7.25×10-2% was obtained. The series order of the proposed method is three, but the series order of 5th-order Stokes theory is five. Nevertheless, this study provides less RMSE than 5th-order Stokes theory. As a result, the method is suitable for offshore structural design.

머신러닝 기반 고용량 I-131의 용량 예측 모델에 관한 연구 (A Study on Predictive Modeling of I-131 Radioactivity Based on Machine Learning)

  • 유연욱;이충운;김정수
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제46권2호
    • /
    • pp.131-139
    • /
    • 2023
  • High-dose I-131 used for the treatment of thyroid cancer causes localized exposure among radiology technologists handling it. There is a delay between the calibration date and when the dose of I-131 is administered to a patient. Therefore, it is necessary to directly measure the radioactivity of the administered dose using a dose calibrator. In this study, we attempted to apply machine learning modeling to measured external dose rates from shielded I-131 in order to predict their radioactivity. External dose rates were measured at 1 m, 0.3 m, and 0.1 m distances from a shielded container with the I-131, with a total of 868 sets of measurements taken. For the modeling process, we utilized the hold-out method to partition the data with a 7:3 ratio (609 for the training set:259 for the test set). For the machine learning algorithms, we chose linear regression, decision tree, random forest and XGBoost. To evaluate the models, we calculated root mean square error (RMSE), mean square error (MSE), and mean absolute error (MAE) to evaluate accuracy and R2 to evaluate explanatory power. Evaluation results are as follows. Linear regression (RMSE 268.15, MSE 71901.87, MAE 231.68, R2 0.92), decision tree (RMSE 108.89, MSE 11856.92, MAE 19.24, R2 0.99), random forest (RMSE 8.89, MSE 79.10, MAE 6.55, R2 0.99), XGBoost (RMSE 10.21, MSE 104.22, MAE 7.68, R2 0.99). The random forest model achieved the highest predictive ability. Improving the model's performance in the future is expected to contribute to lowering exposure among radiology technologists.