• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.2046-2050
• /
• 2008

현재까지 우리나라에서 주로 사용되고 있는 2차원 흐름 해석 모형은 미연방 도로국(U.S. Federal Highway Administration)과 연계하여 Brigham Young University에서 개발된 SMS(Surface-Water Modeling System)모형이다. SMS모형 중 이송 확산 모형으로는 RMA-4가 포함되나 이 모형은 최신 수치기법을 반영하지 못하는 등의 문제점들로 인해 실제 물리적 현상을 모의에 있어서 한계를 가지고 있다. 따라서 물리적 현상에 대한 적절한 모의를 위해 여러 개선과정을 거쳐 RAM4가 개발되었다. 본 연구를 위해 점적분 유사량 측정기(P-61)와 대하천 유속계를 사용하여 대상구간의 SS자료 및 유속의 2차원적 분포를 취득하였고, SMS의 Pre-processing 기능을 이용하여 유한요소망을 구성하였다. 구성된 유한요소망과 흐름모형인 RMA-2를 사용하여 대상구간의 유속장을 모의하였다. 이때 모의된 유속장과 현장에서 취득한 유속분포를 비교하여 RMA-2를 검증하였고, SS자료와 RAM4로 모의된 농도장을 비교하여 RAM4를 검증하였다. 검증된 두 모형을 바탕으로 대상 구간에서 다량의 점오염원이 투입되는 가상의 시나리오를 선정 및 적용하여 오염물 이송 및 확산 거동에 대해 살펴보았다. 본 연구의 대상 하천은 형산강으로써, 유역 내에 경주시와 포항시가 위치하고 이 두 도시를 잇는 산업도로가 형산강 본류 위를 지나고, 또한 두 도시를 관류하고 있어 다른 국가하천과 마찬가지로 지속적이고 안정적인 수질관리가 필요한 하천이다, 모의구간은 형산강 본류 중 No. 68(안강 수위관측소 상류 약 350 m)에서 No. 48(부조 수위관측소 하류 약 200 m)까지로서, 약 4.3 km 구간을 모의 하였다. 모의구간 시점에서 약 0.35 km 지점에 산업도로의 일부분인 강동대교, 0.98 km 지점에 왕신천 유입, 1.35 km 지점에 수중보, 1.8 km 지점에 국당1교, 3.2 km 지점에 국당2교가 위치하며 구간 내에는 만곡 및 사행, 특히 수중보 전 후로 사주가 발달해있어 2차원 흐름 및 이송확산 모의에 적합하다고 판단되었다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4B
• /
• pp.343-352
• /
• 2011

The water quantity by intake station as well as the tributary flow discharge acting as sink or source were added to the main flow rate in the present study and RMA-2 and RMA-4 models were applied to the reach from Pal-dang dam to Jam-sil submerged weir to investigate the influence of water supply withdrawal on the river flow and water quality. The numerical results revealed that the water supply withdrawal from 5 intake stations located upstream of Jam-sil submerged weir changed the total flow rate and therby induced different hydraulic characteristics in terms of water surface elevation and velocity. The changed flow field by the inclusion of water intake quantity led to the variation of water quality. By the consideration of the water supply withdrawal, the velocity structure was significantly disturbed by the outflowing flow condition nearby Gu-ui, Ja-yang, and Pung-nap intake stations. Furthermore, the mean velocity was lowered by 25% and the stage upstream of Gu-ui station rose upto 1.5 cm compared with the result by exclusion of water intake. In case of no water withdrawal, the distribution of BOD concentration was parallel throughout the domain. However, when the water withdrawal is considered, the distribution of BOD concentration nearby the Gu-ui, Am-sa, and Ja-yang station was signifiantly changed. In addition, the BOD concentration including the intake stations showed higher value at the downstream of the reach due to the loss of the discharge by water withdrawal effect. It is concluded that both the inflow and outflow discharges from tributaries and water intake stations should be included in the numerical simulation to analyze the hydrodynamic behaviors and mixing characteristics more accurately.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.1
• /
• pp.18-23
• /
• 1999

A numerical model of flow velocity in the standing water system is presented. This model(RMA-2), based on the 2-dimensional unsteady momentum and continuity equations, uses finite element techniques to simulate the distribution of velocity over a spatial location of lakes. The present model represents an improvement over existing numerical water quality models in that it can model the unsteady state and can, therefore, cope with time with a spatial location of standing waters such as lakes and large reservoirs. The model thus allows the engineer to do more accurate estimation of water flows and thus water qualities in standing waters where directions and velocities of the flow become more important for the simulation of the water quality than in running waters. Tests for the data collected in the lake "Paldang" indicates that the model works well under limited circumstances. However, to be more accurate estimation of velocity with the present model, accumulation of data for the measurement of velocities and renovation of geometrical conditions of the lake would be needed.

• Journal of Korea Water Resources Association
• /
• v.37 no.1
• /
• pp.43-54
• /
• 2004

The objective of this study is to propose reservoir operation method in relation to the suspended sediment concentration due to rainstorms. Present analysis is made for the Tamjin reservoir which is under construction. For the hydrologic computations the Huff rainfall distribution, Clark unit hydrograph method and Puls reservoir routing method are used. The variation of suspended sediment concentration is calculated by 2-dimensional RMA-4 model. As a result of this study, the possible intake time from the reservoir under low frequency flood is estimated and the rainfall-ret urn period - possible intake time relationship is established, which is very important in maintaining the water quality standard when supplying water from the reservoir for different utilizationurn period- possible intake time relationship is established, which is very important in maintaining the water quality standard when supplying water from the reservoir for different utilizations.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.289-293
• /
• 2008

In this study, in order to find out the movement of polluted substance that is flown into the river and the characteristics of dispersion, the experiment that used the RI (Radio Isotope) tracer in the river was undertaken, and by using the experiment result, the figure modelling was undertaken to analyze the general type of pollutant dispersion. In addition, in order to calculate more accurate dispersion range and moving time, the experiment was done in about 2km from the measuring points of Namdaecheon around the Yongdam Dam of the upper Geum River to the lower stream, and modeling was undertaken for the 20km zone from the measuring points to the lower stream. In order to find out the flow of river and dispersion of polluted substance, RMA (Resource Modeling Associates)-2 and RMA-4 program are used in study. The site experiment using the RI was implemented for the experiment in the applied area and the same area, and the distance between each zone was set for 1㎞ with the slight difference for site situation and measured the density date of one second distance through the NaI apparatus to measure the density data of one second interval. On the basis of this measured data, it is compared and analyzed with the result of figure copy of RMA-2 and RMA-4 models to make the comparison and analysis of density distribution following the change in expansion coefficient that makes great influence on expansion range and dispersion in natural rivers. The influence of expansion coefficient on river can be researched and the measured density data, the maximum and minimum density time, and the basic data to calculate the expansion coefficient was prepared in this study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2063-2067
• /
• 2009

하천의 효율적 이용에 대한 시민들의 인식 변화로 도시하천의 친수공간에 대한 관심과 이용증가 추세에 따라 도시하천의 수질개선이 필요한 실정이다. 특히 하천유량에 해수가 지배적인 하구가 바다에 접한 감조하천의 경우 해수도수에 의한 하천 수질개선방안들이 강구되고 있다. 따라서 본 연구의 목적은 도시하천에 해수 유입에 따른 하천에의 영향을 분석하기 위해서 수질모의를 통해 수질개선효과를 분석하였다. 본 연구를 위하여 대상하천으로 도시하천이며 감조하천인 부산광역시 소재 동천으로 하였고, 수질모의모형으로 WASP7(Water Quality Analysis Simulation Program Ver, 7)과 RMA-4를 이용하여 수질분석과 대상물질의 이송과 확산을 분석하였다. 현재 동천의 경우 목표수질을 하천수질기준 중 DO 농도를 기준으로 하고 있어 본 연구에서도 DO 농도를 주 분석대상으로 하여 연구를 진행하였다. 동천의 WASP7 모형과 RMA-4 모형을 구축하고 현재 동천의 수질이 목표수질에 도달할 수 있는 적정 해수도수량을 산정하였다. 그리고 효율적인 수질개선을 위하여 도수한 해수를 분배하여 방류하는 방안을 검토하여 적정 분배지점과 적정 분배유량을 산정하였다. 향후의 연구에서는 염도 등 기타 수질항목의 검토가 필요하고, 본 연구에서 수행한 루틴은 다른 하천에서의 해수도수에 의한 수질개선효과 분석에 이용될 수 있을 것이라 판단된다.

• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.16-20
• /
• 2017

Current maintenance system are unable to suggest solid basis of maintenance for roating and static equipment. When a filure occurs, replacement or repair without proper process of failure cause analysis would often result in even greater risk. Therefore in this study, a procedure of Reliability Centred Maintenance is develped in order to perform maintenance in preventive mainer (PM), and to effectively manage risk of any equipment based on failure types and respective rates of failure. Ultimately an equipment with higher risk will be monitored which will lead to effectively prevent and manage any major accident.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.542-550
• /
• 2017

The estimations of flow characteristics and river-bed erosion or sedimentation are very important for hydraulic structure design, floodplain management, and especially, river management. The objective of the study is therefore to estimate the change of flow characteristics and river-bed change due to a hydraulic structure construction. With 11.65 km study area of the Geum River which are located in downstream of Daecheong Dam, flow characteristics and river-bed change were estimated based on the RMA2 and SED2D model. As the result of the study, the increase of river-bed sedimentation in upstream and river-bed erosion in downstream were occurred by the construction of hydraulic structure.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.4 no.3 s.14
• /
• pp.43-50
• /
• 2004

This study had been performed to analyze flushing effects for instantaneous contaminants input with changing dam discharge in River. RMA-2 and RMA-4 models were applied to the downstream part of the Han River(from Jamsil submerged weir to Singok submerged one) The longitudinal dispersion coefficient of $50m^2/s$ was used. The four cases of dam discharges were selected as $500m^3/s,\;1000m^3/s,\;1500m^3/s$ and $2000m^3/s$, respectively, for 1 hour. The drought flow was fixed $200m^3/s$ in the Han River. The arrival time and the concentration of contaminant, the area of dispersion were estimated with RMA-4 model in the downstream part of the Han River. The arrival time which the concentration of contaminants become under 1ppm was analyzed with the stagnant and the instantaneous inflow contaminant at the section of Sungsan Bridge. The more increasing a dam discharge, the more short a dilution time of contaminant. The relation between the dam discharge and dilution time shows linearity. The instantaneous contaminant input was sensitively affected by the dam discharge than the stagnant contaminant one in the river. If it is tried to flush with a temporally increased dam discharge, it should be understood the range of overflowed contaminant dispersion from main channel to tributary channel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1387-1391
• /
• 2007

In this study, water quality prediction that is necessary to water quality forecasting system is performed using 2-D river analysis models RMA-2 and RAM4. RAM4 is suitable to water quality forecasting system cause it is possible to put in the pollutants as a mass type boundary condition. Instant injections of pollutants at Yongdamdaegyo Bridge in Namhangang River are simulated and the behavior of pollutant cloud is observed. The effects of water quality accident to Paldang 2 water intake plants in Paldangho Lake is analyzed with time variation. And extra flow simulation is performed for mitigation of pollution. Several cases of water quality forecasting system at home and abroad are investigated and the direction of water quality forecasting system is presented.