• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.31-33
• /
• 1998

In this paper, the temperature rise within busbar part of high voltage GIS is calculated under the condition that the continuous current is carrying. Heat transfer by conduction and convection is considered between the current carryig conductor and SF6 gas. FLUX 2D which is a commercial electromagnetic and thermal analysis program is used. The results show reasonable temperature distribution.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.387-390
• /
• 2000

The life of transformer is significantly dependent on the thermal behavior in windings. To analyse winding temperature rise, many transformer designer have calculated temperature distribution and hot spot point by finite element method(FEM). Recently, numerical analyses of transformer are studied for optimum design, that is electric field analysis, magnetic field, potential vibration, thermal distribution and thermal stress. Therefore design time and design cost are decreased by numerical analysis. In this paper, the temperature distribution and thermal stress analysis of 50kVA pole cast resin transformer for power distribution are investigated by FEM program. The temperature change according to load rates of transformer also have been investigated. We have carried out temperature rise test and test results are compared with simulation data.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.342-346
• /
• 2006

This paper describes ground surface potential rises and touch voltage. The more soil resistivity of upper layer is lower, the more ground surface potential rise is increased. Ground surface potential rise is increased as the buried depth of ground rod in lowered. Ground surface potential rises were measured in the test site and compared with results by CDEGS program. Touch voltages according to the separation distance of ground rod were measured in four directions. Touch voltages were remarkably changed by separation distance and contact position.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2006.05a
• /
• pp.351-354
• /
• 2006

This paper deals with the potential interferences between ground rod and counterpoise. The ground potential rise and coefficient of potential interference were measured by using the hemispherical water tank grounding simulator and calculated from CDEGS program as functions of the configuration and size of grounding electrodes and the distance between grounding electrodes. The ground potential un and potential interference coefficient strongly depend on the distance between grounding electrodes, the arrangement and size of grounding electrodes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05b
• /
• pp.67-70
• /
• 2011

The effect of column shortening is a major consideration in design and construction of tall buildings, especially in concrete and composite structural systems. To avoid unexpected demage in structural and nonstructural elements, differential shortening between vertical members resulting from differing stress levels, loading histories, volume-to-surface ratios and other factors in a high-rise building must be properly considered in the design process. This paper represents analyzed and measured shortening results of RC cores and columns at the 72 story Haeundae I'Park. It shows that WACS program based on ACI and PCA material model is effective for the prediction of column shortening.

• Research in Community and Public Health Nursing
• /
• v.8 no.1
• /
• pp.21-30
• /
• 1997

The purpose of the study is to establish the nurses engaged in blood donation business right cognition and supply base data to make out proper directed blood donation rule through investigation of actual condition and general issue related to directed blood donation. In this study I searched for related reference and computed the directed blood donors in seoul national university hospital blood bank. The directed blood donation in Korea have been increased for supplying fresh whole blood and plateletpheresis donor blood. The most blood donation in the blood bank belong to hospital are directed blood donation. The benefits of directed blood donation are enlargement blood donor, easy insurance a demand type of blood. But that program also give rise to recipient severe burden, additional cost and confused blood donation system. First of all for lessening the burden of the recipient and the directed blood donor, blood donation site, time, cost and procedure must be repared by proper rules. An alternative plans for the directed blood donation are autologous blood program and donor registration system.

• Journal of computational fluids engineering
• /
• v.7 no.4
• /
• pp.28-34
• /
• 2002

A general purpose program for computing 3-D flows has been extended for two-phase flows with topologically complex interfaces. The 3-D interfaces are tracked by employing a coupled level set and volume-of-fluid (CLSVOF) method which not only can calculate an interfacial curvature accurately but also can achieve mass conservation well. The program has been tested through the computations of bubbles rising in a liquid. The numerical results are found to compare well with the results reported in the literature.

• Korean System Dynamics Review
• /
• v.11 no.3
• /
• pp.33-59
• /
• 2010

South Korea has the defense burdensharing agreement with the United States in reference to the U.S. troops stationed in Korea since 1991, based on Special Measure Agreement(SMA). Due to the growth of Korea's economic power and the U.S. provision of the security environment on Korean penninsula, the U.S. government steadily demanded the rise of contributions to common defense from South Korea and South Korea accepted most of the U.S. requests without proper principles of negotiation concerning the cost sharing. This paper analyzes the systems of the Korea－U.S. cost sharing program through a systems thinking, that yields desirable results with a little effort. The three policy leverages are: 1) the development of negotiation principles; 2) the policy making closely linked with National Defense Reform Basic Plan; 3) the policy making with responsibility burdensharing than cost burdensharing. This paper findings will contribute to the developing the Korea－U.S. cost sharing program by providing policy－makers and policy-practitioners with systematic understanding and insight into the dynamics of the program. Also, this will enable the program to execute more effectively with a concrete formula.

• Structural Engineering and Mechanics
• /
• v.55 no.3
• /
• pp.555-581
• /
• 2015

Triangular pyramid and Quadrangular pyramid elements for partial double-layer spherical reticulated shells of pyramidal system are investigated in the present study. Macro programs for six typical partial double-layer spherical reticulated shells of pyramidal system are compiled by using the ANSYS Parametric Design Language (APDL). Internal force analysis of six spherical reticulated shells is carried out. Distribution regularity of the stress and displacement are studied. A shape optimization program is proposed by adopting the sequence two-stage algorithm (RDQA) in FORTRAN environment based on the characteristics of partial double-layer spherical reticulated shells of pyramidal system and the ideas of discrete variable optimization design. Shape optimization is achieved by considering the objective function of the minimum total steel consumption, global and locality constraints. The shape optimization of six spherical reticulated shells is calculated with the span of 30m~120m and rise to span ratio of 1/7~1/3. The variations of the total steel consumption along with the span and rise to span ratio are discussed with contrast to the results of shape optimization. The optimal combination of main design parameters for six spherical reticulated shells is investigated, i.e., the number of the optimal grids. The results show that: (1) The Kiewitt and Geodesic partial double-layer spherical reticulated shells of triangular pyramidal system should be preferentially adopted in large and medium-span structures. The range of rise to span ratio is from 1/6 to 1/5. (2) The Ribbed and Schwedler partial double-layer spherical reticulated shells of quadrangular pyramidal system should be preferentially adopted in small-span structures. The rise to span ratio should be 1/4. (3) Grids of the six spherical reticulated shells can be optimized after shape optimization and the total steel consumption is optimized to be the least.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.1
• /
• pp.119-128
• /
• 2015

Domestic dominant method in subcontract cost estimate for comprehensive program management is estimation by referencing similar cases or relying on the experience and expertise of the engaged. However, this method is not reliable due to lack of accuracy, making it harder for clients to plan and budget the program. Since budget itself is roughly estimated, it becomes a source of cost rise in the course of management due to design modifications. Therefore, the client and service providers shall calculate more accurate service cost by applying objective and scientific method in order to minimize cost rise and cost related dispute. Traditional cases, in estimating program management cost, took Top-Down approach based on precedents and experience. On the contrary, this study will categorize management structure into phases and activities, issue WBS for each phase to estimated schedule and cost for each code, and take Bottom-UP approach. By taking this approach named ICEP (Integrated Cost Estimate based on Project), Set project typical model will be developed for service cost estimating, calculate cost by applying project-specific factors. Also, by analyzing progress data and allocated management cost to complement them, more efficient construction management will take shape based on program management cost standards which reflect project-specific features.