• Title/Summary/Keyword: RFM모델

Search Result 31, Processing Time 0.023 seconds

Bundle Adjustment of KOMPSAT-3A Strip Based on Rational Function Model (Rational Function Model 기반 KOMPSAT-3A 스트립 번들조정)

  • Yoon, Wansang;Kim, Taejung
    • Korean Journal of Remote Sensing
    • /
    • v.34 no.3
    • /
    • pp.565-578
    • /
    • 2018
  • In this paper, we investigate the feasibility of modelling image strips, instead of individual scenes, that have been acquired from the same orbital pass through the process of bundle adjustments. Under this approach, First, a rational function model (RFM) of the strip image is generated from the RFMs of individual images, such that the entire strip of images can be treated as a single image. Correction parameters are calculated through bundle adjustments between strip images. For the experiment, we used two stereo strips. Each strip image consists of three KOMPSAT-3A scenes. Experimental results show that it was possible to improve the initial model by using the control points located in a specific region of the strip. We showed that absolute orientation with moderate accuracy of 2 m errors were achieved from 12 ground control points for the three-image strips. The test results indicate that bundle adjustment of strip images could be more efficient than bundle adjustments of the individual scenes.

A Study on Analysis of ITU-R Radiowave Propagation Algorithms for Engineering Analysis Function Improvement of Radio-Frequency Management System (ITU-R 전파전파 알고리즘 재분석을 통한 국내 환경에 적합한 전파관리시스템 기능 개선 연구)

  • 김유미;이일근;배석희
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.14 no.1
    • /
    • pp.33-40
    • /
    • 2003
  • Radio frequency management system(RFMS) is being operated to facilitate national spectrum management and monitoring in Korea. To improve the engineering analysis function in RFMS, criteria for the automated selection of the propagation model adequate to the radio station service environment considered are proposed. Those criteria are derived from the specified parameters obtained through the analysis of related ITU-R propagation & diffraction loss models which are to be used in RFMS. Then, using criteria acquired, computer program is made to achieve the automated selection of the most appropriate propagation algorithm, among the ones provided in RFMS, to the environment in which the engineering analysis is required. Furthermore, an illustrative example is shown with the proposals fur increasing the efficiency of the engineering analysis in RFMS.

Collaborative Filtering System using Self-Organizing Map for Web Personalization (자기 조직화 신경망(SOM)을 이용한 협력적 여과 기법의 웹 개인화 시스템에 대한 연구)

  • 강부식
    • Journal of Intelligence and Information Systems
    • /
    • v.9 no.3
    • /
    • pp.117-135
    • /
    • 2003
  • This study is to propose a procedure solving scale problem of traditional collaborative filtering (CF) approach. The CF approach generally uses some similarity measures like correlation coefficient. So, as the user of the Website increases, the complexity of computation increases exponentially. To solve the scale problem, this study suggests a clustering model-based approach using Self-Organizing Map (SOM) and RFM (Recency, Frequency, Momentary) method. SOM clusters users into some user groups. The preference score of each item in a group is computed using RFM method. The items are sorted and stored in their preference score order. If an active user logins in the system, SOM determines a user group according to the user's characteristics. And the system recommends items to the user using the stored information for the group. If the user evaluates the recommended items, the system determines whether it will be updated or not. Experimental results applied to MovieLens dataset show that the proposed method outperforms than the traditional CF method comparatively in the recommendation performance and the computation complexity.

  • PDF

Strategy for Store Management Using SOM Based on RFM (RFM 기반 SOM을 이용한 매장관리 전략 도출)

  • Jeong, Yoon Jeong;Choi, Il Young;Kim, Jae Kyeong;Choi, Ju Choel
    • Journal of Intelligence and Information Systems
    • /
    • v.21 no.2
    • /
    • pp.93-112
    • /
    • 2015
  • Depending on the change in consumer's consumption pattern, existing retail shop has evolved in hypermarket or convenience store offering grocery and daily products mostly. Therefore, it is important to maintain the inventory levels and proper product configuration for effectively utilize the limited space in the retail store and increasing sales. Accordingly, this study proposed proper product configuration and inventory level strategy based on RFM(Recency, Frequency, Monetary) model and SOM(self-organizing map) for manage the retail shop effectively. RFM model is analytic model to analyze customer behaviors based on the past customer's buying activities. And it can differentiates important customers from large data by three variables. R represents recency, which refers to the last purchase of commodities. The latest consuming customer has bigger R. F represents frequency, which refers to the number of transactions in a particular period and M represents monetary, which refers to consumption money amount in a particular period. Thus, RFM method has been known to be a very effective model for customer segmentation. In this study, using a normalized value of the RFM variables, SOM cluster analysis was performed. SOM is regarded as one of the most distinguished artificial neural network models in the unsupervised learning tool space. It is a popular tool for clustering and visualization of high dimensional data in such a way that similar items are grouped spatially close to one another. In particular, it has been successfully applied in various technical fields for finding patterns. In our research, the procedure tries to find sales patterns by analyzing product sales records with Recency, Frequency and Monetary values. And to suggest a business strategy, we conduct the decision tree based on SOM results. To validate the proposed procedure in this study, we adopted the M-mart data collected between 2014.01.01~2014.12.31. Each product get the value of R, F, M, and they are clustered by 9 using SOM. And we also performed three tests using the weekday data, weekend data, whole data in order to analyze the sales pattern change. In order to propose the strategy of each cluster, we examine the criteria of product clustering. The clusters through the SOM can be explained by the characteristics of these clusters of decision trees. As a result, we can suggest the inventory management strategy of each 9 clusters through the suggested procedures of the study. The highest of all three value(R, F, M) cluster's products need to have high level of the inventory as well as to be disposed in a place where it can be increasing customer's path. In contrast, the lowest of all three value(R, F, M) cluster's products need to have low level of inventory as well as to be disposed in a place where visibility is low. The highest R value cluster's products is usually new releases products, and need to be placed on the front of the store. And, manager should decrease inventory levels gradually in the highest F value cluster's products purchased in the past. Because, we assume that cluster has lower R value and the M value than the average value of good. And it can be deduced that product are sold poorly in recent days and total sales also will be lower than the frequency. The procedure presented in this study is expected to contribute to raising the profitability of the retail store. The paper is organized as follows. The second chapter briefly reviews the literature related to this study. The third chapter suggests procedures for research proposals, and the fourth chapter applied suggested procedure using the actual product sales data. Finally, the fifth chapter described the conclusion of the study and further research.

Epipolar Resampling for High Resolution Satellite Imagery Based on Parallel Projection (평행투영 기반의 고해상도 위성영상 에피폴라 재배열)

  • Noh, Myoung-Jong;Cho, Woo-Sug;Chang, Hwi-Jeong;Jeong, Ji-Yeon
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.15 no.4
    • /
    • pp.81-88
    • /
    • 2007
  • The geometry of satellite image captured by linear CCD sensor is different from that of frame camera image. The fact that the exterior orientation parameters for satellite image with linear CCD sensor varies from scan line by scan line, causes the difference of image geometry between frame and linear CCD sensor. Therefore, we need the epipolar geometry for linear CCD image which differs from that of frame camera image. In this paper, we proposed a method of resampling linear CCD satellite image in epipolar geometry under the assumption that image is not formed in perspective projection but in parallel projection, and the sensor model is a 2D affine sensor model based on parallel projection. For the experiment, IKONOS stereo images, which are high resolution linear CCD images, were used and tested. As results, the spatial accuracy of 2D affine sensor model is investigated and the accuracy of epipolar resampled image with RFM was presented.

  • PDF

Transcriptome Profiling of Kidney Tissue from FGS/kist Mice, the Korean Animal Model of Focal Segmental Glomerulosclerosis (국소성 분절성 사구체 신병증의 동물 모델 (FGS/kist 생쥐) 신 조직의 유전자 발현 양상)

  • Kang, Hee-Gyung;Lee, Byong-Sop;Lee, Chul-Ho;Ha, Il-Soo;Cheong, Hae-Il;Choi, Yong
    • Childhood Kidney Diseases
    • /
    • v.15 no.1
    • /
    • pp.38-48
    • /
    • 2011
  • Purpose: Focal segmental glomerulosclerosis (FSGS) is the most common glomerulopathy causing pediatric renal failure. Since specific treatment targeting the etiology and pathophysiology of primary FSGS is yet elusive, the authors explored the pathophysiology of FSGS by transcriptome analysis of the disease using an animal model. Methods: FGS/kist strain, a mouse model of primary FSGS, and RFM/kist strain, as control and the parent strain of FGS/kist, were used. Kidney tissues were harvested and isolated renal cortex was used to extract mRNA, which was run on AB 1700 mouse microarray chip after reverse transcription to get the transcriptome profile. Results: Sixty two genes were differentially expressed in FGS/kist kidney tissue compared to the control. Those genes were related to cell cycle/cell death, immune reaction, and lipid metabolism/vasculopathy, and the key molecules of their networks were TNF, IL-6/4, IFN${\gamma}$, TP53, and PPAR${\gamma}$. Conclusion: This study confirmed that renal cell death, immune system activation with subsequent fibrosis, and lipid metabolism-related early vasculopathy were involved in the pathophysiology of FSGS. In addition, the relevance of methodology used in this study, namely transcriptome profiling, and Korean animal model of FGS/kist was validated. Further study would reveal novel pathophysiology of FSGS for new therapeutic targets.

DEM Generation and Accuracy Comparison from Multiple Kompsat-2 Images (다중 Kompsat-2 영상으로부터 생성된 DEM 정확도 분석)

  • Rhee, Soo-Ahm;Jeong, Jae-Hoon;Lee, Tae-Yoon;Kim, Tae-Jung
    • Korean Journal of Remote Sensing
    • /
    • v.27 no.1
    • /
    • pp.51-58
    • /
    • 2011
  • Accurate DEM(Digital Elevation Model) generation using satellite images is an active research topic. This paper focuses on generation of a DEM with multiple Kompsat-2 images. For DEM generation, we applied an orbit-attitude sensor model and a RPM sensor model to stereo and multiple Kompsat-2 images respectively. For matching, we used an object-space based matching method. Through the result of this experiment, we could confirm that the sensor model from multiple images is more accurate than the model from stereo images. Also DEM from multiple images gave much better performance than DEM from stereo images.

Accuracy Assessment of 3D Geopositioning of KOMPSAT-2 Images Using Orbit-Attitude Model (KOMPSAT-2 영상의 정밀궤도기반모델을 이용한 3차원 위치결정 정확도 평가)

  • Lee, Sang-Jin;Kim, Jung-Uk;Choi, Yun-Soo;Jung, Seung-Kyoon
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.18 no.4
    • /
    • pp.3-10
    • /
    • 2010
  • In this study, the orbit-based sensor modeling is applied to the digital plotting and the accuracy of digital plotting is analyzed. The KOMPSAT-2 satellite image with orbit-attitude model is used for the analysis. The precise sensor modeling with various combination of parameters is performed for the stereo satellite image. In addition, we analyze the error range of ground control points by applying the result of stereo modeling to digital survey system. According to the result, it is possible to produce digital map using stereo image with a small number of GCPs when the orbit-based sensor modeling for KOMPSAT-2 is applied. This means that it is suitable for the generation of digital map on a scale of 1/5,000 to 1/25,000 considering the resolution of KOMPSAT-2 image.

A study on Radiowave Interference Analysis Algorithms for Enhancement of Radio-Frequency Management System (전파 분석 알고리즘 및 전파 간섭 분석 기준 연구를 통한 전파 관리 시스템 기능 강화 방안 도출)

  • Kim, Yu-Mi;Rhee, Ill-Keun;Bae, Suk-Hee
    • Journal of IKEEE
    • /
    • v.7 no.2 s.13
    • /
    • pp.281-287
    • /
    • 2003
  • This paper proposed an improvement scheme for effective usage of radio-frequency management system(RFMS), which has been operated to facilitate national spectrum management and monitoring in Korea. Based on the wave propagation models, interference analysis algorithms, and sharing criteria recommended by ITU-R, we derived criteria for the automated selection of the channel interference analysis algorithms and sharing conditions adequate to the environment to be analysed. Then using the obtained criteria, computer and program has been made and shown to select the most appropriate propagation models, interference analysis algorithms, and sharing criteria from the ones provided in RFMS, with the illustrative example.

  • PDF

Implemental Model of Customer Relationship Management System for Oriental Hospital Using Customer Segmentation (고객세분화를 통한 한방병원 고객관계관리 시스템 구축모형)

  • Ahn, Yo-Chan
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.15 no.5
    • /
    • pp.79-87
    • /
    • 2010
  • This paper is proposed that implemental model of customer relationship management system for oriental hospital is designed by customer segmentation using personal information and medical record of outpatients in existing integrated medical information system database. Proposed model can be practical model at once, because it can construct by partial modification of existing medical information system without additional information technology and infrastructure. And, if we use the proper variable and method of customer segmentation according to marketing strategy, it can be flexible customer relationship management system not only improvement of customer satisfaction but also various marketing supports.