• 제목/요약/키워드: RFID tags

검색결과 570건 처리시간 0.019초

Randomized Scheme for Cognizing Tags in RFID Networks and Its Optimization

  • Choi, Cheon Won
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권4호
    • /
    • pp.1674-1692
    • /
    • 2018
  • An RFID network is a network in which a reader inquire about the identities of tags and tags respond with their identities to a reader. The diversity of RFID networks has brought about many applications including an inexpensive system where a single reader supports a small number of tags. Such a system needs a tag cognizance scheme that is able to arbitrate among contending tags as well as is simple enough. In this paper, confining our attention to a clan of simple schemes, we propose a randomized scheme with aiming at enhancing the tag cognizance rate than a conventional scheme. Then, we derive an exact expression for the cognizance rate attained by the randomized scheme. Unfortunately, the exact expression is not so tractable as to optimize the randomized scheme. As an alternative way, we develop an upper bound on the tag cognizance rate. In a closed form, we then obtain a nearly optimal value for a key design parameter, which maximizes the upper bound. Numerical examples confirm that the randomized scheme is able to dominate the conventional scheme in cognizance rate by employing a nearly optimal value. Furthermore, they reveal that the randomized scheme is robust to the fallacy that the reader believes or guesses a wrong number of neighboring tags.

MRCT: An Efficient Tag Identification Protocol in RFID Systems with Capture Effect

  • Choi, Sunwoong;Choi, Jaehyuk;Yoo, Joon
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제7권7호
    • /
    • pp.1624-1637
    • /
    • 2013
  • In RFID systems, one important issue is how to effectively address tag collision, which occurs when multiple tags reply simultaneously to a reader, so that all the tags are correctly identified. However, most existing anti-collision protocols assume isotropic collisions where a reader cannot detect any of the tags from the collided signals. In practice, this assumption turns out to be too pessimistic since the capture effect may take place, in which the reader considers the strongest signal as a successful transmission and the others as interference. In this case, the reader disregards the other collided tags, and in turn, fails to read the tag(s) with weaker signal(s). In this paper, we propose a capture effect-aware anti-collision protocol, called Multi-Round Collision Tree (MRCT) protocol, which efficiently identifies the tags in real RFID environments. MRCT deals with the capture effect as well as channel error by employing a multi-round based identification algorithm. We also analyze the performance of MRCT in terms of the number of slots required for identifying all tags. The simulation results show that MRCT significantly outperforms the existing protocol especially in a practical environment where the capture effect occurs.

고속 UHF RFID 태그 검사 장비를 위한 전용 리더 (A Specialized Reader for High Speed UHF RFID Tag Inlay Inspection Equipment)

  • 배성우;박준석;성영락;오하령
    • 전기학회논문지
    • /
    • 제63권1호
    • /
    • pp.63-69
    • /
    • 2014
  • RFIDs have not become widespread as expected partly due to the cost, size, read range, and reliability problems of tags. The success rate of reading must be improved in order for RFIDs to be widely adopted. Quality control of tags is crucial to meet this requirement. In this study, we designed and implemented a high-performance reader used in inspection equipment that conducts prior inspection of tags. To improve performance of the developed reader, the baseband modem and command processor (CP) were designed using H/W logic and implemented with FPGA. The inspection of small pitch inlays was made possible through the antenna shielding device and H/W command processor function. This equipment enables accurate evaluation of performance and identification of tags satisfying a given read range. By contributing to sort out defective tags, the results can ultimately lead to more stable RFID services.

Fair Identification Scheme for STAC Protocol in 13.56MHz RFID Systems

  • Lim, In-Taek
    • Journal of information and communication convergence engineering
    • /
    • 제9권3호
    • /
    • pp.260-265
    • /
    • 2011
  • In RFID System, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred to anti-collision algorithm. In 13.56MHz RFID system, STAC protocol is defined as an anti-collision algorithm for multiple tag reading. In STAC protocol, there is no differentiation between the collided tags and others in the identification process. Therefore, tags may never be successfully identified because its responses may always collide with others. This situation may cause the tag starvation problem. This paper proposes a fair identification scheme for STAC protocol. In the proposed scheme, if the number of collided slots is large during a query round, the reader broadcasts a CollisionRound command to begin a collision round. During the collision round, the reader identifies only tags that are experienced collision during the previous query round.

군 계급장 UHF RFID 태그를 이용한 군 보안출입관리 시스템 (Military Entrance Control System Using Military Insignia UHF RFID Tags)

  • 남세현;정유정
    • 한국통신학회논문지
    • /
    • 제38C권11호
    • /
    • pp.966-971
    • /
    • 2013
  • 본 논문에서는 군 계급장 자체를 UHF RFID 태그로 개발하는 과정과, 그 태그를 사용하여 보안을 강화한 군 보안출입관리 시스템을 보여준다. 일반적으로 군보안 출입관리 지역에서 저주파 HF 대역의 RFID 태그가 붙어있는 신분증으로 보안을 점검 관리하고 있으나, 한 단계 보안강화를 위하여 계급장 자체를 태그화 하여서 신분증과 계급장의 태그를 인식함으로서 강화된 보안 체계가 갖추어진 출입관리시스템을 구축 하였다. 개발된 태그는 모자나 어께에 붙일 수 있는 형태의 금속성 일반 계급장 자체를 모델화하여서 UHF RFID 태그로 설계 하였다. 군 보안출입관리시스템은 개발된 태그를 사용하여 출입자의 성명, 계급, 주소지 등을 관리 할 수 있으며, 출입한 날짜와 시간을 계속적으로 누적 관리 할 수 있어서 어느 군인이 언제 보안지역을 출입을 했었는지 과거 내역 조회가 가능하다.

충돌방지 알고리즘의 보안 견고성 (Security Robustness of Tree based Anti-collision Algorithms)

  • 서현곤;김향미
    • 대한전자공학회논문지TC
    • /
    • 제47권1호
    • /
    • pp.99-108
    • /
    • 2010
  • RFID(Radio Frequency IDentification) 기술은 RF신호를 사용하여 물품에 부착된 전자태그를 식별하는 비접촉 기술이다. RFID 리더의 식별 영역 내에 여러 개의 태그가 있는 경우 이들 사이의 충돌(collision)이 발생되기 때문에 이들을 식별할 수 있는 메커니즘이 필요하다. 다중 태그 식별 문제는 RFID 기술 중에서도 핵심이며, 이 문제는 충돌방지(anti-collision) 알고리즘을 통하여 해결할 수 있다. 하지만 RFID 시스템의 또 다른 문제는 정보보호이다. 태그는 리더의 쿼리에 매우 쉽게 응답하기 때문에 태그의 정보 노출에 따른 사용자 프라이버시 침해 문제가 발생한다. 이러한 점에서 RFID 기술은 외부로부터 스니핑(sniffing)에 매우 취약하다. 본 논문에서는 기존에 제안된 트리 기반 메모리래스 알고리즘인 트리-워킹 알고리즘, 쿼리 트리알고리즘, 향상된 쿼리 트리 알고리즘 등의 보안 견고성에 대하여 살펴본다.

UML과 LVOOP를 활용한 RFID 불량 검출 시스템의 구현 (The Implementation of the Detection System of RFID Defective Tags Using UML and LabVIEW OOP)

  • 정민포;조혁규;정덕길
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 추계학술대회
    • /
    • pp.382-386
    • /
    • 2011
  • RFID 태그 생산 분야에서 RFID 칩 본딩 과정 이후에 RFID 태그 불량 검출 기능을 수행하는 불량 검출 시스템 개발이 요구되어 왔다. 그러나 RFID 태그의 특징을 이해하면서 제대로 된 설계 개념을 가지고 구현된 시스템을 설계하기가 어렵고 사소한 기능의 변화에도 시스템을 처음부터 설계를 해야 하는 어려움이 있었다. 이 논문에서는 RFID 태그 불량 검출 기능을 수행하는 불량검출 시스템을 UML을 이용하여 객체지향 기법으로 설계하고 UML로 설계된 모델링을 객체지향을 지원하는 비주얼 언어인 LabVIEW OOP로 적용하는 방법을 제시한다. UML과 LabVIEW OOP로 설계되고 구현된 불량검출 시스템에 대한 성능과 시스템의 기능 변화에 따른 재설계 기법에 대한 기법도 제안한다.

  • PDF

골드 코드 기반의 RFID 간섭제거 시스템 성능분석 (Performance Analysis of RFID Interference Suppression System Based on the Gold Code)

  • 카드카 그리쉬마;황석승
    • 한국전자통신학회논문지
    • /
    • 제8권10호
    • /
    • pp.1491-1497
    • /
    • 2013
  • RFID(Radio Freqeuncy Identification)는 무선통신 기술과 모바일 컴퓨팅 환경이 발전함에 따라 유비쿼터스 컴퓨팅의 중요하고 필수적인 요소로 자리 잡았고, 특정 사물에 대한 빠른 처리나 식별을 돕기 위해 주요하게 사용되고 있다. 일반적으로, 다수개의 태그들이 근접하게 분포되어 있고, 휴대용 RFID 수신기를 사용할 시 각 태그들에 의한 간섭들이 존재하게 된다. 본 논문은 다수개의 태그들이 단일 RFID 리더 인식범위에 동시에 존재할 시 간섭들의 영향을 최소화 할 수 있는 RFID 시스템을 고려한다. 좁은 지역에 많은 태그들이 부착된 물체들이 존재할 수 있는데, 이 경우 다수개의 RFID 태그들은 서로에게 간섭으로 작용할 수 있고, 이로 인해 RFID 시스템의 데이터 신뢰도 및 효율성이 저하될 수 있다. 다수개의 인접한 태그들로 부터의 간섭신호를 억제하기 위해 본 논문은 확산대역 기술을 사용하는 골드코드를 조사, 분석하여 RFID 시스템에 적용시키는 것을 목적으로 한다. 이 RFID 시스템에서 데이터 비트들은 각 태그들에서 고유의 골드코드로 확산되고, 확산된 데이터 비트들은 리더에서 같은 골드코드에 의해 역확산 된다. 고려된 RFID 간섭제거 시스템의 성능분석은 컴퓨터 시뮬레이션을 통하여 확인된다.

RFID 기술을 이용한 한약재 이력관리 방안에 관한 연구 (A study of plan for traceability of a Korean herb using RFID technology)

  • 김철;송미영
    • 한국한의학연구원논문집
    • /
    • 제12권3호통권18호
    • /
    • pp.31-47
    • /
    • 2006
  • Nowadays Korean governments use Information Technology to improve the quality of life for a people. One of these tries is building the Food Tracing System based on Information Technology. Koreans have big concern about food that is good for health. The Food Tracing System means that the system can follows, traces, and records every steps of production and delivery of food and its ingredient. And this process should be identified and grouped by using tags, marks, and other methods. For example, producer of ingredient, processing steps of food, delivered place could be traced. In addition to food, medical herbs need consumer's trust in production and delivery. To trace and prosecute contaminated medical herbs, medical herbs also need this kind of Tracing System based on Information Technology. This study shows current medical herbs tracing ways and RFID(Radio Frequency IDentification) technology trend. As preceding study for future RFID based medical herbs tracing system, this study suggests the building plan and scenario of the Medical Herbs Tracing System. The determination of the main body for sticking RFID Tags is very important to design for RFID Traceability System. In this study, the starting point of information to medical herbs is an inspection agency. The Medical Herbs to product domestically or import moved to an inspection agency. An inspection agency bond the RFID Tags to packing of the Medical Herbs after examining the a basic its component. At the same time inspector give the information of production or importation to the Tags. This Tags are moved for logistical process to end point, the Korean medicine agency. The customer confirmed the traceability and certification information of the Medical Herbs. For success tracing of medical herbs, institutional support and close cooperation between related organizations is necessary besides good system design.

  • PDF

RFID 태그 생산 공정 자동화를 위한 부적합품의 자동 검출 및 EPC Code Auto-Writing 알고리즘 개발 (The development of an EPC Code Auto-Writing and Fault Detection Algorithm for Manufacturing Process of a RFID TAG)

  • 정민포;황건용;조혁규;이원열;정덕길;안귀임;박영식;장시웅
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.321-325
    • /
    • 2009
  • 국내의 RFID 태그 생산업체의 대부분은 칩 본딩 작업 후에 태그 불량 검출을 수작업으로 이루어 지기 때문에 태그 생산의 시간과 비용을 감소시키기 위한 요구가 산업계에서 요구되어 왔다. 이에 따라 이 논문에서는 칩 본딩 과정 이후에 태그 불량 검출 기능을 수행하는 시스템을 설계 및 개발하여 산업 현장에서 요구되는 RFID 태그 불량 검출 자동화 시스템을 구축할 수 있는 소프트웨어 분야의 기초 기반 기술을 제공한다. 개발된 시스템은 태그 불량 검출 작업을 수작업을 처리하는 방법과 비교하여, 처리속도는 700%이상의 성능 향상과 불량검출에 대한 100% 인식률을 보여준다.

  • PDF