• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.3
• /
• pp.258-272
• /
• 2010

The low-rate (LR) UWB is a promising technology for the ubiquitous sensor network (USN) due to its extremely low power consumption and simple transceiver implementation. However the limited communication range is a bottleneck for its widespread use. This paper deals with a new frame structure of class 4 active RFID multi-hop relay system based on ISO/IEC 18000-7 standard integrating with IEEE 802.15.4a LR-UWB PHY layer specification, which sets up a connection to USN. As a result of the vital importance of the coverage and throughput in the application of USN, further we analyze the performance of the proposed system considered both impulse radio UWB (IR-UWB) and chirp spread spectrum (CSS). Our simulation results show that the coverage and throughput are remarkably increased.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.307-311
• /
• 2010

EPCglobal Class-1 Gen-2 protocol has been proposed for UHF-band RFID systems. In Gen-2 standard, Q-algorithm was proposed to select a frame size for the next query round without estimating the number of tags. Therefore, the Q-algorithm has advantage that the reader's algorithm is simpler than other algorithms. However, it is impossible to allocate the optimized frame size. Also, the original Q-algorithm did not define an optimized parameter C for adjusting the frame size. In this paper, we propose an adaptive Q-algorithm with the different parameter $C_c$ and $C_i$ in accordance with the status of reply slot. Simulation results show that the proposed adaptive Q-algorithm outperforms the original Gen-2 Q-algorithm.

• Journal of information and communication convergence engineering
• /
• v.8 no.5
• /
• pp.519-523
• /
• 2010

In Gen-2 RFID system, the initial value of $Q_{fp}$, which is the slot-count parameter of Q-algorithm, is not defined in the standard. In this case, if the number of tags within the reader's identification range is small and we let the initial $Q_{fp}$ be large, the number of empty slot will be large. On the other hand, if we let the initial $Q_{fp}$ be small in spite of many tags, almost all the slots will be collided. As a result, the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we propose a scheme to allocate the optimal initial $Q_{fp}$ through the tag number estimation before the query round begins. Through computer simulations, it is demonstrated that the proposed scheme achieves more stable performance than Gen-2 Q-algorithm.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.529-531
• /
• 2011

In Gen-2 Q-algorithm, the values of weight C, which is the parameter for incrementing or decrementing the slot-count size, are not defined in the standard. In this case, if the reader selects an inappropriate weight, there are a lot of empty or collided slots. As a result, the performance will be degraded because the frame size does not converge to the optimal point quickly during the query round. In this paper, we analyze how the performances of Gen-2 Q-algorithm will be affected by the weight value.

• Proceedings of the KIEE Conference
• /
• 2007.10a
• /
• pp.191-192
• /
• 2007

This paper presents a 900MHz fractional-N frequency synthesizer for radio frequency identification (RFID) reader using $0.18{\mu}m$ standard CMOS process. The IC meets the EPC Class-1 Generation-2 and ISO-18000 Type-C standards. To minimize VCO pulling, the 900MHz VCO is generated by a 1.8GHz VCO followed by a frequency divider. The settling time of the synthesizer is less than $20{\mu}m$. The frequency synthesizer achieves the phase noise of -105.6dBc/Hz at 200kHz offset. The frequency synthesizer occupies an area of $1.8{\times}0.99mm^2$, and dissipates 8mA from a low supply voltage of 1.8V.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1222-1232
• /
• 2011

RFID/USN core technologies for ubiquitous computing, It is possible to use variety of sensors, direct processors, and wireless network technology that easily collect the actual physical environment and can monitor information remotely. Especially the healthcare industry and services combined with U-Healthcare that have international competitiveness in the medical field. But the USN, standard management system of RFID such as EPCglobal architecture framework, the lack of interoperability issues and the global sensor network implementation. In this paper, a system for managing sensor nodes of the USN, USN of SIP-based management system (UMS) is proposed. UMS support Session Initiation Protocol (SIP), provide session management and mobility capabilities, that is based on Internet standard protocol. UMS architecture of the existing SIP architecture, added USN User Agent (UUA) and the USN Name Server (UNS) that the location of sensor nodes should be possible to trace. UUA on behalf of the limited capacity of the location of the sensor nodes to perform the registration process, UNS to track the location of the sensor nodes to provide name resolution services. The proposed management system has the advantage of internet applications such as Web services interoperability and easy to recycle existing resources with other SIP-based because it uses the Internet standard protocol SIP. In this paper we propose is based on the UMS blood temperature management system is verified through the scenario.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.10-19
• /
• 2007

In this paper, Class-1 Air-interface protocols of EPCglobal applied to RFID system in UHF band are analyzed, and the standard anticollision algorithms are realized. Also, the improved anticollision algorithms of the Class-1 Generation-1 and Generation-2 protocol are proposed and the performances of anticollision algorithms are compared. As the results, reduction ratio of total tag recognition time of the improved Generation-1 algorithm is 54.5% for 100 tags and 63.4% for 1000 tags with respect to standard algorithm, respectively. And the reduction ratio of the improved Generation-2 algorithm is 7.9% for 100 tags and 11.7% for 1000 tags. Total recognition times of the improved algorithms are shorter than those of standard algorithms according to increasing the number of tag. Therefore, the improved anticollision algorithm proposed in this paper is the advanced method improving the performance of tag recognition in the RFID system.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.221-227
• /
• 2013

RFID is an automatic identification technology that can control a range of information via IC chips and radio communication. Also known as electronic tags, smart tags or electronic labels, RFID technology enables embedding the overall process from production to sales in an ultra-small IC chip and tracking down such information using radio frequencies. Currently, RFID-based application and development is in progress in such fields as health care, national defense, logistics and security. RFID structure consists of a reader that reads tag information, a tag that provides information and the database that manages data. Yet, the wireless section between the reader and the tag is vulnerable to security issues. To sort out the vulnerability, studies on security protocols have been conducted actively. However, due to difficulties in implementation, most suggestions are concerned with theorem proving, which is prone to vulnerability found by other investigators later on, ending up in many troubles with applicability in practice. To experimentally test the security of the protocol proposed here, the formal verification tool, CasperFDR was used. To sum up, the proposed protocol was found to be secure against diverse attacks. That is, the proposed protocol meets the safety standard against new types of attacks and ensures security when applied to real tags in the future.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.8 s.350
• /
• pp.35-46
• /
• 2006

When an RFID reader attempts to read the tags, interference might occur if the neighboring readers also attempt to communicate with the same tag at the same time or the neighboring readers use the same frequency simultaneously. These interferences cause the RFID reader collision. When the RFID reader collision occurs, either the command from the reader cannot be transmitted to the tags or the response of the tags cannot receive to the reader correctly, Therefore, the international standard for RFID and some papers proposed the methods to reduce the reader collision. Among those, Colorwave and Enhanced Colorwave is the reader anti-collision algorithm using the frame slotted ALOHA based a TDM(Time Division Multiplex) and are able to reduce the reader collision because theses change the frame size according to a collision probability. However, these can generate the reader collisions or interrupt the tag reading of other readers because the reader that collides with another reader randomly chooses a new slot in the frame. In this paper, we propose a new RFID reader anti-collision algorithm that each reader monitors the slots in the frame and chooses the slot having the minimum occupation probability when the reader collision occurs. Then we analyze the performance of the proposed algorithm using simulation tool.

• Journal of KIISE:Databases
• /
• v.36 no.2
• /
• pp.112-122
• /
• 2009

The EPCglobal leading the development in RFID standards proposed Event Cycle Specification (ECSpec) and Event Cycle Reports (ECReports) for the standard about RFID middleware interface. ECSpec is a specification for filtering and collecting RFID tag data and is treated as a Continuous Query (CQ) processed during fixed time intervals repeatedly. ECReport is a specification for describing the results after ECSpec is processed. Thus, it is efficient to apply Query Indexing technique designed for the continuous query processing. This query index processes ECSpecs as data and tag events as queries for efficiency. In logistics environment, the similar or same products are transferred together. Also, when RFID tags attached to the products are acquired, the acquisition events occur massively for the short period. For these properties, it is inefficient to process the massive events one by one. In this paper, we propose a technique reducing similar search process by considering tag events which are collected by the report period in ECSpec, as a range query. For this group processing, we suggest a queuing method for collecting tag events efficiently and a structure for generating range queries in the queues. The experiments show that performance is enhanced by the proposed methods.