• 한국통신학회논문지
• /
• 제36권1A호
• /
• pp.41-48
• /
• 2011

This paper proposes an efficient code acquisition scheme for direct-sequence spread spectrum (DSSS) based real-time locating systems (RTLS). The proposed scheme employs multiple bit integration to significantly decrease false alarms when no packet signal is transmitted and increase the detection probability when the RTLS tags are excited. The performance of the proposed code acquisition scheme is analyzed and numerically evaluated, and compared with those of single-dwell and traditional double-dwell code acquisition schemes. The simulation results show that the proposed multiple-bit integration scheme outperforms single-dwell and double-dwell schemes.

• Journal of electromagnetic engineering and science
• /
• 제16권4호
• /
• pp.206-209
• /
• 2016

This letter proposes a reconfigurable directional coupler that uses a variable impedance mismatch reflector to achieve high isolation characteristics in the antenna front end. The reconfigurable coupler consists of a directional coupler and a single-pole four-throw (SP4T) switch with different load impedances as a variable load mismatch reflector. Selection of the load impedance by the reflector allows cancellation of the reflected signal due to antenna load mismatch and the leakage from the input to isolation port of the directional coupler, resulting in high isolation characteristics. The performance of the proposed architecture in separating the received (Rx) signal from the transmitted (Tx) signal in the antenna front end was verified by implementing and testing the reconfigurable coupler at 917 MHz for UHF radio-frequency identification (RFID) applications. The proposed reconfigurable directional coupler showed an improvement in the isolation characteristics of more than 20 dB at the operation frequency band.

• Journal of information and communication convergence engineering
• /
• 제9권2호
• /
• pp.172-176
• /
• 2011

In the Gen-2 Q-algorithm, the values of weight C, which is the parameter for incrementing or decrementing the slot-count size, are not optimized in the standard. However, the standard suggests that the reader uses small values of C when the slot-count is large and larger values of C when the slot-count is small. In this case, if the reader selects an inappropriate weight, there are a lot of empty or collided slots. As a result, the performance will be declined because the frame size does not converge to the optimal point quickly during the query round. In this paper, we propose a scheme to select the weight based on the slot-count size of current query round. Through various computer simulations, it is demonstrated that the proposed scheme achieves more stable performances than Gen-2 Q-algorithm.

• 한국멀티미디어학회:학술대회논문집
• /
• 한국멀티미디어학회 2012년도 춘계학술발표대회논문집
• /
• pp.113-115
• /
• 2012

스마트폰은 다양한 서비스를 위한 기술이 집약되어 있으며 그 중 NFC(근거리 무선 통신) 기술은 기존의 모바일 RFID 기술보다 진일보하여 태그 읽기/쓰기 기능을 비롯하여 모바일 결제에 이르기까지 활용 범위가 매우 넓다. 이러한 NFC 기술을 활용한 안드로이드 어플리케이션의 구동에 있어 실시간 처리의 효율성은 서비스의 안정성에 크게 영향을 미친다. 따라서 안드로이드 플랫폼에서 보다 안정적인 실시간 서비스 실행을 위해 기존 안드로이드 실시간 처리 영역인 Dalvik VM의 동적 컴파일 메커니즘과 현재 발표되어 있는 개선된 방식의 메커니즘을 분석 정리하고자 한다. 또한 이를 바탕으로 향후 스마트 폰의 NFC 구동에 있어 Dalvik VM의 보다 최적화된 컴파일 방식을 제안할 수 있도록 연구하고자 한다.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1917-1922
• /
• 2010

Near-Field Communication (NFC) is a short-range wireless communication technology evolved from RFID especially for the exchange of data between active and passive devices. This paper presents the mathematical models for the signal path of a NFC transceiver system and a behavioral simulation platform using MATLAB simulink. The approximated mathematical models simplify the simulation complexity of a transceiver and provide a quick evaluation. With this calculation platform, we can evaluate the system performance caused by the noise and the non-linearity of the individual blocks, and caused by system variables such as Effective Number of Bits (ENOB) of ADC and filter cutoff frequency. This platform provides us with a rapid prototyping, a reliable system design, and an efficient risk management during development of the NFC transceiver ICs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1420-1421
• /
• 2008

In this paper, a dual band microstrip filter is designed for RFID Application. Both magnetic and electric coupling structures are implemented to provide high performance passband response. The measured results demonstrate that reflection factor is 20dB and 15dB at 912MHz and 2450MHz. The measured loss is 2.6dB and 2.8dB at 912MHz and 2450MHz, respectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.111-115
• /
• 2008

The productivity is the one of the primary elements to evaluate the new systems performance for building construction along with the economic efficiency, the safety, and the quality improvement. At present the on-site construction automation systems(we will call it as Construction Factory or CF hereafter) is under the development by research group for construction automation of high-rise building. The system includes many sub-systems such as a robotic crane, a construction factory, bolting robots, a building material management system using RFID and so on. In this study we discuss and propose the method to evaluate for these hybrid on-site automation system fundamentally. In future we devise a framework of evaluation modules for the on-site building automation system on the basis of this discuss.

• 대한안전경영과학회지
• /
• 제12권4호
• /
• pp.169-174
• /
• 2010

EPCIS(EPC Information Services) system is a core component of EPCglobal Architecture Framework offering information of the freights, the time of awareness and the location of awareness on the EPCglobal Network. The role of EPCIS is to exchange information based on EPC. There are four kinds of event data which are object event data, aggregation event data, quantity event data, and transaction event data. These EPCIS events data are stored and managed in EPCIS repository. This paper deals with the method which diversifies the data flow load of intensive EPCIS events and effectively manages EPCIS repository for exchanging data smoothly. In order to verify a effectiveness, we measure the performance of the system using a simulation by comparing the existing method with the suggested method.

• 한국항해항만학회지
• /
• 제35권2호
• /
• pp.131-136
• /
• 2011

As the faithful performance of ISPS of IMO, nowadays actually applicable an integrated safety and security system in and out of vessel should be organized in views of seafarers. Therefore, this paper is aimed to design a fundamental system for ship's integrated safety and security. The system of integrated grabbing will affect efficiently in any maritime field of material and human flow. Therefore this research will be expected to affect economical side by securing all the risk of maritime issues. In addition to the passenger ship and merchant vessel, it is applicable to other public and private vessels either. As a result of this paper, the system designed collecting various data through integrating the system including RFID reader, PIR sensor, and CMOS camera by putting an individual number into each unit that could be control at easy.

• 한국정보기술학회 영문논문지
• /
• 제9권1호
• /
• pp.39-46
• /
• 2019

This paper proposes an efficient tag identification scheme for ISO/IEC18000-7 standard by dividing the tags into smaller groups. Tag grouping is based on the reader's transmission power. This can reduce the responding tags in the collection round. If the small number of tags exists, we can anticipate the collision probability will decrease. And it makes the identification speed high. A collection round initiated by the reader's collection command. It also proceeds with increasing the power of the reader until all tags are identified. The results showed that 25% of the performance improved.