• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.4
• /
• pp.404-410
• /
• 2008

In this paper, circular polarized microstrip antenna with a conducted hollow cylinder-typed via around the coaxial probe is proposed to enhance the bandwidth of an RFID portable reader microstrip antenna. An antenna of thickness of 6.4 mm and size of $84{\times}84\;mm$ is manufactured with FR4 substrate and its 10 dB return loss bandwidth is measured to be 92 MHz, which is about three times large than the same size's microstrip antenna without hollow cylindrical via. The measured antenna gain and the axial ratio at each are $0.01{\sim}1.825\;dB$ and $2.3{\sim}8.2\;dB$ within 10 dB return loss bandwidth, respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.3 s.118
• /
• pp.273-281
• /
• 2007

This paper presented design for a dipole antenna operated at 900 MHz band RFID tag, and antenna performance varied by the sticked material was experimentally evaluated. When dipole antenna was sticked by the material having a difffrent electric characteristic such as dielectric material, fero-magnetic material and conductor, variations of antenna return loss and radiation pattern according to the sticked material kinds, size, and height between antenna and the sticked plate were experimentally observed and evaluated. When antenna was sticked by dielectric surface, the measured return loss and radiation pattern by affection of different dielectric permittivity ratio showed resonant frequency shift of about 40 MHz and relative attenuation of 1 dB to 3 dB. Even though frequency shift by size variation of the sticked plate was observed, the measured radiation pattern of dipole antenna located on the sticked plate was similar with one without backside plate. In the case of conductor or fero-magnetic material as the sticked ground plate, because of frequency shift and phase difference by distance between dipole antenna and the sticked ground plate, amplitude decrease of radiation pattern at 910 MHz was observed about 5 dB above.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.451-459
• /
• 2007

RFID it reads information which is it writes, the semiconductor chip for and the radio frequency system which uses the hazard antenna it has built-in transmission of information it talks. Formation which is transmitted like this collection and America which it filtrates wey the RFID search service back to inform the location of the server which has commodity information which relates with an object past record server. The hazard where measurement analysis result the leader for electronic interference does not occur consequently together from with verification test the power level which is received from the antenna grade where it stands must maintain minimum -55dBm and the electronic interference will not occur with the fact that, antenna and reel his recognition distance the maximum 7m until the recognition which is possible but smooth hazard it must stand and and with the fact that it will do from within and and and 3-4m it must be used Jig it is thought.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.04a
• /
• pp.615-618
• /
• 2010

본 논문은 900MHz 대역의 RFID를 이용하여 고속도로 자동 요금징수 시스템을 개발하고, 차량에 부착한 태그를 RFID 리더가 인식하는 효율을 높이기 위하여 최적의 태그부착위치와 안테나 설치위치에 대하여 연구하고 속도에 따른 인식률을 연구 하였다. 연구결과 RFID 리더의 높이는 170cm일 때 지표면과의 각도 $80^{\circ}$와 차량 진행 방향과 RFID 리더의 안테나 면과의 각도 $90^{\circ}$일 때 최적의 RFID 리더 설치 위치를 나타냈고, 태그의 위치는 차량 전면 유리 운전석 쪽 아래 모서리에서부터 가로 10cm와 세로 10cm에서 가장 좋게 나타났다. 차량과 RFID 리더간의 거리에 따른 차량의 속도별에 의한 인식률은 차량과 RFID 리더간의 수평 거리가 25cm 이하일 때 30km/h에서 80km/h까지 모든 경우에 100%의 인식률을 보임으로써 빠른 속도로 톨게이트를 통과하여도 충분히 인식할 수 있을 것으로 나타났다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.174-182
• /
• 2009

In this paper, we propose a novel hybrid reader antenna using a triangular and rectangular sub-patch for near- and far-field RFID reader in UHF band. The antenna operates at 912 MHz, and the low-cost mass-production is available, since the antenna can be built by printing on a FR-4 substrate. The triangular patch is designed to produce a circularly polarized radiation along the bore-sight direction and the rectangular sub-patch is designed to generate a strong magnetic field over the antenna aperture. The measurement shows Hz field greater than -25 dBA/m(3 cm above the antenna aperture), and exhibits circularly polarized radiation(AR<3 dB) with a radiation gain of 6 dBi.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06d
• /
• pp.408-411
• /
• 2010

본 논문에서는 의약품, 음료수병 등 액체용기에 부착이 가능하며, 주변 유전체에 의한 성능열화가 적고 소형으로 바코드를 대신하여 용기에 부착이 가능한 플렉시블 RFID 특수태그 안테나를 제안하였다. 제안된 태그 안테나는 PET 기판 위에 미앤더 기법으로 제작되어 제작 및 대량 생산에 용이하며, 범용 RFID의 사용주파수 (860~960MHz)를 만족시키고, 주변 유전물의 영향으로 인한 성능변화를 최소화할 수 있도록 설계하였다. 제안된 태그 안테나는 본체 중앙부에 T 정합회로를 사용하고 미앤더 구조와 직선 구조의 보조선로 2개를 본체 상단에 삽입하여, 캐패시티브 결합을 이용해 태그칩과의 임피던스 공액정합이 쉽게 이루어지도록 하였다. 또한 2개의 보조선로가 각각 다른 부착물체의 유전율에 상호 보완적으로 전류를 유기시 키도록 하여 주변 유전 물질의 영향에 의한 반사손실을 만족하도록 하였다. 본 태그의 성능은 송신출력 20dBm, 안테나 이득 6dBi인 리더 안테나를 사용하였을 때 자유공간에서는 3.5m, 유리 부착 시 2.61m, 액체가 든 유리병 부착 시 2.51m 의 인식거리 성능을 보였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.71-72
• /
• 2013

In this paper, a design method for a compact slot antenna for 5.8 GHz RFID band (5.725-5.875 GHz) is studied. The proposed slot antenna is size-reduced by bending both ends of the straight slot in "${\Gamma}$"-shape, and a rectangular feed patch is located inside the slot. The effects of slot length, location of feed patch, and width and length of feed patch on the antenna performance are examined. A prototype antenna with optimized parameters for 5.8 GHz band is fabricated on an FR4 substrate and tested experimentally. The experimental results show that the frequency band for a VSWR < 3 ranges 5.72-6.13 GHz (bandwidth 410 MHz), and it corresponds fairly well with the simulated band 5.64-5.97 GHz (bandwidth 330 MHz). The fabricated antenna shows good radiation performance such as maximum power density in both directions normal to the slot plane, and low cross-polarization level of < -20 dB.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.1
• /
• pp.67-72
• /
• 2014

In this paper, we proposed A Study on Construction of Infrastructure for Handicapped Parking Areas Using RFID. This paper is Construction of the Handicapped Parking Areas infrastructure Using RFID with 900MHz band, and researched the optimal position of the tag attached on the vehicle and the location of RFID reader in order to raise the efficiency of RFID reader and the recognition rate by the handicapped vehicle. The result of research is shown the optimal position of RFID reader establishment when the height of RFID reader is 170cm in height and the angle of $80^{\circ}$ with the ground when the vehicle traveling direction of the antenna and the RFID reader when the surface and the angle of $90^{\circ}$ showed the best position RFID readers installed. Parking spaces for the disabled in accordance with these results the RFID readers installed and it works in conjunction with enforcement camera car tagged crackdown on vehicles and other general management, the system is built to allow handicapped parking spaces that meet the intent of the original purpose being used as expected to contribute significantly.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1084-1090
• /
• 2009

This paper presents a balun consisting of a T-junction, a Right/Left Handed Transmission line(RLH-TL), and a conventional Right Handed(RH) line. It is assumed that the RLH-TL consists of N unit-cells. We provide closed-form solutions and design a very compact wideband(80 %) balun using CPW lines based on the obtained solutions. Then, we propose a capacitively loaded loop antenna designed for a uniform current distribution. The antenna resistance of the proposed antenna at resonance is about 204 ohms. The length of the unit cell is about $\lambda/12$(total length: $1\;\lambda$). The magnetic field generated from the proposed antenna is stronger than that of the conventional one by as much as 20 dB. We used a coplanar strip line(CPS) to combine the loop antenna and balun. The proposed antenna may be used as a near field UHF RFID reader antenna.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.194-200
• /
• 2011

Recently, RFID(Radio Frequency IDentification) market spread in industry region is entering a phase of stagnation due to cost issue. RFID tag inlay cost has become relatively more expensive due to the recent decrease in chip price. Therefore, a simple and rapid design technique for RFID tag has yet to be implemented to achieve low cost. This paper presents a design technique considering chip impedance for antenna design for improved accuracy and computation time. As a result, it is confirmed that analysis error for resonance ranges within 20MHz and readable range error falls within 1.5m.