• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.753-758
• /
• 2009

This paper is proposed the hardware structure and signal processing method of the RF-Tag based on heart sound to develop the mobile biomedical information device for the u-healthcare system. The RF-Tag in this study is consisted of a skin temperature sensor, a dynamic microphone for heart sound detection, Bluetooth communication to transmute healthcare data, and pulse period detection algorithm with adaptive gain controller. We experimented to evaluate performance of the RF-Tag in noisy environments. In addition, the RF-Tag has shown the good performance in the results of experiment. If the proposed methods in this study apply to design the u-healthcare device, we will be able to get the exact health data on real time in mobile environments.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.35-42
• /
• 2003

We have studied DC energy conversion of RF card by wireless communication. In order to attain an objective, it used the system which is a Rectenna. The main purpose of energy conversion system is the operation of the circuits at RF-ID system. The proposed RF-ID system is a lot classified with the reader and tag. Reader is a kind of the base station role supporting RF energy. And priority tag convert RF energy from the reader it was delivered with a wireless to DC energy. The energy which is converted like Tag. It transmits to the reader characteristic ID of each card. The tag is mainly divided into rectifier, power module, memory and controller. The FRAM maintains the data like a ROM in no-power situation. And the advantage is a low power element compared with other EEPROM. There are two considerations, when RF energy is converted into DC source by wireless. One is energy amount supported from the reader, the other is high power efficiency. This paper presents a study of simulation and experiments on the RF-DC conversion circuit in tag by the power efficiency concentrated.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.41-44
• /
• 2004

A RFID(Radio Frequency IDentification) system Is a kind of Radio Frequency Communication System and a branch of Automatic Data Collection System. The RFID System is composed of RF Tag(or Transponder) and RFID Reader(controller). This paper deal with Wireless communications that acquired RF Tag ID by RFID reader, and then target system will transmit Tag ID to RFID Server through the internet using Wireless LAN. The RFID system of Todays are commonly used by a wired RFID system. In this system uses commonly used Wireless LAN, and then we can connect the internet if we have a AP(Wireless Lan Access Point). Internet connection can make a transmission of RF Tag ID, and can make a reception of returning data that are images or information.

• Journal of the Institute of Convergence Signal Processing
• /
• v.19 no.3
• /
• pp.89-96
• /
• 2018

This study aims to develop a fully passive smart sensing tag utilizing RF (Radio Frequency) energy harvesting technology at UHF (Ultra High Frequency) band of 915MHz. To optimize the power collected under various radiated conditions, an efficient energy harvesting module exploiting a boost circuit with maximum power point tracking (MPPT) is employed. Specifically, the proposed tag features two orthogonal antennas to enhance its capability of both energy scavenging and data transmissions. The experimental result shows that the developed smart sensor tag can scavenge an RF input power of as low as 0.19mW at a distance of 4 meters for a 3.6Vdc output. Furthermore, the proposed smart sensor tag performs the feasibility of completely autonomous monitoring food freshness at 2 meters with a low-power sensor array.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.43-49
• /
• 2008

The Real Time Location System (RTLS) is very important in the ubiquitous society for real time tracking of men, high price assets, and logistics products. In this work, we developed an active RF system for RTLS and tested its performance. The RTLS system developed in this work was constructed of three active readers and one active tag. The small size tag developed in this work operated with a coin type battery. To make the tag smaller, we used an internal PCB antenna and a chip antenna. We tested the performance of the tag. To reduce the manufacturing cost of our RF system, we used low price RF transceiver CC2510 chip-set. The CC2510 chip-set provided RSSI(Received Signal Strength Indicator) signal which could be used to determine the distances between an active tag and three active readers.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.79-85
• /
• 2004

In this paper, the RF-ID system for ubiquitous tagging applications has been designed, fabricated and analysed. The RF-ID System consists of passive RF-ID Tag and Reader. The passive RF-ID tag consists of rectifier using zero-bias schottky diode which converts RF power into DC power, ID chip, ASK modulator using bipolar transistor and slot loop antenna. We suggest an ASK undulation method using a bipolar transistor to compensate the disadvantage of the conventional PIN diode, which needs large current Also, the slot loop antenna with wider bandwidth than that of the conventional patch antenna is suggested The RF-ID reader consist of patch array antenna, Tx/Rx part and ASK demodulator. We have designed the RF-ID System using EM and circuit simulation tools. According to the measured results, The power level of modulation signal at 1 m from passive RF-ID Tag is -46.76 dBm and frequency of it is 57.2 KHz. The transmitting power of RF-ID reader was 500 mW

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.491-497
• /
• 2015

In this paper a method of design and Implementation of RFID based control system for reducing standby power consumption at the power outlet is described. The system is composed of a RF controlled power outlet having relay and an active RFID tag communicating with the RF reader module controlling the relay. When the tag carried by human approaches to the RF reader the reader recognizes the tag and switch off the relay based on the RSSI level measurement. A low power packet prediction algorithm has been used to decrease the DC power consumption at both the tag and the RF reader. The result of experiment shows that successful operation of the relay control has been obtained while low power operation of the tag and the reader is achieved using above algorithm. Also setting the distance between the reader and the tag by controlling transmission power of the tag and adjusting the duty cycle of the packet waiting time when the reader is in idle state allows us to reduce DC power consumption at both the reader and the tag.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10a
• /
• pp.298-300
• /
• 2004

휴대 단말기 보유율의 급격한 증가는 새롭고 다양한 형태의 무선 통신 기술의 개발을 촉진시키는 계기가 되었으며, 특히 국내의 경우 이동통신 시장의 경제적이나 양적으로 급속한 성장을 이루어 사회 전반에 걸쳐서 새로운 가치를 생산해 내어 생활 모습을 크게 바꾸어 놓고 있다 따라서 이러한 환경의 변화는 사용자 중심의 다양한 서비스를 제공할 수 있는 차세대 무선 통신 기술의 연구가 필요한 실정이다. 따라서 본 논문에서는 물류 관리에 적용을 고려하여 RF Tag 인증 프로토콜을 제안하고자 한다. 제안된 방식의 경우 기존 RF Tag 인증 연구에서 보다 하드웨어적 경량성을 제공할 뿐만 아니라 물류적용을 위한 식별 회수에 제한 둠으로 해서 보다 안전하고 효율적인 물류 관리 서비스를 적용할 수 있는 방식이다

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.5
• /
• pp.46-51
• /
• 2013

In this paper, a dual-band antenna is proposed for the RF power harvester system as well as RFID tag. The proposed antenna operates as the passive and active RFID tag antenna in the UHF and microwave band, respectively. In addition, to charge the battery of an active RFID tag in the microwave band, it harvest the RF signal for tagging from the passive RFID tag antenna in the UHF band. The proposed antenna operates in the UHF band (917~923.5 MHz) and microwave band (2.4~2.45 GHz). In order to obtain the dual-band operation, the dipole structure and meander parasitic elements are proposed as the ${\lambda}/2$ and $1{\lambda}$ dipole antenna, respectively. The radiating dipole structure in the microwave band acts as the coupled feed for the meander parasitic elements in the UHF band. The impedance bandwidth (VSWR < 2) of the proposed antenna covers 917~923.5 MHz (UHF band) and 2.4~2.45 GHz (Microwave band). Measured total efficiencies are over 45 % in the UHF band and over 70 % in the microwave band. Peak gains are over 0.18 dBi and 2.8 dBi in the UHF and microwave band with an omni-directional radiation pattern, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.731-734
• /
• 2011

This paper proposed the Low power configuration of Single hop WSN(Wireless Sensor Network) system. When the RF communication is done each tag node during the WSN systems operating, power consumption is greatest. There for, if you configure the Network with the RF communication module turn on/off periodically, power consumption less then operating the module all the time without it toggles. However, some data omissions may occur in which transmission and receipt is done. So this paper proposed the algorithm for low power system without data omissions.