• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.449-452
• /
• 2005

For home networking system with a function of air quality monitoring, a wireless sensor module with several air quality monitoring sensors was developed for indoor environment monitoring system in home networking. The module has various enlargements for various kinds of sensors such as humidity sensor, temperature sensor, CO2 sensor, flying dust sensor, and etc. The developed wireless module is very convenient to be installed on the wall of a room or office, and the sensors in the module can be easily replaced due to well designed module structure and RF connection method. To reduce the system cost, only one RF transmission block was used for sensors' signal transmission to 8051 microcontroller board in time sharing method. In this home networking system, various indoor environmental parameters could be monitored in real time from RF wireless sensor module. Indoor vision was transferred to client PC or PDA from surveillance camera installed indoor or desired site. Web server using Oracle DB was used for saving the visions by web-camera and various data from wireless sensor module.

• Journal of Digital Contents Society
• /
• v.17 no.3
• /
• pp.173-180
• /
• 2016

In this paper, a design of transceiver module for real-time wire and wireless robust integrated security system to solve the problem of conventional security system and its transceiver module is proposed. The presented robust integrated security system is designed with RF control unit and wireless transceiver module. A RF controller in transceiver module works as a low-power RF transceiver system. It is designed to use specific bandwidth stored in registers and manipulate RF power of transceiver by accessing the random values of registers. Operation algorithm for RF transceiver module is also presented. The designed transceiver module and the operation algorithm are implemented and verified by experiments.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.201-209
• /
• 2016

In wireless sensor networks (WSNs) duty cycling has been an imperative choice to reduce idle listening but it introduces sleep delay. Thus, the conventional WSN medium access control protocols are bound by the energy-latency tradeoff. To break through the tradeoff, we propose a radio wave sensor called radio frequency (RF) wakeup sensor that is dedicated to sense the presence of a RF signal. The distinctive feature of our design is that the RF wakeup sensor can provide the same sensitivity but with two orders of magnitude less energy than the underlying RF module. With RF wakeup sensor a sensor node no longer requires duty cycling. Instead, it can maintain a sleep state until its RF wakeup sensor detects a communication signal. According to our analysis, the response time of the RF wakeup sensor is much shorter than the minimum transmission time of a typical communication module. Therefore, we apply duty cycling to the RF wakeup sensor to further reduce the energy consumption without performance degradation. We evaluate the circuital characteristics of our RF wakeup sensor design by using Advanced Design System 2009 simulator. The results show that RF wakeup sensor allows a sensor node to completely turn off their communication module by performing the around-the-clock carrier sensing while it consumes only 0.07% energy of an idle communication module.

• Journal of the Semiconductor & Display Technology
• /
• v.15 no.4
• /
• pp.16-21
• /
• 2016

In this paper, we have designed and fabricated a receiver module for 5.8GHz Microwave Wireless Power Transmission. The receiver module was composed of an antenna, BPF (Band Pass Filter) and RF-DC converter. The antenna was designed to RHCP (Right Hand Circular Polarization). And we used ${\lambda}g/2$ open-circuited stubs for the BPF. In addition, the RF-DC converter used the tripler voltage circuit for voltage multipliers. The integrated receiver RF module for 5.8GHz Microwave Wireless Power Transmission has been designed and fabricated. The voltage was measured to the distance of 50cm.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.85-88
• /
• 2017

In this paper, we have designed and fabricated a RF-DC voltage multiplier for 5.8GHz microwave wireless power transmission. In order to obtain higher voltage, the RF-DC voltage multiplier with 10 diodes (D-10) and the receiver module with an antenna and BPF (Band Pass Filter) was manufactured. The measured and compared results show that the voltages of the proposed one are lower than those of the previous tripler module up to 40cm. However, the voltage of the proposed one with the voltage multiplier is higher than that of the tripler module at the distances of 45cm and 50cm due to the voltage multiplier with 10 diodes.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.55-58
• /
• 2002

This paper describes an RF module for 2.4GHz wireless audio/video transmission. The pre-processed baseband input signals are FM-modulated using a VCO and then transmitted through an antenna after RF filtering. The designed circuits are implemented using a Teflon board of which the size is 52mm${\times}$62mm. The measured maximum output signal levels are around -3dBm and the harmonics are less than -450dBc. The manufactured module consumes 130mA from a 8V supply.

• Journal of information and communication convergence engineering
• /
• v.18 no.4
• /
• pp.254-259
• /
• 2020

Phased-array antennas comprise a demanding antenna design methodology for commercial wireless communication systems or military radar systems. In addition to these two important applications, the phased-array antennas can be used in beamforming for wireless charging. In this study, a four-way analog beamforming front-end module (FEM) for a hybrid beamforming system is developed for 2.4 GHz operation. In a hybrid beamforming scheme, an analog beamforming FEM in which the phase and amplitude of RF signal can be adjusted between the RF chain and phased-array antenna is required. With the beamforming and beam steering capability of the phased-array antennas, wireless RF power can be transmitted with high directivity to a designated receiver for wireless charging. The four-way analog beamforming FEM has a 32 dB gain dynamic range and a phase shifting range greater than 360°. The maximum output RF power of the four-way analog beamforming FEM is 40 dBm (=10 W) when combined the four individual RF paths are combined.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.107-114
• /
• 2023

In this paper, the results of experiments conducted in indoor wired and outdoor wireless environments to reduce the interference impact of 5G mobile communication on fixed satellite services using RF Interference Reduction Module (IRM) are presented. Test results for interference signals with a 100MHz bandwidth in a wired environment demonstrate that RF IRM can reduce interference by more than 20dB in a 100MHz bandwidth. The performance of RF IRM was also tested in the S-band wireless environments. In the S-band wireless environments with interference signals having a 20MHz bandwidth, RF IRM exhibits interference reduction performance of 12-15dB, for signals with a 50MHz bandwidth, it shows 10-12dB interference reduction, and for signals with a 100MHz bandwidth, it demonstrates 5-10dB interference reduction. This paper shows that RF IRM can be used not only within transceivers but also in wireless environments to mitigate interference.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.277-280
• /
• 2005

In this paper, we propose a frequency synthesizer for dualband repeater. The dual-band RF technology for applications to the wireless repeater for CDMA and WCDMA mobile communications has been developed in this paper. The dualband PLL module consisted of dual-band VCO and one PLL IC has been developed. The main technological efforts for the dual-band PLL module is to suppress the intermodulation distortion by applying the miniature ceramic filter using the slow wave characteristics. The dual-band miniature RF module including dual-band PLL module and one MCU controller is very attractive for applications to the miniature dual-band RF mobile repeaters.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3064-3066
• /
• 1999

The existing equipment with wire communication can expect the stability of data transmission. However, according to increasing a number of DTE (Data Terminal Equipment), wiring work becomes a heavy burden. Restriction to application about portable DTE and the lack of flexibility are another drawback of wire communication. This paper presents the design and implementation of a RF (Radio Frequency) based wireless communication system. The RF based module is designed to the multi communication between DTEs. The RF based module consists of RF circuit and microprocessor. The main properties of RF circuit are maximum 5Kbps transmission rate, maximum 90m transmission distance and 433MHz frequency band. The microprocessor rearrange the data into AHDLC(Advanced High level Data Link Control) format and then instructs RF circuits to transmit/receive the data. The RF module have a wide application field such as fire/security alarm, remote control/measurement etc..