• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.489.2-489.2
• /
• 2014

The planar type flexible piezoelectric energy harvesters (PEH) based on PbZr0.52Ti0.48O3 (PZT) thin films on the flexible substrates are demonstrated to convert mechanical energy to electrical energy. The planar type energy harvesters have been realized, which have an electrode pair on the PZT thin films. The PZT thin films were deposited on double side polished sapphire substrates using conventional RF-magnetron sputtering. The PZT thin films on the sapphire substrates were transferred by PDMS stamp with laser lift-off (LLO) process. KrF excimer laser (wavelength: 248nm) were used for the LLO process. The PDMS stamp was attached to the top of the PZT thin films and the excimer laser induced onto back side of the sapphire substrate to detach the thin films. The detached thin films on the PDMS stamp transferred to adhesive layer coated on the flexible polyimide substrate. Structural properties of the PZT thin films were characterized using X-ray diffraction (XRD) and scanning electron microscopy (SEM). To measure piezoelectric power generation characteristics, Au/Cr inter digital electrode (IDE) was formed on the PZT thin films using the e-beam evaporation. The ferroelectric and piezoelectric properties were measured by a ferroelectric test system (Precision Premier-II) and piezoelectric force microscopy (PFM), respectively. The output signals of the flexible PEHs were evaluated by electrometer (6517A, Keithley). In the result, the transferred PZT thin films showed the ferroelectric and piezoelectric characteristics without electrical degradation and the fabricated flexible PEHs generated an AC-type output power electrical energy during periodically bending and releasing motion. We expect that the flexible PEHs based on laser transferred PZT thin film is able to be applied on self-powered electronic devices in wireless sensor networks technologies. Also, it has a lot of potential for high performance flexible piezoelectric energy harvester.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.3
• /
• pp.266-273
• /
• 2016

In this paper, we propose the signal processing techniques for the command link receiver mounted to aircrafts flying at a high speed. In order to acquire the various information transmitted from ground through radio frequency links, the wide received signal range must be guaranteed as well as the carrier synchronization and symbol synchronization be performed correctly within short pulse sections. After the synchronization step, we should be able to achieve theoretical performance of the modulation and demodulation scheme applied as deciding bit and symbol at the time appointed. By test results, we make sure that the proposed signal processing techniques can be effectively applied command link receiver mounted to aircrafts.

• Journal of the Korean School Mathematics Society
• /
• v.22 no.3
• /
• pp.241-256
• /
• 2019

In this paper, we analyzed the types of tasks presented in the 'Probability and Statistics' textbooks and how the cognitive competences required to perform the tasks provide students with opportunity-to-learn. To this end, the analysis of the 9 books of the 'Probability and Statistics' test textbooks according to the 2015 revised mathematics curriculum showed that the context-based tasks(CF type, RE type) ranged from 67.5% to 78.0% of the total number of tasks in each textbook, but the ratio of relevant and essential tasks related to real life is from 0.4% to 2.0%, it was found that most of the context-based tasks presented in the textbooks were disguised as real life materials. The cognitive competences of context-based tasks ranged from 29.6% to 50.0% in reproduction category, from 33.8% to 54.3% in connection category, and from 8.8% to 20.0% in reflection category. As a result, there was not enough opportunity-to-learn for students to experience reflective cognitive processes.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.192-204
• /
• 2004

The surface electromyographic(sEMG) analyses were knee joint angle during open kinetic chain exercise (OKC) and close kinetic chain exercise (CKC) in vastus medialis (VM), vastus lateralis (VL), and rectus femoralis (RF). Ten subjects with normal , aged 20 to 30(X=27.4, SD=3.23), were randomized Statistical techniques for data analysis were applied paired t-test. The 0.05 level of significane was used as the critical level for rejection of the null hypotheses for the study. And the results were: 1) Both OKC and CKC improved the strength of quadriceps muscle as the knee joint flexion was increased. 2) In OKC, the strength of VM was improved the most at the 30 degree angle. 3) In CKC, the strength of VM was improved the most at the 30 degree angle. 4) The VM/VL ratio was the largest at the 10 and 20 degree angles in OKC and CKC. 5) The VM/VL ratio at 10, 20, and 30 degree angles was significantly different between OKC and CKC (P < 0.05). Base on the results, the OKCE is recommended for the knee joint patients, especially for the patellofemoral pain syndrome patients, during the early phase of rehabilitation. In order to improve strength of the quadriceps, muscle strength training at 30 degree angle is recommended. In order to improve VM/VL ratio, 10 and 20 degree angles are recommended during OKCE and CKCE, respectively. Future researches are warranted comparing electromyographic analysis between OKCE and CKCE in the quadriceps at a certain work lead, and muscle strength performance in the quadriceps at different positions of foot.

• Journal of Biosystems Engineering
• /
• v.37 no.6
• /
• pp.352-358
• /
• 2012

Purpose: The inexpensive black box system was developed to acquire and save driving information, to give the slope information, and to transmit SOS and theft signal. Method: The device consists of a main micro controller to acquire and save data, a GPS sensor module, a CDMA module, a touch LCD module, a RF (Radio Frequency) ID module, a SD (Secure Digital) card module, an emergency electric power source, a theftproof circuit, and a sensing device. The sensing device consists of a 8 bit micro controller, a accelerometer to detect impulse, two slope sensors to detect roll and pitch angle and a circuit to detect operation of 6 lighting devices. Results: Test results are as follows: 1) a tractor can be start up only with an electronic key (password or RFID card), 2) theft signal was transmitted when a tractor moved without an electronic key, 3) SOS was transmitted at conditions that rollover or crash happened. 4) 5 more than per 1s data are recorded at 5 minute intervals as new file name in SD card. Conclusions: This system can be used to save travelling record, reduce accident, prevent theft and rescue life in the accidents.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.2
• /
• pp.121-128
• /
• 2008

Modularized GPS software defined radio (SDR) has many advantages of applying and modifying algorithm. Hardware based GPS receiver uses many hardware parts (such as RF front, correlators, CPU and other peripherals) that process tracked signal and navigation data to calculate user position, while SDR uses software modules, which run on general purpose CPU platform or embedded DSP. SDR does not have to change hardware part and is not limited by hardware capability when new processing algorithm is applied. The weakness of SDR is that software correlation takes lots of processing time. However, in these days the evolution of processing power of MPU and DSP leads the competitiveness of SDR against the hardware GPS receiver. This paper shows a study of modulization of GPS software platform and it presents development of the GNSS software platform using MATLAB Simulink™. We focus on post processing SDR platform which is usually adapted in research area. The main functions of SDR are GPS signal acquisition, signal tracking, decoding navigation data and calculating stand alone user position from stored data that was down converted and sampled intermediate frequency (IF) data. Each module of SDR platform is categorized by function for applicability for applying for other frequency and GPS signal easily. The developed software platform is tested using stored data which is down-converted and sampled IF data file. The test results present that the software platform calculates user position properly.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.2
• /
• pp.301-307
• /
• 2018

In this study, a relatively effective process is used to sterilize Escherichia coli on the surface of micro-sized calcium citrate powder using nitrogen and argon as process gases in a low-temperature vacuum plasma treatment. The purpose of this study is to confirm and to introduce the effectiveness of homogeneous surface treatment for the sterilization of fine inorganic powder by the rotatable low-temperature RF plasma system designed by ourselves. The results of the test using 3M petrifilm showed that there were no remarkable spots in the case of the surface of plasma treated powder, whereas the untreated powder showed many blue spots, which indicating that the E. coli was alive. After 5 days, in the same samples, the blue spots were seen to be larger and darker than before, while the plasma-treated powder showed no changes. The results from FE-SEM analysis showed that the E. coli was damaged and/or destroyed by reactive species generated in the plasma space, resulting in the E. coli being sterilized. Furthermore, the sterilization effects according to the selected parameters ($N_2$ and Ar; flow rate 30 and 50 sccm) adapted in this study were mutually similar, regardless of such different process parameters, and this indicates that homogeneous treatment of powder surfaces could be more effective than conventional methods. Therefore, the plasma apparatus used in this study may be a practical method to use in a powerful sterilization process in powder-type food.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.573-586
• /
• 2020

PM (particulate matter) is of interest to everyone because it can have adverse effects on human health by the infiltration from respiratory to internal organs. To date, many studies have made efforts for the prediction of PM10 and PM2.5 concentrations. Unlike previous studies, we conducted the prediction of tomorrow's PM10 concentration for the Air Korea stations using Chinese PM10 data in addition to the satellite AOD and weather variables. We constructed 230,639 matchups from the raw data over 3 million and built an RF (random forest) model from the matchups to cope with the complexity and nonlinearity. The validation statistics from the blind test showed excellent accuracy with the RMSE (root mean square error) of 9.905 ㎍/㎥ and the CC (correlation coefficient) of 0.918. Moreover, our prediction model showed a stable performance without the dependency on seasons or the degree of PM10 concentration. However, part of coastal areas had a relatively low accuracy, which implies that a dedicated model for coastal areas will be necessary. Additional input variables such as wind direction, precipitation, and air stability should also be incorporated into the prediction model as future work.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.75-78
• /
• 2006

In case of contacts between semiconductor and metal in semiconductor circuits, they become unstable because of thermal budget. To prevent these problems, we use diffusion barrier that has a good thermal stability between metal and semiconductor. So we consider the diffusion barrier to prevent the increase of contact resistance between the interfaces of metals and semiconductors, and the increase of resistance and the reaction between the interfaces. In this paper we deposited tungsten boron carbon nitride (W-B-C-N) thin film on silicon substrate. The impurities of the $1000\;{\AA}-thick$ W-B-C-N thin films provide stuffing effect for preventing the inter-diffusion between metal thin films $(Cu-2000\;{\AA})$ and silicon during the high temperature $(700\~1000^{\circ}C)$ annealing process.

• Journal of Ginseng Research
• /
• v.38 no.3
• /
• pp.187-193
• /
• 2014

Background: White ginseng (Panax ginseng Meyer) is commonly distributed as a health food in food markets. However, there is no practical method for distinguishing Korean white ginseng (KWG) from Chinese white ginseng (CWG), except for relying on the traceability system in the market. Methods: Ultra-performance liquid chromatography quadrupole time-of-flight mass spectrometry combined with orthogonal partial least squares discrimination analysis (OPLS-DA) was employed to discriminate between KWG and CWG. Results: The origins of white ginsengs in two test sets ($1.0{\mu}L$ and $0.2{\mu}L$ injections) could be successfully discriminated by the OPLS-DA analysis. From OPLS-DA S-plots, KWG exhibited tentative markers derived from ginsenoside Rf and notoginsenoside R3 isomer, whereas CWG exhibited tentative markers derived from ginsenoside Ro and chikusetsusaponin Iva. Conclusion: Results suggest that ultra-performance liquid chromatography quadrupole time-of-flight mass spectrometry coupled with OPLS-DA is an efficient tool for identifying the difference between the geographical origins of white ginsengs.