• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.4
• /
• pp.425-432
• /
• 2007

This paper describes a development of ship's refer-container remote monitoring system(RRMS). This system consists of Master, repeater with a switched mode power supply(SMPS) and slave terminal. Slave terminal is composed of wireless MODEM and microprocessor part, checks its conditions like temperature. humidity & etc through the interrogate port(IP) of refer-container. and transmits their data to master. Repeater's role is that connect so that signal which is transmitted from Slave Terminal by Master may not receive electric wave interference by container boxes. We verify the effectiveness of proposed system through the experimental works in container yard and ship.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.6
• /
• pp.335-344
• /
• 2011

The Tire Pressure Monitoring System(TPMS) is often used recently. However, the standards and functions are very different. Even though the regulation requires all vehicles install the TPMS, there is no a standard of a Physical and Media access control protocol which provides compatibility with other systems. In this paper, we propose a MAC protocol based on the international standard and an energy efficient hybrid RF system platform. The MAC protocol provides compatibility of the TPMS with other systems and the RF system platform reduces energy consumption significantly.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1457-1464
• /
• 2017

This paper is to introduce the a system which monitors and detects the object position in reinforced the concrete structure using UWB-RF. This system is able to check any changes in the inside of the concrete structure using its penetration and reflection characteristics and it can also numerically measure the position of rebar in the concrete structure. For the verification of the performance of this system, we set up the internal compositions of concrete in 3 different types of test-bed. On the other hand, for the measuring of the location of rebar, which varies depending on the type of structure, the software which shows the distance in the structure were used. The result shows that the position in the concrete could be measured within the tolerance of ${\pm}1{\sim}4mm$ depending on the type of structure in the concrete.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.8
• /
• pp.1779-1782
• /
• 2009

The developed system is captured by RS-232 telecommunication receiving data (temperature and humidity of each incubator) through radio frequency sensor network system and is made by monitoring system for one person collecting each channel data. This monitoring system is capable of monitoring not only PDA through TCP/IP telecommunication but also personal computer. This system is actively application on telecommunication function of LabVIEW and PDA module and is considerably saved in processing time than using in other tools.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.2
• /
• pp.304-309
• /
• 2019

This paper presents a CMOS RF-to-DC converter for video surveillance disposable IoT applications. It widely harvests RF energy of 3G/4G cellular low-band frequency range by employing a tunable impedance matching network. The proposed converter consists of the differential-drive cross-coupled rectifier and the matching network with a 4-bit capacitor array. The proposed converter is designed using 130-nm standard CMOS process. The designed energy harvester can rectify the RF signals from 700 MHz to 900 MHz. It has a peak RF-to-DC conversion efficiency of 72.25%, 64.97%, and 66.28% at 700 MHz, 800 MHz, and 900 MHz with a load resistance of 10kΩ, respectively.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1445-1447
• /
• 2004

In recent years, the smart card is widely applied for wireless communication, tracking, transportation logistics, diagnostic monitoring, access control and security. RF-ID system is universally applicable. Passive RF-ID system consists of reader and passive tag. The reader transmits energy and simple information to a tag by wireless and the power from the reader is transformed for controller, FRAM and Bluetooth module. In this paper, proposed for the improvement of wireless power transmission and demonstrated the propriety through experiments in several conditions.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.1
• /
• pp.7-12
• /
• 2016

With due to the recent development of USN (Ubiquitous Sensor Network) technology, a monitoring system has been developing for assuring the structural integrity of infrastructure through normal or long term measurements during their lifetime. An accident such as a collapse of infrastructure may cause not only loss of life but also damage to the economy of the nation. In order to enhance the availability of infrastructure and to be able to maintain their lifetime, it is necessary to monitor and to evaluate continuously the structural integrity throughout their entire lifetime. The purpose of this paper is to develop a monitoring system integrated with evaluation function based on the ubiquitous technology. The most essential part of this study is focusing more on developing a specific module convertible to A/D, which is to enhance the applicability of sensors that had not been applied to existing monitoring systems. Conclusively it has been successfully enhanced to make more diverse the number of sensors and measuring techniques for the monitoring system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.4
• /
• pp.324-334
• /
• 2023

In this paper, the target simulator for RF signals was developed by using VST(Vector Signal Transceiver) and set by real-time signal processing SW programs. A function to process RF signals using FPGA(Field Programmable Gate Array) board was designed. The system functions capable of data processing, raw signals monitoring, target signals(simulated range, velocity) generating and RF environments data analyzing were implemented. And the characteristics of modulated signal were analyzed in RF environment. All function of programs for processing RF signal have options to store signal data and to manage the data. The validity of the signal simulation was confirmed through verification of simulated signal results.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2163-2164
• /
• 2006

It is desirable to monitor the vital signals, such as ECG, of a emergency patient during transfer in the hospital as well as in the ambulance. The purpose of this study is to develop a system which provides a real-time and wireless ECG to the medical staff nearby patient during transfer in hospital. In this context, we developed a low-power, low-cost and portable ECG system consisting of 1) ECG measurement and RF transmission module and 2) RF receiving and LCD display module. The developed system is expected to be useful in monitoring ECG of a patient during transfer in the hospital.

• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.68-78
• /
• 2023

In this paper, improvement measures were studied for false alarm (abnormal lighting) of emergency hydraulic warning light due to RF radiation signals in aircraft. When the warning lamp of the emergency hydraulic system is lit during flight due to electromagnetic interference caused by RF radiation signals, it affects flight mission and safety which can result in efficiency degradation and maintenance of flight mission. For false alarm of emergency hydraulic warning light, root cause analysis and troubleshooting were carried out. By shielding a composite strip under fuselage of the aircraft located in the path of the RF radiation signal, the RF radiation signal flowing into the emergency hydraulic indicator was blocked. Results of applying the improvement method through ground and flight monitoring were also described.