• 한국통신학회논문지
• /
• 제27권1B호
• /
• pp.56-65
• /
• 2002

본 논문에서는 IS-2000 시스템에 적합한 심볼 분할 OTD (orthogonal transmit diveristy)를 제안하였다. 심볼 분할 OTD는 Meyer가 제안한 심볼 분할과 OTD를 결합하여 최대 경로 다이버시티 및 시간 다이버시티 이득을 얻기에 IS-2000 순방향 성능을 개선시킬 수 있다. 이를 IS-2000 표준의 순방향 fundamental 채널에 대하여 시뮬레이션을 통해 확인하였다. 그리고, 그 결과를 기존의 IS-2000 표준에서 채택된 OTD와 STS (space-time spreading)의 성능과 비교하였다. 본 논문에서 제안한 방법을 IS-2000 시스템에 적용할 경우, 1% FER (frame error rate)을 얻기 위한 송신전력이 OTD의 경우보다 0.5-7.7dB 정도 감소되어 STS의 성능과 거의 일치하였다. 뿐만 아니라, 송신신호의 PAR(peak-to-average power ratio)가 STS보다 적으므로, 기지국 전력증폭기와 같은 RF 회로의 복잡도를 감소시킬 수 있는 장점이 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1281-1283
• /
• 1995

In this paper, we develop a prototype of the Optical SCM transmission module. This module is possible to application to electric facilities for control and measurements. Transmission channel number is two channels, namely, image and digital signal. In the image transmission, modulation method is AM, baseband signal is NTSC video signal and demodulation use PLL. Modulation of digital signal is QPSK, 1.544Mbps and demodulation use PLL. First, we calculate theoretical analysis about RF and Optical link in the transmission. This calculation is well correspond with practical system and transmission experiment is excellent, but this is only two channel model. And now, we plan to multichannel transmission to measure intermodulation, frequency assignments and optimal channel numbers et al.

• ETRI Journal
• /
• 제35권3호
• /
• pp.386-396
• /
• 2013

A 10-Gbit/s wireless communication system operating at a carrier frequency of 300 GHz is presented. The modulation scheme is amplitude shift keying in incoherent mode with a high intermediate frequency (IF) of 30 GHz and a bandwidth of 20 GHz for transmitting a 10-Gbit/s baseband (BB) data signal. A single sideband transmission is implemented using a waveguide-tapered 270-GHz high-pass filter with a lower sideband rejection of around 60 dB. This paper presents an all-electronic design of a terahertz communication system, including the major modules of the BB and IF band as well as the RF modules. The wireless link shows that, aided by a clock and data recovery circuit, it can receive $2^7$-1 pseudorandom binary sequence data without error at up to 10 Gbit/s for over 1.2 m using collimating lenses, where the transmitted power is 10 ${\mu}W$.

• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.45-49
• /
• 2003

Wireless life signal detecting system is implemented with using the mechanism of Doppler Effect. This system can measure the respiration and heart rates with the periodic movement of skin and muscle near the heart. The system is consisted of antenna, RF transmitter, receiver, and display part. We did use two operating frequencies at 1.9 ㎓ and 10 ㎓. Firstly, the link budget about detecting system is analyzed and the signal detected from the system is compared with electrocardiogram(ECG) of monitor which is using for patient monitoring in hospital. Secondly, the detection of vital sign is also performed according to the different distances, and including behind the wall.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권1호
• /
• pp.74-81
• /
• 2004

We propose a novel scheme to transmit high center frequency RF signals using electroabsorption devices (EADs) as frequency converters at the transmitter and the receiver. In this approach frequency heterodyning is employed for obtaining high center frequency. With the EAD as a detector/mixer at the receiver we demonstrated a smaller conversion loss than that of the conventional modulator/mixer. With EAD as a modulator/mixer at the transmitter and with two heterodyned lasers to generate an optical local oscillator (LO), we demonstrated a large reduction (${\sim}23dB$) in conversion loss, and the transmission is not limited by the optical saturation of the EAD. This transmission scheme has optical single-side-band transmission feature which greatly relieves the fiber dispersion effect.

• Journal of Information Processing Systems
• /
• 제7권1호
• /
• pp.43-52
• /
• 2011

Whether it is crosstalk, harmonics, or in-band operation of wireless technologies, interference between a reference system and a host of offenders is virtually unavoidable. In past contributions, a benchmark has been established and considered for coexistence analysis with a number of technologies including FWA, UMTS, and WiMAX. However, the previously presented model does not take into account the mobility factor of the reference node in addition to a number of interdependent requirements regarding the link direction, channel state, data rate and system factors; hence limiting its applicability for the MBWA (IEEE 802.20) standard. Thus, over diverse modes, in this correspondence we analytically derived the greatest aggregate interference level tolerated for high-fidelity transmission tailored specifically for the MBWA standard. Our results, in the form of benchmark indicators, should be of particular interest to peers analyzing and researching RF coexistence scenarios with this new protocol.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.63-64
• /
• 2006

Recently, researches for high-speed optical devices have been increased to provide mass data transmission and high-speed optical communication. Optical modulator in the transmission link is one of the crucial devices in total optical network system and it can affect a great effect to the whole transmission properties. In this paper, traveling wave electro-absorption modulator (TWEAM) is examined to ensure high efficiency in the RF range and wide bandwidth. In addition, the temperature-dependence electrical characteristics of TWEAM is investigated. Temperature dependent property variations were characterized using I-V and C-V measurement.

• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.303-308
• /
• 2008

Directly modulated fiber-optic links generally suffer higher link loss and larger signal distortion than externally modulated links. These result from the electron-photon conversion loss and laser modulation dynamics. As a method to overcome the drawbacks, we have experimentally demonstrated the RF performance of directly modulated, ultra-strong injection-locked gain-lever distributed Bragg reflector (DBR) lasers. The free-running DBR lasers exhibit an improved amplitude modulation efficiency of 12.4 dB under gain-lever modulation at the expense of linearity. By combining gain-lever modulation with ultra-strong optical injection locking, we can gain the benefits of both improved modulation efficiency from the gain-lever effect, plus improved linearity from injection locking. Using an injection ratio of R=11 dB, a 23.4-dB improvement in amplitude response and an 18-dB improvement in spurious-free dynamic range have been achieved.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권1호
• /
• pp.1-12
• /
• 2019

In this paper, we implement a navigation software of a Global Navigation Satellite System (GNSS) receiver based on a commercial purpose GNSS software receiver platform and verify its performance by performing experimental tests for various GNSS signals available in Korea region. The SX3, employed in this paper, is composed of an application program and a Radio Frequency (RF) frontend, and can capture and process multi-constellation and multi-frequency GNSS signals. All the signal processing procedure of SX3 is accessible by the receiver software designer. In particular for an easy research and development, the Application Programing Interface (API) of the SX3 has a flexible architecture to upgrade or change the existing software program, equipped with a real-time monitoring function to monitor all the API executions. Users can easily apply and experiment with the developed algorithms using a form of Dynamic Link Library (DLL) files. Thus, by utilizing this flexible architecture, the cost and effort to develop a GNSS receiver can be greatly reduced.

• 대한원격탐사학회지
• /
• 제35권6_1호
• /
• pp.987-997
• /
• 2019

최근 무인항공기(UAV)의 발전과 관심이 높아지면서 UAV의 수요가 급증하고 있다. 전통적인 방식의 인공위성 및 항공영상에 비해 적은 운용비용으로 효과적인 자료 취득이 가능하여 다양한 연구(환경, 지리정보, 해양관측, 원격탐사)에 활용되고 있다. 다만, 배터리 용량 및 관제시스템과 기체의 거리 제한에 따라 전통적인 원격탐사 방법인 위성과 항공기를 이용한 방법에 비해 좁은 면적만을 획득한다는 단점이 있다. 하지만 원거리 원격관제가 가능하다면 원격탐사 분야에서의 UAV의 활용 가능성은 더 높아질 수 있으며 이에 UAV와 관제 시스템의 거리에 상관없이 관제할 수 있는 통신 네트워크 시스템이 필요하다. 전통적인 방식의 무선장치(RF 2.4 GHz, 915 MHz, 433 MHz)로 UAV와 Ground Control System(GCS)가 송수신 할 수 있는 거리는 약 2 km 내외로 제한적이다. 하지만 구축되어 있는 Long-Term Evolution(LTE) 통신망 기반의 제어방식을 적용하면 Radio Frequency(RF) 통신망의 단점을 보완할 수 있어 기존 산업과 융합하여 보다 큰 효과를 이룰 수 있다. 본 연구에서는 LTE 통신방식을 통해 GCS 기준 최대 직선거리 6.1 km, 촬영 면적 2.2 ㎢, 총 비행 거리 41.75 km의 비행을 수행하였다. 또한, LTE 통신의 무선 기지국 현황을 통해 통신 두절 가능성에 대해서도 분석하였다.