• Journal of information and communication convergence engineering
• /
• v.5 no.2
• /
• pp.104-108
• /
• 2007

Ad hoc networks are a type of mobile network that function without any fixed infrastructure. One of the weaknesses of ad hoc network is that a route used between a source and a destination is to break during communication. To solve this problem, one approach consists of selecting routes whose nodes have the most stable link cost. This paper proposes a method for improving the low power distributed MAC. This method is based on the context awareness of the each nodes energy in clustering. We propose to select a new scheme to optimize energy conserving between the clustering nodes in MANET. And this architecture scheme would use context-aware considering the energy related information such as energy, RF strength, relative distances between each node in mobile ad hoc networks. The proposed networks scheme could get better improve the awareness for data to achieve and performance on their clustering establishment and messages transmission. Also, by using the context aware computing, according to the condition and the rules defined, the sensor nodes could adjust their behaviors correspondingly to improve the network routing.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.257-262
• /
• 2012

The Ministry of Information-Communication assigned 18~19GHz frequency band for communication of cabins and platform to link between subway/train and it's station. In this paper, we propose wireless transmission devices which are 2 stage hybrid low noise amplifier of 18GHz band and mixer for 18GHz as well to apply for RF receiver. We designed LNA to be noise matched its 1st stage and gain matched for 2nd stage and mixer using $180^{\circ}$ hybrid coupler to suppress the spurious signal. The transistors of 18 GHz LNA and mixer are NE3210S01 of NEC and KMB-N51-1, respectively. As the result of simulation, we get 19.92dB gain and 2.06dB noise figure with LNA and 8.61dB conversion loss with mixer.

• Journal of electromagnetic engineering and science
• /
• v.9 no.3
• /
• pp.152-158
• /
• 2009

We have developed a novel digital feedback predistortion(DFBPD) linearization based on RF feedback PD for the wide bandwidth modulated signals. The wideband PD operation is carried out by combining the DFBPD and memory lookup table(LUT). To experimentally demonstrate the linearization performance of the proposed PD technique for wideband signal, a class-AB amplifier using an LDMOSFET MRF6S23140 with 140-W peak envelope power is employed at 2.345 GHz. For a forward-link 2FA wideband code-division multiple-access signal with 10 MHz carrier spacing, the proposed DFBPD with memory LUT delivers the adjacent channel leakage ratio at an 10 MHz offset of -56.8 dBc, while those of the amplifier with and without DFBPD are -43.2 dBc and -41.9 dBc, respectively, at an average output power of 40 dBm. The experimental result shows that the new DFBPD with memory LUT provides a good linearization performance for the signal with wide bandwidth.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.285-290
• /
• 2006

In a Vehicle, Safety is the most important factor for drivers. It is well known that tire pressure lower than normal reduces the safety of the vehicle. In a consideration of active safety, tire pressure monitoring system is absolutely required. Tire pressure monitoring using in-tire pressure sensors with an RE data link have proven to be best approach to measuring tire pressure over the widest range of operating conditions. In this paper, we describe the parameters of TPMS, the characteristic of tire pressure and temperature compensation. These are the main factors to design the decision logic. We will show the guidelines for TPMS logic development considering environment variables and vehicle conditions.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.158-164
• /
• 2001

We presented a channel model for the inter vehicle radio link including the reflection from the road surface, side road vehicle and concrete wall. Then we theoretically derived the path loss and delay profile characteristics using the Ray tracing method efficiently analyzing millimeter wave or optic wave. Finally, we shown the improvement of propagation characteristics by diversity techniques, BCH coding and convolution coding techniques. At the result, MRC diversity techniques and BCH coding can't obtained PER = $10^{-6}$ which is considered to be data service criterion. But, we knew that Packet Error Rate Characteristic can obtained PER = $10^{-6}$, which is considered to be data service criterion, when convolution coding scheme are adopted in Rician fading.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.448-451
• /
• 2004

MSC (Multi-Spectral Camera) system is an electro-optical camera system which is being developed to be installed on KOMPSAT-2 satellite. High resolution image data from MSC system will be transmitted to the ground-station through x-band antenna called APS (Antenna Pointing System). APS is a directional antenna which will point to the receiving antenna at ground station while the satellite is passing over it. The APS needs to be controlled accurately to provide the reliable communication with big RF link margin. The APS is controlled by ATS (Antenna Tracking Software) which is included in the MSC software. ATS uses the closed loop control algorithm which will use TPF (Tracking Parameter File) as an input for antenna position, and will use two resolve readings from APS as a feedback. ATS has been developed and verified using APS QM (Qualification Model) and all the control parameters for ATS have been tested and verified. Various kinds of maximum, nominal and realistic dynamics for the APS movement have been simulated and verified. In this paper, closed loop servo control algorithm and obtained APS position error from the verification test with APS QM will be presented in detail

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.6
• /
• pp.612-620
• /
• 1987

In this paper, the optical modem for data link realization is designed with the advantages of optical fiber, large bandwidth, high speed and long haul communication. Modem interface, CCITT V.24 and EIA RS-232C is adopted for the compatibility with existing systems, and biphase coding format is used for digital modulation. And also, modem has serveral loopback test facility in order to diagnose system itself. Optical transmitter and receiver are designed to have the receiving sensitivity of -30dBm at $10^-9$BER in the short wavelength region. Developed system is capable of transmitting data rate at 1200bps up to 57.6Kbps in sync., and at any bps within DC to 200Kbps in async transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.834-840
• /
• 2012

The use of ranging sensors on automobiles is becoming common with the desire of traffic safety by providing drivers the information of the relative distance between the vehicles. In this paper, the LED visible light ranging system different from the conventional ranging systems using the RF signal is investigated. For such a system, we propose a novel ranging algorithm which combines the time-of-flight (TOF) with the CDMA technology. Via the CDMA technology, the TOF ranging system can accurately distinguish the desired ranging signal from the visible light interferences of the neighbor vehicles. In addition, the proposed system can also overcome the light noise from other luminaries, i.e. sun-light, traffic-light, and so on. The simulation results show that the CDMA-based LED ranging system has a significant improvement for the ranging accuracy compared with the case without employing the CDMA.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.559-571
• /
• 2008

Platform Screen Door(PSD) has been installed and operated at seoul subway line $1\sim4$ in the manual train operation mode(ATS/ATC) by SeoulMetro since 2005. SeoulMetro uses the wireless (RF) communication system and the train door detection system for the link between the train and PSD doors opening/closing motion in the manual train operation mode. For the convenience and safety of passengers, the train doors and the PSD doors opening/closing shall be synchronized as much as possible. In ATO(Automatic Train Operation) mode which provides the interface between train control system and PSD system, ATO signaling system makes the train doors and PSD doors open/close command signals systematically, so PSD doors can be opened/closed almost simultaneously with the train doors. But, in the manual train control(ATS/ATC) mode, PSD system needs to detect the train doors open/close operation and make PSD open/close command signals to actuate PSD doors. These PSD open/close commanding process cause time delay of PSD doors opening/closing motion in response to the train doors opening/closing motion. Sometimes the response delay time can be over 1 second, which is not proper to operate PSD, and need to be reduced This paper presents the reduction method of the PSD response delay time to improve the convenience and safety of passengers.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1285-1288
• /
• 2002

Bluetooth wireless technology is a publicly available specification proposed for Radio Frequency (RF) communication for short-range and point-to- multipoint voice and data transfer. It operates in the 2.4GHz ISM(Industrial, Scientific and Medical) band and offers the potential for low-cost, broadband wireless access for various mobile and portable devices at range of about 10 meters. In this paper, we describe the structure and the test results of the bluetooth baseband module we have developed. This module was developed based on IP reuse. So Interface of each module such as link controller UART, and audio CODEC is designed based on ARM7 comfortable processor. We also considered various interfaces of related external chips. The fully synthesizable baseband module was fabricated in a $0.25{\mu}m$ CMOS technology occupying $2.79{\times}2.8mm^2$ area including the ARM TDMI processor. And a FPGA implementation of this module is tested for file and bit-stream transfers between PCs.