• Proceedings of KOSOMES biannual meeting
• /
• 2007.11a
• /
• pp.51-55
• /
• 2007

As for satellite programs, the multipurpose satellite 1(KOMPSAT-1) was successfully launched on Dec. 21, 1999 and operated for three years. It is still properly operated even though its life cycle was ended. The development of KOMPSAT-2 (Korea Multipurpose Satellite-2) is near completion and the development of KOMPSAT-3, KOMPSAT-5 and COMS (Communication, Ocean, Meterological Satellite) are proceeding swiftly. In KORDI(Korea Ocean Research and Development Institute), the KOSC (Korea Ocean Satellite Center) construction project is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI(Geostationary Ocean Color Imager) instrument which is loaded on COMS(Communication, Ocean and Meteorological Satellite); it will be launched in 2000. Ansan(the headquarter of KORDD has been selected for the location of KOSC between 5 proposed sites, because it has the best condition to receive radio wave. The data acquisition system is classified antenna and RF. Antenna is designed to be ${\emptyset}$ 9m cassegrain antenna which has 19.35 $G/T(dB/^{\circ}K)$ at 1.67GHz, RF module, is divided into LNA(Low noise amplifier) and down converter, those are designed to send only horizontal polarization to modem The existing building is re-designed and classified for the KOSC operation concept; computing room, board of electricity, data processing room, operation room Hardware and network facilities have been designed to adapt for efficiency of each functions. The distribution system which is one of the most important systems will be constructed mainly on the internet, and it is also being considered constructing outer data distribution system as a web hosting service for to offering received data to user under an hour.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.541-545
• /
• 2014

Rec. ITU-R M.1842-1 is international recommendation for VHF band communication guideline in maritime mobile service RR Appendix 18 channels. In this paper, we simulate 28.8 kbps VHF ${\pi}$/4-DQPSK digital baseband modem compatible with the recommendation, then it is designed and implemented with FPGA. Cazac sequence is used as a preamble since packet format is not defined untill now in the recommendation. Baseband modem is designed by VHDL language and implemented on NEXYS4 development platform having Atrix7 FPGA chip from Xilinx. For wireless communication test of total prototype system, ADC/DAC board is implemented and EV9730 RF module is utilized. From the experimental results, implemented FPGA modem shows spectral bandwidth of 25 kHz and successful data exchanges between tx and rx communication platform.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.6
• /
• pp.631-636
• /
• 2010

With the growing trends of communication- broadcasting convergence, a hybrid IPTV that supports both IP network-based on-demand media and terrestrial or cable-based broadcast media is gaining attraction. This paper proposes a rich media framework for hybrid IPTV with support of the latest H.264 codec. For this purpose, we design and implement a media component and a RIA run-time engine customized for TV with the hybrid media. The media component has been designed to provide a uniform and efficient application interface to the various playback methods for RF broadcast and IP-based stored or live media. For performance and portability, it exploits media stream abstraction, adaptive on-demand I-frame search, and automatic calculation of play duration. Based on the proposed media interface, we develop a RIA run-time prototype. It has been carefully designed to fully utilize the built-in graphic acceleration hardware for optimized rendering in the resource-constrained IPTV environments. Demonstration and experiment results validate the performance and usefulness of the developed framework. The framework is expected to be used effectively to support graphics and hybrid media in the applications of IPTV-based VOD, advertisement, and education.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.57-62
• /
• 2020

The millimeter wave that uses the spectrum in the 30GHz~300GHz band has a shorter wavelength due to its high carrier frequency, so it is suitable for Massive MIMO systems because more antennas can be equipped in the base station. However, since an RF chain is required per antenna, hardware cost and power consumption increase as the number of antennas increases. Therefore, in this paper, we investigate antenna selection schemes to solve this problem. In order to solve the problem of high computational complexity in the exhaustive search based antenna selection scheme, we propose a approach of applying deep learning technology. An best antenna combination is predicted using a DNN model capable of classifying multi-classes. By simulation tests, we compare and evaluate the existing antenna selection schemes and the proposed deep learning-based antenna selection scheme.

• The KIPS Transactions:PartA
• /
• v.11A no.2
• /
• pp.123-128
• /
• 2004

Recent advancement in RF technology and wireless communications has enabled the development of noble networks. Bluetooth that can be used in various application field is a kind of WPAN(Wireless Personal Area Network) standard that is widely known. Bluetooth enables voice and data applications to operate simultaneously. Various applications have been implemented based on standard Profiles. In this paper, we describes the development of Biuetooth network AP(Access Point) system for network connection of Bluetooth devices. Unlike headset, mouse, and keyboard, the access point should have capability to support multiple connection and stabilized network throughput. We have designed and developed the hardware system, core stack and profiles on embedded system to comply with standard specification. Our system showed compatibility and good protocol performance through testing with lots of products that is available in market.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2006-2013
• /
• 2015

In this paper we propose a multi-protocol gateway system based on low power wireless communications. The proposed multi-protocol gateway system was designed to allow real-time monitoring and control of the on-site situation through wired and wireless networks by gathering information for streetlight power control and environmental monitoring. The sensing data using multi-sensors with composite processing that selectively used wired or wireless communication (e.g., CDMA, Ethernet (TCP/IP), GPS, etc.) were designed to act as intermediaries that transmitted to the main server through ZigBee. Inaddition, they were designed by separating a CPU board and baseboard to ensure low maintenance cost and ease of hardware replacement. The proposed multi-protocol gateway system's power, impact, continuous operation stability, and immunity test results obtained a normal operation success rate of over 95% and normal continuous operation results. Moreover, in the voltage drop test, instantaneous immunity test, and conductive RF electromagnetic field immunity test, it obtained an average rating result of "A".

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.820-823
• /
• 2011

WSN is composed of a lot of small sensors with the limited hardware resources. In WSN, at the initial stage, sensor nodes are randomly deployed over the region of interest, and self-configure the clustered networks by grouping a bunch of sensor nodes and selecting a cluster header among them. In this paper, we propose a self-configuration routing protocol for WSN, which consists of step-wise ripple routing algorithm for initial deployment, effective joining of sensor nodes. RRA is search node in RF-coverage of each node, which result in fast network connection, reducing overall power consumption, and extending the lifetime of network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.12
• /
• pp.1281-1288
• /
• 2012

This paper presents the design and implementation of a multi-mode mobile broadcasting Emergency Warning System (EWS) transmission and reception system which enables the propagation of disaster information using the encoding and transmission, reception and decoding methods specified in diverse mobile broadcasting standards. The implemented system supports global mobile broadcasting standards such as Terrestrial Digital Multimedia Broadcasting (T-DMB), Digital Video Broadcasting-Handheld (DVB-H), Integrated Services Digital Broadcasting-Terrestrial (ISDB-T), and the Digital Radio Mondiale (DRM) digital radio standard. The system consists of two key part: an encoding/transmission part and a reception/decoding part. The multi-mode mobile broadcasting EWS encoding and transmission system generates EWS data according to each broadcasting specification. The generated EWS data is then transmitted through a channel interface which meets the commercial broadcasting equipment specification. The receiver system receives and decodes the EWS data on a single hardware platform and can display the results on screen. Verification and conformity testing has been carried out on the implemented system by transmitting emergency data for each mode in real-time and displaying the received information in text on the receiver display.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.300-306
• /
• 2021

Due to the development of IT technology, hardware technologies applied to IoT equipment have recently been developed, so smart systems using low-cost, high-performance RF and computing devices are being developed. However, in the infrastructure environment where a large amount of IoT devices are installed, big data collection causes a load on the collection server due to a bottleneck between the transmitted data. As a result, data transmitted to the data collection server causes packet loss and reduced data throughput. Therefore, there is a need for an efficient big data collection technique in an infrastructure environment where a large amount of IoT devices are installed. Therefore, in this paper, we propose an efficient big data collection technique in an infrastructure environment where a vast amount of IoT devices are installed. As a result of the performance evaluation, the packet loss and data throughput of the proposed technique are completed without loss of the transmitted file. In the future, the system needs to be implemented based on this design.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2022

Radio frequency fingerprinting refers to a methodology that extracts hardware-specific characteristics of a transmitter that are unintentionally embedded in a transmitted waveform. In this paper, we put forward a fingerprinting feature and deep learning structure that can identify the same type of Digital Mobile Radio(DMR) by inputting the in-phase(I) and quadrature(Q). We proposes using the magnitude in polar coordinates of I/Q as RF fingerprinting feature and a modified ResNet-1D structure that can identify them. Experimental results show that our proposed modified ResNet-1D structure can achieve recognition accuracy of 99.5% on 20 DMR.