• Journal of the Korean Vacuum Society
• /
• v.14 no.4
• /
• pp.207-214
• /
• 2005

This paper presents a channel structure for promising high performance pseudomorphic high electron mobility transistor(pHEMT) switching device for design and fabricating of microwave control circuits, such as switches, phase shifters, attenuators, limiters, for application in personal mobile communication systems. Using the designed epitaxial channel layer structure and ETRI's $0.5\mu$m pHEMT switch process, single pole double throw (SPDT) Tx/Rx monolithic microwave integrated circuit (MMIC) switch was fabricated for 2.4 GHz and 5 GHz band wireless local area network (WLAN) systems. The SPDT switch exhibits a low insertion loss of 0.849 dB, high isolation of 32.638 dB, return loss of 11.006 dB, power transfer capability of 25dBm, and 3rd order intercept point of 42dBm at frequency of 5.8GHz and control voltage of 0/-3V These performances are enough for an application to 5 GHz band WLAN systems.

• 재활복지
• /
• v.18 no.4
• /
• pp.221-235
• /
• 2014

Recently, the frequency of stroke disease is increased due to the rapid aging population, and is contributed to the major occurrence factors of the posteriori acquired disability. This study is about an postural change device for the control of supine posture which is an assisted equipment using in daily rehabilitation process for overcoming the disability by the aftereffects of the stoke disease. In this paper, the existing domestic and Japan postural appliances is examined and its comparison and categorization is performed according to its functions and purposes. Here, in order to control the supine posture state, the design method for advanced multi functional system is proposed, which is devised to have an unified mattress control operations of combining the bedsore prevention tube with the supine posture tilting tube. And also, in addition of an smart function, it is designed to enable to perform an RF functions such as the monitoring of the present device state, the alteration of the basic position and the control of alternative floating and supine posture. This system control hardware consists of three main parts : the sensor detection part, the motor driving /control part, and the system control part for bluetooth communication. In results, we confirmed that the system designed by this research is possible to make it practical as an advanced smart postural change device combined by IoT technology in the application field of the recent IT technology.

• Journal of Korean Physical Therapy Science
• /
• v.30 no.1
• /
• pp.10-22
• /
• 2023

Background: The purpose of this study was to investigate the effect of brain education-based exercise and KPEM manual therapy integrated program on the sleep and quality of life of cancer patients. Design: Seventy subjects who were diagnosed with cancer and were undergoing treatment volunteered to participate in this study. All subjects used a nonequivalent control group pretest-posttest design for either the experimental group or the control group. In the final analysis, there were 25 subjects in the experimental group and 18 subjects in the control group. Methods: For 12 weeks, the experimental group performed brain education-based exercise (20 minutes) and KPEM manual therapy (50 minutes), and the control group performed basic physical therapy and autonomous exercise. For evaluation, the Korean version of the Pittsburgh Sleep Quality Index (PSQI-K) and the quality of life index were measured after intervention using the European Organization for Research and Treatment of Cancer (EORTC-3.0Ver). Effect between groups, time effect over time, and group^*time interaction were analyzed through a pre-test before and after the 12-week intervention period, and repeated measure ANOVA after 12 weeks of the integrated program intervention. All statistical significance levels were set at α=.05. Results: The PSQI in the time effect (p=.001) and the group^*time interaction (p<.001) were statistically significant. In terms of EORTC, QL2 and PF2 were significant in time effect (p=.024; p=.021) and group^*time interaction (p=.007; p=.021), whereas in RF2, significance was only found in group^*time interaction (p=.028). In symptom indicators, time effect was the only significant factor in FA, SL, AP, and CO, respectively (p=.002; p=.028; p=.041; p =.005) and in DY, there were significant differences in the time effect (p=.016) and group^*time interaction (p=.002). Conclusion: The brain education-based exercise and KPEM manual therapy integrated program effectively improves the sleep and quality of life of cancer patients. It is considered that this exercise and therapy can be actively used as a psychological, emotional, and physically complementary physical therapy intervention to improve the quality of life of cancer patients.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.8B
• /
• pp.509-520
• /
• 2007

In this paper, we propose a real-time sensor node platform that guarantees the real-time scheduling of periodic and aperiodic tasks through a multitask-based software decomposition technique. Since existing sensor networking operation systems available in literature are not capable of supporting the real-time scheduling of periodic and aperiodic tasks, the preemption of aperiodic task with high priority can block periodic tasks, and so periodic tasks are likely to miss their deadlines. This paper presents a comprehensive evaluation of how to structure periodic or aperiodic task decomposition in real-time sensor-networking platforms as regard to guaranteeing the deadlines of all the periodic tasks and aiming to providing aperiodic tasks with average good response time. A case study based on real system experiments is conducted to illustrate the application and efficiency of the multitask-based dynamic component execution environment in the sensor node equipped with a low-power 8-bit microcontroller, an IEEE802.15.4 compliant 2.4GHz RF transceiver, and several sensors. It shows that our periodic and aperiodic task decomposition technique yields efficient performance in terms of three significant, objective goals: deadline miss ratio of periodic tasks, average response time of aperiodic tasks, and processor utilization of periodic and aperiodic tasks.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.219-232
• /
• 2013

This paper presents a microstrip antenna which recovers its resonant frequency and impedance shifted automatically by the approach of other objects such as hands. This can be used for telemetry sensor applications in the ultrahigh frequency(UHF) industrial, scientific, and medical(ISM) band. It is the key element that an frequency-reconfigurable antenna could be electrically controlled. This antenna is miniaturized by loading the folded plates at both radiating edges, and varactor diodes are installed between the radiating edges and the ground plane to control the resonant frequency by adjusting the DC bias asymmetrically. Using this voltage-controlled antenna and the micro controller peripheral circuits of reading the returned level, the antenna is designed and fabricated which recovers its resonant frequency and impedance automatically. Designed frequency auto recovering antenna is conformed to be recovered within a few seconds when the resonant frequency and impedance are shifted by the approach of other objects such as hand, metal plate, dielectric and so on.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.59-64
• /
• 2002

In the RFID system using ISM-band, The tag mounted at the object has used the DC power by rectifying the RF signals of the small antenna for operating the micro-controller and memory. The performance of the tag would be reduced because of the second harmonics generated by the nonlinearity of the semiconductor and the spurious signal excited the high order mode of the antenna. This paper has realized the novel type low-pass filter with "the Stub-I type DGS slot structure" to improve the efficiency of the tag by suppressing the harmonics. The optimized frequency character at the pass-band/stop-band has obtained by tuning the stub width and slit width of I type slot. The measured result of the LPF has the cutoff frequency 3.25 GHz, the insertion loss about -0.29~-0.3 dB at pass-band 2.4 GHz~2.5 GHz, the return loss about -27.688~-33.665 dB at pass-band with a good performance, and the suppression character is about -19.367 dB at second harmonics frequency 4.9 GHz. This DGS LPF may be applied the various application as the RFID, WLAN to improve the efficiency of the system by suppressing the harmonics and spurious signals. 

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.89-94
• /
• 2006

A compact microstrip band-selective filter for ultra-wideband(UWB) radio system is proposed. The filter combines the traditional short-circuited stub highpass filter and coupled resonator band-stop filter on both sides of the mitered 50-ohm microstrip line. To realize the pseudo-highpass filtering characteristic over UWB frequency band(3.1 GHz to 10.6 GHz), a distributed highpass filter scheme is adopted. Three coupled resonators are utilized to obtain the band stop function at the desired frequency band. By meandering the coupled resonators, there is $29\;\%$ size reduction in footprint compared to the traditional band-stop filter using L-shaped resonators. The measured results show that the filter has a wide passband of $146.7\;\%$(2.1 GHz to 10.15 GHz) with low insertion loss and the stop band of $10.04\;\%$(5.2 GHz to 5.75 GHz) for 3-dB bandwidth. The measured group delay is less than 0.7 ns within the passband except the rejection band.

• Korean Journal of Veterinary Service
• /
• v.31 no.4
• /
• pp.497-504
• /
• 2008

A cross-sectional study was undertaken to report prevalence and to identify risk factors of subclinical mastitis of dairy cattle in Sylhet district of Bangladesh. Among 325 dairy farms of the district 12 farms(3.7%) were selected conveniently for this study. All the dairy cows of the 12 farms were selected for sample collection. Fresh milk samples from each of the selected dairy cows were collected aseptically in separate sterilized test tube as RF, RH, LF and LH quarter of the udder. Rapid modified White Side Test(WST) was used to detect subclinical mastitis(SCM). Results of WST and data derived from filled in questionnaire were entered in Microsoft Excel 2003 and transferred to $STATA^{(R)}$, version 8.0/Intercooled(Stata Corporation, Texas, USA, 2003). The overall prevalence of SCM and its distribution in different categories of variables in cow and their exact binomial 95% confidence intervals were calculated in $STATA^{(R)}$. Simple bivariable associations among independent variables were investigated by $x^2$ test in $STATA^{(R)}$. Multiple logistic regression analysis with backward elimination method was used to identify risk factors of SCM. To identify significant variation in quarter SCM, linear regression analysis was performed after arcsine transformation of the data. The overall prevalence of SCM found in this study is 54%. Dairy cows with teat lesions had significantly increased SCM(OR=12342, P value=0.000, 95% CI=762, 199798) than others without teat lesions. The Holstein Friesian X Jersey X Sahiwal breed has significantly decreased(OR=0.18, p=0.03, 95% CI 0.04, 0.85) SCM than other breeds. The prevalence of SCM found in this study is in agreement with others. The injury in the teat increases the probability of getting infected with microbes and thereby mastitis. If the prevalence of teat lesion can be decreased the probability of subclinical mastitis will also be decreased. The negatively associated Holstein Friesian X Jersey X Sahiwall breed may help in planning mastitis control program if this finding can be validated by a more powerful case-control or cohort study design.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1340-1350
• /
• 2009

The design and implementation of planar Active Phased Array Antenna System are described in this paper. This Antenna system operates at X-band with its bandwidth 10 % and dual polarization is realized using dual slot feeding microstrip patch antenna and SPDT(Single Pole Double Through) switch. Array Structure is $16\times16$ triangular lattice structure and each array is composed of TR(Transmit & Receive) module with more than 40 dBm power. Each TR module includes digital attenuator and phase shifter so that antenna beam can be electronically steered over a scan angle$({\pm}60^{\circ})$. Measurement of antenna pattern is conducted using a near field chamber and the results coincide with the expected beam pattern. From these results, it can be convinced that this antenna can be used with control of beam steering and beam shaping.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.477-483
• /
• 2018

A transparent antenna designed on the front glass of an automobile operating in the FM broadcast band(88~108 MHz) is proposed. A transparent antenna designed on the front glass of the automobile to avoid space limitation is typically positioned as a roof-mounted shark-fin antenna. An antenna designed on the front glass can reasonably solve the problems of low reception sensitivity and radiated interference from antennas for other service bands. The front glass has a unique closed-line structure, and this structure causes the surface current to flow to the front glass's surroundings; thus, the first resonance is caused before the broadcast band. Through the use of this closed-line structure, the surface current distribution is controlled, and an antenna for which the first resonance is operating in the frequency-modulated(FM) band can be designed. Moreover, the use of a micro-metal-mesh film that is a transparent electrode, suitable for designing a radio frequency device, enables the antenna to minimize visual perception through its transparency. The measured reflection coefficient($S_{11}$) of the antenna is less than -6 dB, and the average peak gain is -0.9 dB in the FM band. Experiments show that the transparent antenna on the front glass offers both the space and design freedom required to develop future automotive antennas.