• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.365-373
• /
• 2019

This paper investigates the performance of a hybrid single input multiple output radio frequency/free-space optics (SIMO-RF/FSO) communication system. Each SIMO-RF link is modeled as an independent and identically distributed (i.i.d.) Rayleigh distribution, while the FSO link follows a generalized $M{\acute{a}}laga$ (M) distribution. Considering the fixed gain amplify-and-forward (AF) relay and misalignment errors, novel expressions for the outage probability (OP), average bit error rate (ABER) and average capacity are derived. Numerical results show that atmospheric turbulence and misalignment errors can seriously impair the system performance, and the hybrid RF/FSO communication system using SIMO-RF links can greatly improve system performance. We also analyze system performance under different types of modulation schemes. Numerical results are verified by Monte Carlo simulations.

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.257-264
• /
• 2014

Through MCU model, Radio Frequency communication is completed using universal asynchronous receiver and transmitter. The communicatin with PC and MCU is completed using RS-232 cable. At first interconnected communication with PC and MCU is necessary for RF communication because tha UART is based technique for RF communication. Program imbeded in microcontroller unit is ran during RF signal is transmitted to other RF module. Data connected with PC and MCU is transmitted between PC and MCU during PC and MCU is connected.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.201-209
• /
• 2016

In wireless sensor networks (WSNs) duty cycling has been an imperative choice to reduce idle listening but it introduces sleep delay. Thus, the conventional WSN medium access control protocols are bound by the energy-latency tradeoff. To break through the tradeoff, we propose a radio wave sensor called radio frequency (RF) wakeup sensor that is dedicated to sense the presence of a RF signal. The distinctive feature of our design is that the RF wakeup sensor can provide the same sensitivity but with two orders of magnitude less energy than the underlying RF module. With RF wakeup sensor a sensor node no longer requires duty cycling. Instead, it can maintain a sleep state until its RF wakeup sensor detects a communication signal. According to our analysis, the response time of the RF wakeup sensor is much shorter than the minimum transmission time of a typical communication module. Therefore, we apply duty cycling to the RF wakeup sensor to further reduce the energy consumption without performance degradation. We evaluate the circuital characteristics of our RF wakeup sensor design by using Advanced Design System 2009 simulator. The results show that RF wakeup sensor allows a sensor node to completely turn off their communication module by performing the around-the-clock carrier sensing while it consumes only 0.07% energy of an idle communication module.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.666-668
• /
• 2004

본 논문에서는 RF를 이용한 다용도 디지털 데이터 통신 모듈의 설계와 제작에 관하여 논하였다. RF통신에 대한 기본적인 이론과 적용범위 등을 살펴보았고, 신뢰성 있는 통신을 위해 나름의 프로토콜을 적용하였다. 통신거리 개선을 위해 전력증폭기 시뮬레이션, 안테나 임피던스 매칭에 관한 연구를 해 보았다.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.387-389
• /
• 2010

유비쿼터스 컴퓨팅 환경에서 다양한 위치 기반 서비스(LBS)를 위해 객체 위치 인식은 필수적인 기술이다. 객체의 위치를 판별하기 위해서 GPS 시스템, 다수의 RF 신호 세기를 이용한 시스템이 이용되고 있다. GPS 시스템의 경우 고가의 수신기가 필요하며 실내 측위 환경에서 활용될 수 없으며, RF 신호를 이용한 위치 인식 시스템의 경우 빠른 신호 속도와 페이딩의 영향으로 충분한 신호의 해상도확보하기 어렵다. 하지만 상대적으로 느린 초음파를 이용한 경우 신호의 해상도가 높아 RF 기반 위치 측위 시스템보다 높은 정확도의 위치 인식이 가능하다. 초음파를 이용한 위치 인식 기술은 RF 통신을 통해 해당 초음파의 정보를 식별하고, 초음파와 RF 신호의 도달 시간의 차를 이용해 위치를 판별한다. 본 논문에서는 초음파 신호 부호화 기법을 통해 RF 통신 모듈 없이 다중 객체의 위치를 인식하는 시스템을 설계하고 구현한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1021-1024
• /
• 2000

본 논문에서는 영상 인식 기법 중의 하나인 UNL Transform 기법을 적용해서 RF 특성을 분석해 보았다. 이 특성 분석기를 바탕으로 RF PBA단의 진단기를 개발하는 과정을 보이고 있다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.733-740
• /
• 2001

A monitoring robot capable of doing network and RF communication is introduced. The robot has several features that poses arbitrary position thanks to a mechanism combining the 4wheel drive and 4 link mechanism, transmits an image and command data via RF wireless communication. Moreover, the image data from the camera are transferred through a network communication. The robot plays a role in monitoring what is happening around the robot, and covers wide range due to a moving camera associated with the 4 arms. The robot can adjust its mass center by the 4 link mechanism, hence it guarantees a stability in moving on the slope.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.583-584
• /
• 2022

Due to the development of drones, drone missions are performed in various fields, and BVLOS (Beyond Visual Line Of Sight) flight is performed in a wide area. Most drones operate through radio frequency (RF) communication and can only fly in a limited radius of about 1-2 km. To overcome this, in this paper, we propose a multi-communication protocol-based drone control system to control drones performing missions in BVLOS using RF and LTE (Long Term Evolution). The proposed system consists of a control unit and a drone unit. The control unit transmits one control signal generated from the remote controller through RF and LTE. The drone unit classifies the control signal transmitted through RF and LTE according to the priority of the communication protocol and delivers it to the FC (Flight Controller). Through the proposed control system, it is possible to overcome the RF communication distance limit and prevent the communication disconnection situation.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3064-3066
• /
• 1999

The existing equipment with wire communication can expect the stability of data transmission. However, according to increasing a number of DTE (Data Terminal Equipment), wiring work becomes a heavy burden. Restriction to application about portable DTE and the lack of flexibility are another drawback of wire communication. This paper presents the design and implementation of a RF (Radio Frequency) based wireless communication system. The RF based module is designed to the multi communication between DTEs. The RF based module consists of RF circuit and microprocessor. The main properties of RF circuit are maximum 5Kbps transmission rate, maximum 90m transmission distance and 433MHz frequency band. The microprocessor rearrange the data into AHDLC(Advanced High level Data Link Control) format and then instructs RF circuits to transmit/receive the data. The RF module have a wide application field such as fire/security alarm, remote control/measurement etc..

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.1180-1185
• /
• 2009

Database is constructed according to the development of information contents technology. But the construction of database using bio-information has not been developed. because it is difficult to collect bio-information. This paper presents how to construct database about sensing temperature and tilt of cow based on bio-information using RF communication. The system consists of 8bit micro-controller, tilt sensor, temperature sensor and RF module.