• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.364-364
• /
• 2012

평판 디스플레이 분야에 투명 비정질 산화물 반도체는 박막 트렌지스터(Thin film transistor; TFT)소자의 채널층으로 사용할 수 있다. 투명 비정질 산화물 반도체 IGZO (In-Ga-Zn-O)는 다른 비정질 재료에 비해 높은 전하 이동도를 가지기 때문에 우수한 성능의 TFT소자를 제작할 수 있다. 본 연구에서는 RF magnetron sputtering법으로 corning 1737 유리기판 위에 RF 파워의 변화에 따라 증착한 IGZO박막의 광학적 전기적 특성 변화를 연구하였다. 박막 증착 조건은 초기 압력 $2.0{\times}10^{-6}Torr$, 증착 압력 $2.0{\times}10^{-2}Torr$, 반응가스 Ar 25 sccm, 증착 온도는 실온으로 고정하였으며, 공정변수로 RF 파워를 25 w, 50 w, 75 w, 100 w로 변화시키며, IGZO 타겟은 $In_2O_3$, $Ga_2O_3$, ZnO 분말을 각각 1 : 1 : 2mol% 조성비로 혼합하여 소결한 타겟을 사용하였다. 표면분석(AFM)결과 RF 파워가 증가함에 따라 거칠기가 증가하였으며, XRD 분석결과 Bragg's 법칙을 만족하는 피크가 나타나지 않는 비정질 구조임을 확인할 수 있었다. 가시광 영역에서 (450~700 nm) 25 w일 때 85% 이상을 확인하였고, RF 파워가 증가할수록 밴드갭이 감소하는 것을 확인하였다. RF 파워가 100 w인 경우 carrier 밀도는 $7.7{\times}10^{19}cm^{-3}$, Mobility $8.42cm^2V-s$, Resistivity $9.45{\times}10^{-3}{\Omega}-cm$로 투명 전도막의 특성을 보였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1702-1707
• /
• 2010

As quantities of the data that transmitting by the wireless are more increased, the interest and application are extending about 802.11n that uses by combination two existing 20MHz wireless LAN Channel. 802.11n use dual band of 2.4GHz band and 5.8GHz. So this is expected in mass wireless transmission method because of interference evasion effect in compliance with the radio communication of existing 2GHz neighborhood band. Like this 802.11n uses the radio as well and transmits information there is not only a possibility of undergoing an influence in radio wave environment of circumference. Specially the interior environment and outdoor environment is a possibility of saying that will be defined with each other different modeling as affects in radio communication is different. In this paper, we'll compare the influence to RF feature (802.11n) by (Indoor/Outdoor) environment difference through compared with 802.11n RF feature and Network feature in (Indoor/Outdoor) environment and also examine the correlation between RF feature and Network feature.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.158-163
• /
• 2012

In this work, we have fabricated the $TiO_2$ thin films on Si and glass, polymer insulator substrates as the self-cleaning coating of polymer insulator. $TiO_2$ films were deposited by RF magnetron sputtering method with $TiO_2$ ceramic target and $TiO_2$ films of 100 nm thickness were fabricated with various RF powers. We have investigated the optical and surface, and structural properties of $TiO_2$ films prepared with various RF powers. As a result, the value of the contact angle of $TiO_2$ thin film is increased with increasing RF power and the value of the rms surface roughness is increased. The transmittance is decreased with increasing RF power. These results indicate that the variation of the surface and optical properties of $TiO_2$ thin films is related to the sputtering effects by increasing RF power.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.3
• /
• pp.282-288
• /
• 2014

In this paper, we have analyzed and designed a digital RF receiver based on the optimization of the dynamic range parameter to secure the wideband characteristics and linearity of digital radar receivers. To improve the wideband characteristics and dynamic range, a low noise amplifier is matching design with a noise source to minimize the noise figure in 1 GHz bandwidth and we improved the linearity of RF-receiver by securing the conversion gain characteristics of receiver through the design of active mixer. RF receiver is designed to give gain 63 dB, noise figure 1.2 dB and dynamic range of RF receiver has 75.8 dB in a wide band of 8.8~9.8 GHz. It is shown to be applicable to X-band digital radar receiver.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.371-377
• /
• 2015

This paper is about the RF transceiver designed and implementation for common data link. The trasmitter is configured as a frequency up-converter, a power amplifier and a duplexer. The receiver is configured as a duplxer, a frequency down-converter and a low noise amplifier. The maximum transmission distance, the reception sensitivity is designed to meet the electrical and temperature characteristics and the like. Using a modeling and simulation in order to meet the requirements of the RF transceiver has been designed and implemented. Transmitting output power and Noise Figure has been measured with 38.58dBm and 5.5dB, respectively. All of the electrical and temperature specifications was meet. Was confirmed all of the requirement specification by electrical characteristics test and temperature characteristics test.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.181-181
• /
• 2010

RF magnetron sputtering을 이용하여 RF power 및 공정 압력에 따라 ZnO 박막을 유리기판 위에 제작하고 구조적, 광학적, 전기적 특성을 조사하였다. 박막 증착 조건의 초기 압력은 $1.0{\times}10^{-6}\;Torr$, 증착온도는 상온으로 고정하였으며 기판은 Corning 1737 유리 기판을 사용하였다. 공정 변수로 RF파워는 25W, 50W, 75W, 100W로 변화시키고, 증착 압력은 20m, 100m, 200m 300mTorr로 변화시켰다. 유리기판 위에 증착된 모든 ZnO 박막에서 (002) 면의 우선배향성이 관찰되었고 RF power가 50 W와 75W 에서 좋은 결정성을 나타내었다. 공정조건별로 제작된 모든 ZnO박막에서 85% 이상의 투과율을 나타내었으며, 증착압력이 증가함에 따라 광학적인 밴드 갭이 증가하였다. Hall 측정 결과 모든 샘플에서 n타입 특성이 확인되으며, 75W와 300mTorr일 때 전기비저항 $3.56\;{\times}\;10^{+1}\;{\Omega}cm$, 전하의 농도 $2.8\;{\times}\;10^{17}cm^{-3}$, 이동도 $0.613\;cm^2V^{-1}s^{-1}$로 반도체 활성층으로 가장 적합한 전기적 특성을 얻었다. RF 파워가 증가하고, 증착압력이 증가할 수록 ZnO 박막 특성이 좋아지는 경향성을 확인하였다.

• Electrical & Electronic Materials
• /
• v.9 no.5
• /
• pp.490-497
• /
• 1996

RF마그네트론 스파터링에 의한 $sSnO_2$ 박막을 증착한 결과 작동조건에 따라 표면에서 막손상이 발생하였는데, 이는 target에서 생성된 높은 에너지의 고속입자가 기판에서 직접 충돌로 일어나며, 마그네트론의 자계분포와도 관계된다. 또한 기판의 위치에 따라 박막의 전기적, 구조적 특성이 급격히 변하는데 본 논문은 중심자석의 세기와 RF power, 가스압력, 그리고 기판온도 등의 스파터링 작동조건을 변화시키면서 박막의 비손상을 검토하였고, 물성특성을 평가하였다. 실험결과로 부터 기판의 외축부에서 제작된 박막은 전반적으로 막손상이 없었고, 특히 target의 중심자석을 Cobalt로 설치하고 15 mTorr의 가스압력과 50 W의 RF power로 한 경우 가장 우수한 특성을 가진 박막을 얻을 수 있었다. 추가로 막손상을 방지하고자, 환원형의 masking glass를 target위에 설치하였는데, 고에너지 입자의 직접 충돌을 확실히 차단할 수 있었으며, 비저항율도 target의 부식부위 (erosion)에 대응하는 부분에서 100배 정도로 개선하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.6
• /
• pp.927-934
• /
• 1999

A measuring system was integrated for the testing of live EED with continuous wave RF stimulus at low frequency range(1~250 MHz) and pulsed RF stimulus at high frequency range(8~10 GHz). The test system, set-up method and test procedure for the RF sensitivity of EED are described in this paper. The Bruceton method is applied to obtain distribution statistics such as mean firing level, standard deviation of the distribution and confidence levels for various applied firing signals.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.8
• /
• pp.36-46
• /
• 2010

In multi-GHz RF ICs and high-speed digital interfaces, ESD protection devices introduce considerable parasitic capacitance and resistance to inputs and outputs, thereby degrading the RF performance, such as input/output matching, gain, and noise figure. In this paper, the impact of ESD protection devices on the performance of RF ICs is investigated and design methodologies to minimize this impact are discussed. With RF and ESD test results, the 'RF/ESD co-design' method is discussed and compared to the conventional RF ESD protection method which focuses on minimizing the device size.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.327-332
• /
• 2008

New RF matcher module has been proposed in this paper for improvement of RF matcher in plasma etcher system using in semiconductor and display panel manufacturing process. New designed warm gear was used instead of bevel gear in new driving module, and control system was re-arranged with one-chip micro-process technique. The matching performance of new match module was improved in various process condition with reduction of backlash and matching time, and flexible motion of motor compared commercial match module. However this new type RF match module will improve the productivity in etching process of the mass production line.