• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.29-33
• /
• 2007

In this paper, time-varying parameter of passive telemetry RF sensor system is estimated using RLS(Rescursive $\leq$* Square) algorithm. In order to overcome the problems such as power limits and complication that general RF sensor system including IC chip has, the principle of inductive coupling is applied to model sensor system The model parameter is rearranged for applying RLS algorithm based on mathematical model to the derived model using inductive coupling principle. Time variant parameter of rearranged model is estimated using forgetting factor, and in case measured data is contaminated by noise and modelling error, the performance of RLS algorithm characterized by the convergence of squared error sum is verified by simulation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.8 no.4
• /
• pp.145-154
• /
• 1997

The $H_2$ and $H_2S$ sensing characteristics of Pd and Pd-Rh gate MOS sensor and the effect of Pd deposition condition on the hydrogen sensing performance of Pd gate MOS sensor was investigated. The increase of rf power and deposition temperature led to the decrease in the sensitivity and the initial response rate. The deposition temperature gave more effects on the decrease of the sensitivity and the initial response rate than the rf power. The sensitivity of Pd-Rh sensor gave better performance than pure Pd sensor. As the concentration of Rh in the gate increased, the sensitivity decreased. For Pd-Rh sensor, the sensitivity to $H_2$ was higher than that to $H_2S$. It was demonstrated that rf power, deposition temperature had an important role in the sensor performance.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10b
• /
• pp.526-528
• /
• 2004

본 논문은 센서 네트워크 환경에서 사용자 센싱을 통한 입력장치인 MGlove (Multiple-sensing Clove)의 구현에 대해 기술한다. 본 입력장치는 버튼 없이 2축 가속 센서, 2축 자기 센서, 포토 다이오드의 세 가지 종류의 센서를 사용하여 사용자의 손동작을 통해 입력을 감지하고 RF 모듈을 이용하여 무선으로 통신 가능하다. 구현한 MGlove는 유비 쿼터스 센서 네트워크 환경을 위한 입력 장치로 context-aware input device로의 발전 가능성이 있으며, 센서 추적 기법을 통해 사용자의 자세, 위치, 방향에 관계없이 입력 가능하고 RF모듈을 통해 먼 거리에서도 조작이 가능한 특징을 가진다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.397-401
• /
• 2008

센서 네트워크는 주변 데이터를 수집하기 위해 널리 퍼뜨려진 작고 저렴한 센서 노드를로 구성된 무선 네트워크 환경이다. 이러한 센서 네트워크는 배치의 편리성과 ad-hoc 적인 연결성, 저렴한 비용의 이 유로 다양한 목적의 응용프로그램에서 사용되고 있다. 그러나 센서 노드의 크기가 제한되기 때문에 센 서 노드의 유용한 전체적인 파워나 전력량의 크기에 제약을 가져온다. 그러므로, 센서 네트워크의 일반 적인 목적은 에너지 효율성을 고려하여 전체 네트워크의 성능을 저하시키지 않고 데이터를 수집하는 것이다. 본 논문에서는 에너지 효율성 증대 및 전체 네트워크의 유지 시간을 증가시키기 위해 각 센서가 가지는 RF 전송 레벨을 이용하여 노드 간의 거리를 통한 계층적 클러스터링 방법을 제안하고 비교 실험을 통해 전체 네트워크에 대한 에너지 효율성을 측정하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4C
• /
• pp.338-346
• /
• 2012

Wireless sensor network (WSN) technology provides a variety of medical and healthcare solutions to assist detection and communication of body conditions. However, data reliability inside WSN might be influenced to healthcare routing protocol due to limited hardware resources of computer, storage, and communication bandwidth. For this reason, we have conducted various wireless communication experiments between nodes using parameters such as RF strength, battery status, and deployment status to get a optimal performance of mobile healthcare routing protocol. This experiment may also extend the life time of the nodes. Performance analysis is done to obtain some important parameters in terms of distance and reception rate between the nodes. Our experiment results show optimal distance between nodes according to battery status and RF strength, or deployment status and RF strength. The packet reception rate according to deployment status and RF strength of nodes was also checked. Based on this performance evaluation, the optimized sensor node battery and deployment in the developed our mobile healthcare routing protocol were proposed.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.1
• /
• pp.49-54
• /
• 2009

This paper proposes a new approach to provide RF communication channel and electric power transmission to overcome the weakness of conventional tests, which may cause several problems. When an RF communication device is used to communicate between launch vehicle and launch complex in stead of using harness umbilical, it may draw the simplicity of ground test equipments, cost-saving, and the reduction of test time. In addition, if an RF power transmission device is adopted to supply on-board power of launch vehicle, it can replace expensive on-board batteries, which may be degraded easily by the repeated charging and discharging processes.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1674-1675
• /
• 2011

USN환경에서 다양한 정보를 획득하기 위한 수 십~수 천개의 배터리 기반 센서노드의 유지, 보수에 많은 시간과 비용이 소요되어 배터리 기반의 센서노드는 USN 산업의 한계점으로 작용한다. 이를 해결하기 위해 본 논문은 센서노드 배터리 충전용 무선전력획득 모듈을 제안한다. 무선전력전송장치가 전송하는 RF 전력을 전력획득모듈이 효과적으로 획득 및 효율적인 관리를 통해 센서노드가 정보를 센싱하고 전송하는데 소모하는 전력 및 자연 방전되는 배터리 전력을 보충한다. 무선전력획득모듈이 적용된 센서노드를 통해 배터리 전력을 일정하게 유지시켜 배터리 교환 주기를 반영구적으로 연장함으로써 USN의 신뢰성과 적용가능성을 높이고 USN산업의 활성화에 기여할 수 있다. 본 논문은 34dBm의 전력전송장치와 무선전력획득모듈 사이의 거리 5m에서 -2dBm의 전력을 획득하여 센서노드용 70mAh의 리튬폴리머 배터리의 충전을 통해 시스템을 검증하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.682-684
• /
• 2007

This paper deals the application of sensor network system to fabricate wireless nodes. This node includes a CPLD(XC2C256), FPGA(XC3S1000) a RF module(Bim-433-F), a Hall Sensor and I also develop the CPLD(EPGA) controlling with Verilog-HDL using ISE. The network was consisst of a PC, a Sink node as a gateway, and three Sensor nodes. This sensor network can reaches 40 m with RF interface using by multi-path network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.72-77
• /
• 2004

The purpose of this study is to develop temperature measurement system with Rf sensors on shoes dry process. The experimental results showed that the developed system successfully could be applied on real dry process to reduce defective shoes caused from insufficient dry with scientific data management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.21-28
• /
• 2010

Air pollution monitoring has attracted a lot of interests because it affects directly to the human life quality. The most of the current air pollution monitoring stations use the expensive and bulky instruments and are only installed in the specific area. Therefore, it is difficult to install them to as many places as people need. In this work, we constructed a low price and small size Radio Frequency(RF) sensor system to solve this problem. This system also had the measurement range similar to the ones used in the air pollution forecast systems. This system had the sensor unit to measure the air quality, the central processing unit for air quality data acquisition, the power unit to supply the power to every units, and the RF unit for the wireless transmission and reception of the data. This system was easy to install in the field. We also added a GPS unit to track the position of the RF-sensor in real time by wireless communication. For the various measurements of the air pollution, we used CO, $O_3$, $NO_2$ sensors as gas sensors and also installed a dust sensor.